How it Works
Toro
Loading...
P
Loading...
Loading...
Power Max 726 OE
Operator's Manual
32 pgs1.55 Mb0
Operator's Manual
32 pgs1.63 Mb0

Toro PowerMax 726 OE Operator's Manual

Download
Page 1
FormNo.3375-224RevB
PowerMax726OESnowthrower
ModelNo.38816—SerialNo.313000001andUp
Operator'sManual
Introduction
Thismachineisintendedtobeusedbyresidential homeownersorprofessional,hiredoperators.Itis designedprimarilyforremovingsnowfrompaved surfaces,suchasdrivewaysandsidewalks,andother surfacesfortrafconresidentialorcommercial properties.Itisnotdesignedforremovingmaterials otherthansnow,norisamodelwithapivotingscraper designedforclearingoffgravelsurfaces.
Readthisinformationcarefullytolearnhowtooperateand maintainyourmachineproperlyandtoavoidinjuryand machinedamage.Youareresponsibleforoperatingthe machineproperlyandsafely.
YoumaycontactTorodirectlyatwww .Toro.comformachine andaccessoryinformation,helpndingadealer,ortoregister yourmachine.
Wheneveryouneedservice,genuineToroparts,oradditional information,contactanAuthorizedServiceDealerorToro CustomerServiceandhavethemodelandserialnumbersof yourmachineready.Figure1identiesthelocationofthe modelandserialnumbersonthemachine.Writethenumbers inthespaceprovided.
g018884
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhassafety messagesidentiedbythesafetyalertsymbol(Figure2),
whichsignalsahazardthatmaycauseseriousinjuryordeath ifyoudonotfollowtherecommendedprecautions.
Figure2
1.Safetyalertsymbol
Thismanualuses2wordstohighlightinformation. Importantcallsattentiontospecialmechanicalinformation andNoteemphasizesgeneralinformationworthyofspecial attention.
ReplacementEngineOwner’sManualsmaybeordered throughtheenginemanufacturer.
Contents
Introduction..................................................................1
Training.................................................................3
Preparation.............................................................3
Operation...............................................................4
MaintenanceandStorage..........................................4
ToroSnowthrowerSafety.........................................4
SoundPressure.......................................................5
SoundPower..........................................................5
Vibration................................................................5
SafetyandInstructionalDecals.................................5
Setup............................................................................8
1InstallingtheUpperHandle....................................8
2InstallingtheTractionControlLinkage....................9
3InstallingtheChute..............................................10
4InstallingtheChuteControlRod............................10
5FillingtheEnginewithOil.....................................11
6CheckingtheTirePressure....................................11
7CheckingtheSkids...............................................12
8CheckingtheTractionDriveOperation...................12
ProductOverview.........................................................13
Operation....................................................................13
FreewheelingorUsingtheSelf-propelDrive...............13
FillingtheFuelTank...............................................14
StartingtheEngine.................................................15
StoppingtheEngine...............................................16
OperatingtheTractionDrive...................................17
OperatingtheSpeedSelector...................................17
OperatingtheAuger/ImpellerDrive.........................17
OperatingtheQuickStick®......................................18
©2012—TheToro®Company 8111LyndaleAvenueSouth Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3375-224*B
Page 2
UncloggingtheDischargeChute..............................18
PreventingFreeze-up..............................................18
OperatingTips......................................................19
Maintenance.................................................................20
RecommendedMaintenanceSchedule(s)......................20
PreparingforMaintenance.......................................21
CheckingtheEngineOilLevel.................................21
CheckingandAdjustingtheSkidsand
Scraper..............................................................21
CheckingandAdjustingtheTractionCable................21
CheckingandAdjustingtheAuger/Impeller
Cable................................................................22
CheckingtheAugerGearboxOilLevel......................22
ChangingtheEngineOil.........................................23
AdjustingtheDischargeChuteLatch........................23
ReplacingtheDriveBelts.........................................24
Storage........................................................................24
PreparingtheMachineforStorage............................24
RemovingtheMachinefromStorage.........................25
Troubleshooting...........................................................26
2
Page 3
Safety
BeforeOperating
?
?
Readandunderstandthecontentsofthis manualbeforeoperatingthesnowthrower . Becomefamiliarwithallcontrolsandknow howtostoptheenginequickly .
Operator 's Position
Thelow-speedaugerhasamovingpinch pointclosetotheopening.
Caution:Improperusemayresultin lossoffingers,hands,orfeet.
Thereisahigh-speed impellerclosetothe opening.
ThismachinemeetsorexceedstheISOstandard8437 ineffectatthetimeofproduction.
