Toro Precision Series Spray Nozzles Sell Sheet

Precision™ Series

Spray Nozzle

Sprays

Male- or Female-threaded
Nozzles Fit Toro®, Irritrol

Rain Bird® and Hunter

®

®

Spray Bodies

The Patented H²O Chip

No Moving or Sonic Welded Parts

Toro’s Precision™ Series Spray Nozzles are the most
complete and efficient spray nozzle line available to help
irrigation professionals manage water use, eliminate runoff and
reduce customer water bills. The Precision™ Spray nozzles 1”/

hr. precipitation rate ensures that water is applied more slowly
and evenly without sacrificing landscape health. These nozzles
are available in a wide selection of arcs and radii, as well as male
and female threads, making them ideal for large scale installations
and retrofits. The Precision™ Series Spray Nozzles are now also
available in pressure-compensating versions, further enhancing
the best-in-class spray nozzle in the industry.

Features & Benefits

Patented H²0 Chip Technology

Using patented H²0 chip technology – and no moving parts – each
Precision Series Spray nozzles creates one or more high frequency oscillating streams to
achieve the desired arc and radius with 1/3 less water usage.

Maximize Irrigation Efficiency

Precision Spray nozzles deliver an industry first 1”/hr (25mm/hr) precipitation rate,
which better matches soil infiltration rate. This lower precipitation rate, along with high
distribution uniformity make this nozzles family the most
efficient nozzle from 5’-15’ (1,5-4,6m).

Assures no variation at the end of the water
arc for better edge definition and consistent,
reliable performance.

PSN with PCD Performs

Under Pressure!

Competitor’s High Flow Nozzle:

12H Nozzle at 50 PSI = 1.83GPM
or 2.45”/hr.*

Up To

60% Less

Water!

PSN with PCD Nozzle:

12H Nozzle at 50 PSI = 0.74 GPM
or 1”/hr.*

Pressure-Compensating Versions Available

Pressure-Compensating Precision™ Series Spray Nozzles maintain 1”/hr (25mm/hr.)
precipitation rate and minimizes misting up to inlet pressures to more than 40 PSI,
minimizing the need for a regulating head, at fraction of the cost.

Design and Retrofit Effectiveness

The lower flow rate of Precision Series spray nozzles maximizes design
efficiency and saves on overall material costs by using fewer valves and less
controller stations. In addition, existing systems with low pressure can be fixed with
a simple retrofit of the existing high-flow nozzle.

Third-Party Performance Validation

Precision™ Series Spray nozzles (non-Pressure-Compensating versions only) have
been tested and validated in the field and at the Center for Irrigation Technology (CIT).

Pressure Compensation Device

The elastomeric PCD disk opens and closes
in response to changes in inlet pressure
to maintain optimal performance, even
when the pressure rises higher than 40 psi.
The Pressure-Compensating versions are
indicated by the red stamped Toro logo,
while the non-Pressure-Compensated
versions are indicated by the white
stamped Toro logo.

*Based on internal flow rate test data in Riverside, CA.

Precision™ Series Spray Nozzle

5 Radii Available In

9 Arcs Plus Side and Corner Strips Available

Male & Female Threads

60°* 90° 120° 150°* 180° 210°* 240° 270° 360°

5’

8’

10’

12’

15’

(Left Corner Strip)

* Not available with Pressure-Compensation

Performance Data Pressure-Compensating Precision™ Series Spray Nozzles

Arc PSI GPM Radius

40 0.06 4.6 1.0 1.2

5Q

50 0.08 5.1 1.2 1.4

60 0.09 5.6 1.3 1.5

70 0.11 6.2 1.5 1.7

40 0.07 4.4 1.0 1.1

5T

50 0.11 4.9 1.3 1.5

60 0.15 5.5 1.7 2.0

70 0.19 6.0 2.0 2.4

40 0.10 4.4 1.0 1.2

5H

50 0.13 4.9 1.1 1.3

60 0.16 5.4 1.3 1.5

70 0.19 6.0 1.4 1.6

40 0.14 4.3 1.1 1.3

5TT

50 0.20 4.9 1.3 1.5

60 0.25 5.4 1.4 1.7

70 0.31 6.0 1.6 1.8

40 0.15 4.3 1.0 1.2

5TQ

50 0.21 4.9 1.2 1.4

60 0.26 5.6 1.4 1.6

70 0.32 6.2 1.5 1.7

40 0.17 4.0 1.0 1.2

5F

50 0.24 4.8 1.1 1.3

60 0.31 5.5 1.2 1.4

70 0.38 6.3 1.3 1.5

Arc PSI GPM Radius

40 0.34 12.0 1.0 1.2

12Q

50 0.39 12.2 1.1 1.3

60 0.43 12.5 1.2 1.3

70 0.48 12.7 1.2 1.4

40 0.46 11.5 1.0 1.2

12T

50 0.50 11.8 1.0 1.2

60 0.54 12.0 1.1 1.3

70 0.58 12.3 1.1 1.3

40 0.70 11.5 1.0 1.2

12H

50 0.75 11.8 1.0 1.2

60 0.80 12.2 1.1 1.2

70 0.85 12.5 1.1 1.2

40 0.90 11.4 1.0 1.2

12TT

50 1.03 11.5 1.1 1.3

60 1.16 11.5 1.2 1.3

70 1.29 11.6 1.2 1.4

40 1.05 11.4 1.0 1.2

12TQ

50 1.14 11.7 1.0 1.2

60 1.23 12.0 1.1 1.3

70 1.32 12.3 1.1 1.3

40 1.35 11.5 1.0 1.1

12F

50 1.49 11.8 1.0 1.2

60 1.63 12.2 1.1 1.3

70 1.77 12.5 1.1 1.3

Precip.Rate

 (in./hr.)

