Toro TMR-1 Data Sheet
TMR-1 (Maintenance Remote)
Controllers
This is irrigation maintenance at its easiest!
The Toro® TMR-1 is a maintenance remote system that
allows a single operator to perform irrigation checks and fully
operate the system from up to 1.5 miles away. Designed for
convenience and usability, the TMR-1 operates on unlicensed
MURS frequencies. This means optimum range without the
hassles of FCC licensing. Long-lasting power is guaranteed:
NiMH batteries or standard AA batteries and you’re ready
to go. A large, easy-to-read LCD, pushbutton operation and
intuitive command set make the TMR-1 easy to use and
operate. Built contractor-tough, nothing is easier for field
maintenance and operation.
Features & Benefits
Operates on Unlicensed MURS Frequencies
Up to 1.5 mile line-of-sight range without the hassles of
FCC licensing.
Toro Exclusive All Stations Cycle (ASC) Function
Provides one-start system operation for walk-throughs,
maximizing productivity – 2-minute runtimes per station.
Quick-Connect System (For Toro Controllers)
Allows receiver to easily be moved from one controller to
another; circular connector can be bracket-mounted or
mounted using 1/2” conduit.
Multi-Controller/Multi-Site Capability
Programmable address allowing selection of up to 999
different remote receivers at controllers.
TMR-1 (Maintenance Remote)
Specifications
Dimensions
• Receiver size: 12” x 3” (305 x 76mm) with antenna
• Transmitter size: 12” x 3” (305 x 76mm) with antenna
Electrical Specifications
• Receiver input voltage: 22-26 VAC input
• Transmitter DC Operating voltage: 4-6V DC
• Transmitter operates on 4 AA NiMH rechargeable batteries
or 4 AA standard alkaline batteries
• Receiver operates off of the 24 VAC power from the
controller
• FCC, UL-listed
Controller Compatibility
• Toro: TMC-212, TMC-424E, Custom Command, TIS-PRO,
TDC
Operating Specifications
• Frequency: MURS designated channels – U.S. USE
ONLY (151.82, 151.88, 151.94, 154.57, 154.6 MHz)
• Automatic detection and avoidance of busy channels
• Operating temperature range: -10° to 60° C
• Up to 1.5 miles (2,4 km) line-of-sight range and typically 1/2
mile (0,8 km) in obstructed areas
• Intuitive, easy-to-use keypad
• Large, easy-to-read LCD display
• Remotely controls up to 500 stations
• Battery life indicator
• Circular connector comes standard with 5’ (1,5m) cable
• Simple, intuitive command set
• Default run time is 10 minutes
• Display shows countdown of time left to run
• Ergonomic design and removable belt clip
Warranty
TMR-1 Kit: Transmitter, Receiver, Circular Connector/Cable
• Two years
Assembly, Carrying Case
Specifying Information— TMR-1
TMR-1-XXX
Model Description
TMR-1
TMR-1—Toro Maintenance Remote KIT—Complete Kit: Transmitter, Receiver, Circular Connector/Cable Assembly, Carrying Case
TX—Hand-held Transmitter
RX—Receiver, Circular Connector Assembly
CC—Circular Connector
Example: A complete TMR-1 Maintenance Remote Kit would be specified as: TMR-1-KIT
XXX
www.toro.com • The Toro Company • Irrigation Division • 5825 Jasmine St. • Riverside, CA • 92504 • 877-345-8676
Specications subject to change without notice. For more information, contact your local Toro distributor. P/N 11-1181-IRC
©2011 The Toro Company. All rights reserved.
Loading...