Readandunderstandthecontentsofthismanualbefore theengineiseverstarted.
Thisisthesafetyalertsymbol.Itisusedtoalertyou topotentialpersonalinjuryhazards.Obeyallsafety messagesthatfollowthissymboltoavoidpossibleinjury ordeath.
Improperlyusingormaintainingthismachinecould resultininjuryordeath.Toreducethispotential, complywiththefollowingsafetyinstructions.
Training
•Readtheoperatingandserviceinstructionmanual
carefully.Bethoroughlyfamiliarwiththecontrolsand theproperuseofthemachine.Knowhowtostopthe machineanddisengagethecontrolsquickly.
•Neverallowchildrentooperatethemachine.Neverallow
adultstooperatethemachinewithoutproperinstruction.
•Keeptheareaofoperationclearofallpersons,particularly
smallchildren,andpets.
•Exercisecautiontoavoidslippingorfalling,especially
whenoperatinginreverse.
Preparation
•Thoroughlyinspecttheareawherethemachineistobe
usedandremovealldoormats,sleds,boards,wires,and otherforeignobjects.
•Disengageallclutchesandshiftintoneutralbefore
startingtheengine.
•Donotoperatethemachinewithoutwearingadequate
wintergarments.Wearfootwearwhichwillimprove footingonslipperysurfaces.
•Handlefuelwithcare;itishighlyammable.
–Useanapprovedfuelcontainer. –Neveraddfueltoarunningorhotengine. –Fillfueltankoutdoorswithextremecare.Neverll
fueltankindoors.
–Replacegasolinecapssecurelyandwipeupspilled
fuel.
•Adjustthecollectorhousingheighttocleargravelor
crushedrocksurface.
•Neverattempttomakeanyadjustmentswhiletheengine
isrunning(exceptwherespecicallyrecommendedby manufacturer).
•Letengineandmachineadjusttooutdoortemperatures
beforestartingtoclearsnow.
•Theoperationofanypoweredmachinecanresultin
foreignobjectsbeingthrownintotheeyes.Alwayswear safetyglassesoreyeshieldsduringoperationorwhile performinganadjustmentorrepair.
3
Page 4
Operation
•Donotputhandsorfeetnearorunderrotatingparts.
Keepclearofthedischargeopeningatalltimes.
•Exerciseextremecautionwhenoperatingonorcrossing
graveldrives,walks,orroads.Stayalertforhidden hazardsortrafc.
•Afterstrikingaforeignobject,stoptheengine,remove
thewirefromthespark-plug,thoroughlyinspectthe machineforanydamage,andrepairthedamagebefore restartingandoperatingthemachine.
•Ifthemachineshouldstarttovibrateabnormally,stopthe
engineandcheckimmediatelyforthecause.Vibrationis generallyawarningoftrouble.
•Stoptheenginewheneveryouleavetheoperating
position,beforeuncloggingthecollector/impeller housingordischargeguide,andwhenmakinganyrepairs, adjustments,orinspections.
•Whencleaning,repairing,orinspecting,makecertainthe
collector/impellerandallmovingpartshavestopped. Disconnectthespark-plugwire,andkeepthewireaway fromtheplugtopreventaccidentalstarting.
•Donotruntheengineindoors,exceptwhenstartingit
andformovingthemachineinoroutofthebuilding. Opentheoutsidedoors;exhaustfumesaredangerous.
•Donotclearsnowacrossthefaceofslopes.Exercise
extremecautionwhenchangingdirectiononslopes.Do notattempttoclearsteepslopes.
•Neveroperatethemachinewithoutproperguards,plates,
orothersafetyprotectivedevicesinplace.
•Neveroperatethemachinenearglassenclosures,
automobiles,windowwells,drop-offs,etc.withoutproper adjustmentofthesnowdischargeangle.Keepchildren andpetsaway.
•Donotoverloadthemachinecapacitybyattemptingto
clearsnowattoofastarate.
•Neveroperatethemachineathightransportspeedson
slipperysurfaces.Usecarewhenreversing.
•Neverdirectdischargeatbystandersorallowanyonein
frontofthemachine.
•Disengagepowertothecollector/impellerwhenmachine
istransportedornotinuse.
•Useonlyattachmentsandaccessoriesapprovedby
themanufacturerofmachine(suchaswheelweights, counterweights,cabs,etc.).
•Neveroperatethemachinewithoutgoodvisibilityor
light.Alwaysbesureofyourfooting,andkeeparm holdonthehandles.Walk;neverrun.
•Neveroperatethemachinewithoutgoodvisibilityor
light.