Precip.Rate

 (in./hr.)

Precip. Rate

 (in./hr.)

Precip. Rate

 (in./hr.)

Arc PSI GPM Radius

40 0.14 7.0 1.1 1.3

8Q

50 0.17 7.7 1.2 1.3

60 0.20 8.4 1.2 1.4

70 0.23 9.1 1.3 1.4

40 0.20 7.6 1.0 1.2

8T

50 0.24 8.0 1.1 1.3

60 0.27 8.5 1.2 1.4

70 0.31 8.9 1.3 1.5

40 0.26 7.0 1.0 1.2

8H

50 0.33 7.6 1.1 1.3

60 0.39 8.1 1.2 1.4

70 0.46 8.7 1.3 1.4

40 0.34 7.0 1.0 1.1

8TT

50 0.43 7.8 1.1 1.2

60 0.52 8.5 1.2 1.4

70 0.61 9.3 1.3 1.5

40 0.41 7.2 1.0 1.1

8TQ

50 0.48 7.9 1.1 1.2

60 0.55 8.6 1.1 1.3

70 0.62 9.3 1.2 1.4

40 0.55 7.0 1.1 1.2

8F

50 0.65 7.5 1.1 1.2

60 0.74 8.0 1.1 1.3

70 0.84 8.5 1.1 1.3

Arc PSI GPM Radius

40 0.53 14.2 1.0 1.2

15Q

50 0.59 14.5 1.1 1.2

60 0.64 14.8 1.1 1.3

70 0.70 15.1 1.2 1.3

40 0.72 14.3 1.0 1.2

15T

50 0.77 14.8 1.0 1.2

60 0.82 15.2 1.1 1.2

70 0.87 15.7 1.1 1.2

40 1.10 14.5 1.0 1.2

15H

50 1.20 14.3 1.1 1.2

60 1.29 14.0 1.1 1.3

70 1.39 13.8 1.2 1.3

40 1.45 14.5 1.0 1.2

15TT

50 1.57 14.8 1.0 1.2

60 1.68 15.0 1.1 1.2

70 1.80 15.3 1.1 1.3

40 1.60 14.0 0.9 1.0

15TQ

50 1.70 14.4 1.0 1.1

60 1.80 14.8 1.0 1.2

70 1.90 15.1 1.1 1.2

40 2.20 14.5 1.0 1.2

15F

50 2.36 14.8 1.0 1.2

60 2.52 15.1 1.1 1.2

70 2.68 15.4 1.1 1.3

Precip.Rate

 (in./hr.)

Precip.Rate

 (in./hr.)

4’ X 15’

4’ X 9’

LCS

Precip. Rate

 (in./hr.)

Precip. Rate

 (in./hr.)

4’ X 30’
4’ X 18’

SST

(Side Strip)

Arc PSI GPM Radius

40 0.26 9.5 1.0 1.1

10Q

50 0.28 10.0 1.1 1.2

60 0.29 10.5 1.1 1.3

70 0.31 11.1 1.2 1.4

40 0.31 9.5 1.0 1.1

10T

50 0.36 10.0 1.1 1.2

60 0.41 10.5 1.2 1.4

70 0.46 11.0 1.3 1.5

40 0.48 9.7 1.0 1.1

10H

50 0.53 10.1 1.1 1.2

60 0.57 10.4 1.1 1.3

70 0.62 10.8 1.2 1.4

40 0.63 9.6 1.0 1.1

10TT

50 0.70 9.9 1.1 1.2

60 0.77 10.3 1.1 1.3

70 0.84 10.6 1.2 1.4

40 0.71 9.5 1.0 1.1

10TQ

50 0.77 9.9 1.0 1.2

60 0.82 10.3 1.1 1.2

70 0.88 10.7 1.1 1.3

40 0.95 9.6 1.0 1.1

10F

50 1.06 10.0 1.1 1.2

60 1.16 10.5 1.1 1.3

70 1.27 10.9 1.2 1.4

Arc PSI GPM Radius

40 0.62 4x30 1.0 1.1

4X30

50 0.65 4x30 1.0 1.2

SST

60 0.67 4x30 1.1 1.3

70 0.70 4x30 1.1 1.3

40 0.32 4x15 1.0 1.2

4X15

50 0.33 4x15 1.1 1.2

LCS

60 0.34 4x15 1.1 1.3

70 0.35 4x15 1.2 1.3

40 0.32 4x15 1.0 1.2

4X15

50 0.33 4x15 1.1 1.2

RCS

60 0.34 4x15 1.1 1.3

70 0.35 4x15 1.2 1.3

40 0.36 4X18 1.0 1.1

4X18

50 0.37 4X18 1.0 1.2

SST

60 0.38 4X18 1.0 1.2

70 0.39 4X18 1.0 1.2

40 0.18 4X9 1.0 1.1

4X9

50 0.19 4X9 1.1 1.2

LCS

60 0.20 4X9 1.1 1.2

70 0.21 4X9 1.2 1.3

40 0.18 4X9 1.0 1.2

4X9

50 0.19 4X9 1.1 1.2

RCS

60 0.20 4X9 1.1 1.2

70 0.21 4X9 1.2 1.3

RCS

(Right Corner Strip)

Precip.Rate

 (in./hr.)

Precip.Rate

 (in./hr.)

4’ X 15’

4’ X 9’

Precip. Rate

 (in./hr.)

Precip. Rate

 (in./hr.)