•Takeallpossibleprecautionswhenleavingthemachine
unattended.Shiftintoneutral,settheparkingbrake,stop theengineandremovethekey.
MaintenanceandStorage
•Checkallfastenersatfrequentintervalsforproper
tightnesstobesurethemachineisinsafeworking condition.
•Neverstorethemachinewithfuelinthefueltankinsidea
buildingwhereignitionsourcesarepresentsuchashot waterandspaceheaters,clothesdryers,etc.Allowthe enginetocoolbeforestoringinanyenclosure.
•Alwaysrefertoowner’sguideinstructionsforimportant
detailsifthemachineistobestoredforanextended period.
•Maintainorreplacesafetyandinstructionslabels,as
necessary.
•Runthemachineafewminutesafterthrowingsnowto
preventfreeze-upofthecollector/impeller.
ToroSnowthrowerSafety
ThefollowinglistcontainssafetyinformationspecictoToro productsorothersafetyinformationthatyoumustknow.
•Rotatingrotorbladescaninjurengersorhands.
Staybehindthehandlesandawayfromthedischarge openingwhileoperatingthemachine.Keepyourface,
hands,feet,andanyotherpartofyourbodyor clothingawayfrommovingorrotatingparts.
•Beforeadjusting,cleaning,repairing,andinspectingthe
machine,andbeforeuncloggingthedischargechute,stop
theengine,removethekey,andwaitforallmoving partstostop.
•Usethesnowcleanouttool,notyourhands,toremove
obstructionsfromthedischargechute.
•Beforeleavingtheoperatingposition,stoptheengine,
removethekey,andwaitforallmovingpartstostop.
•Donotwearloose-ttingclothingthatcouldgetcaught
inmovingparts.
•Ifashield,safetydevice,ordecalisdamaged,illegible,or
lost,repairorreplaceitbeforebeginningoperation.Also, tightenanyloosefasteners.
•Donotsmokewhilehandlinggasoline.
•Donotusethemachineonaroof.
•Donottouchtheenginewhileitisrunningorsoonafter
ithasstoppedbecausetheenginemaybehotenoughto causeaburn.
•Performonlythosemaintenanceinstructionsdescribedin
thismanual.Beforeperforminganymaintenance,service, oradjustment,stoptheengine,removethekey,and disconnectthewirefromthesparkplug.Ifmajorrepairs areeverneeded,contactanAuthorizedServiceDealer.
•Donotchangethegovernorsettingsontheengine.
•Whenstoringthemachineformorethan30days,drain
thefuelfromthefueltanktopreventapotentialhazard.
4
Page 5
Storefuelinanapprovedfuelcontainer.Removethekey fromtheignitionswitchbeforestoringthemachine.
•PurchaseonlygenuineTororeplacementpartsand
accessories.
SoundPressure
Thismachinehasasoundpressurelevelattheoperator’sear of86dBA,whichincludesanUncertaintyValue(K)of1 dBA.Thesoundpressurelevelwasdeterminedaccordingto theproceduresoutlinedinENISO11201.
SoundPower
Thismachinehasaguaranteedsoundpowerlevelof102 dBA,whichincludesanUncertaintyValue(K)of3.75dBA. Thesoundpowerlevelwasdeterminedaccordingtothe proceduresoutlinedinENISO3744.
Vibration
Measuredvibrationlevelforthelefthand=3.3m/s
2
.
Measuredvibrationlevelfortherighthand=3.1m/s
2
.
UncertaintyValue(K)=1.6m/s
2
.
Themeasuredvaluesweredeterminedaccordingtothe proceduresoutlinedinENISO20643.
SafetyandInstructional Decals
Important:Safetyandinstructiondecalsarelocated
nearareasofpotentialdanger.Replacedamageddecals.
121–6823
1.Fast
3.Slow
2.Forwardspeeds4.Reversespeeds
121–6817
1.Cuttingdismemberment,impellerandcutting dismemberment,augerhazards—keepbystandersasafe distancefromthesnowthrower.
5
Page 6
121–1239
121–1240
Reorderpartno.120–7194
1.Tractiondrive—squeezethelevertoengage;releasethe levertodisengage.
4.Cuttingdismembermenthazard,impeller—keepaway frommovingparts;removetheignitionkeyandreadthe instructionsbeforeservicingorperformingmaintenance.
2.Warning—readtheOperator’sManual.5.Thrownobjecthazard—keepbystandersasafedistancefrom thesnowthrower.
3.Cutting/dismembermenthazard,impeller—donotplace
yourhandinthechute;stoptheenginebeforeleavingthe operatingposition,usethetooltoclearthechute.
6.Auger/impellerdrive—squeezethelevertoengage;release thelevertodisengage.
Briggs&StrattonPartNo.273676
1.Stop
3.Fast
2.Slow
Briggs&StrattonPartNo.275949
1.Chokeon(Choke)2.Chokeoff(Run)
Briggs&StrattonPartNo.276925
1.Warning—readthe
Operator'sManual.
3.Warning—toxicgas inhalationhazard.
2.Warning—rehazard.
4.Warning—hot surface/burnhazard.
Briggs&StrattonPartNo.277566
1.Whenstartingacold engine,closethechoke andpresstheprimertwo times.
2.Whenstartingawarm engine,openthechoke anddonotpressthe primer.
6
Page 7
Briggs&StrattonPartNo.277588
1.Primer3.Ignitionkeyout (Engine—Stop)
2.Ignitionkeyin
(Engine—Run)
Briggs&StrattonPartNo.278866
1.Fuel—On2.Fuel—Off
7
Page 8
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Handlebolts2 Curvedwashers
2
1
Locknuts2
Installtheupperhandle.
Hairpincotter2
2
Flatwasher3
Installthetractioncontrollinkage.
Nut2 Carriagebolt
2
3
Flatwasher2
Installthechute.
Carriagebolts
2
4
Locknuts2
Installthechutecontrolrod.
5
Nopartsrequired
–
Filltheenginewithoil.
6
Nopartsrequired
–
Checkthetirepressure.
7
Nopartsrequired
–
Checktheskids.
8
Nopartsrequired
–
Checktheoperationofthetractiondrive.
1
InstallingtheUpperHandle
Partsneededforthisprocedure:
2Handlebolts
2
Curvedwashers
2Locknuts
Procedure
1.Liftandrotatetheupperhandleandpositionitover thelowerhandle(
Figure3).
2.Install2handlebolts,2curvedwashers,and2locknuts inthelowerhandleholes(
Figure3).
Figure3
8
Page 9
2
InstallingtheTractionControl Linkage
Partsneededforthisprocedure:
2Hairpincotter
3Flatwasher
Procedure
1.Insertthelowerendoftherodintothelowerlinkarm sothatthebentendofthespeedcontrolrodfaces rearward(Figure4).
Figure4
2.Securethelowerendofthespeedcontrolrodwitha atwasherandahairpincotter(Figure4).
3.Placeaatwasheronthetrunnion(Figure5).
Figure5
1.Speedselectorlever
3.Innerwasher
2.Trunnion
4.Outerwasher
4.ShiftthespeedselectorleverintoPositionR2.
5.Rotatethelowerlinkarmfullyupward (counterclockwise)(Figure6).
Figure6
6.Pushdownonthespeedcontrolrodandinsertthe trunnionintotheholeinthespeedselectorlever (Figure5).
Note:Ifthetrunniondoesnottintothehole whenyouliftuponthespeedcontrolrod,rotatethe trunnionupwardordownwardonthespeedcontrol roduntilitts.
7.Securethetrunnionandupperendofthespeedcontrol rodwithawasherandahairpincotter.
Note:Foreasierinstallation,lookdownthroughthe openinginthespeedselector(Figure7).
Figure7
1.Speedselector
9
Page 10
3
InstallingtheChute
Partsneededforthisprocedure:
2Nut
2
Carriagebolt
2Flatwasher
Procedure
1.Placethechuteontheframeandthealignthedischarge chutemounttothechutesupport.
3
1
2
g019379
Figure8
1.Carriagebolt
3.Nut
2.Flatwasher
2.Securethedischargechutemountusing2bolts,2nuts, and2atwashers.
4
InstallingtheChuteControl Rod
Partsneededforthisprocedure:
2
Carriagebolts
2Locknuts
Procedure
1.UnwraptheQuickStickandrotateitsothatitis uprightandinthecenter.
2.Holdthebluetriggercapdownandpulltheleverfully rearward.
Note:Thedischargechuteanddeectorshouldface forward.Iftheydonot,holdthebluetriggercap down(butdonotmovetheQuickStick)androtatethe dischargechuteuntiltheydo.
3.Aligntheattenedbackendofthelongchutecontrol rodwiththeattenedfrontendoftheshortrod thatextendsfromthecontrolpanelsothattheynest together(
Figure9).
Figure9
1.Shortrod
2.Longchutecontrolrod
4.Insertthefrontendoftherodintotheopeningin thebackofthechutegearcoveruntilitslidesintothe chutegear(Figure10).
10
Page 11
g018885
Figure10
5.Aligntheholesinthenestedendsoftherodsand insert2carriagebolts(intheloosepartsbag)through theshortrodfromtheleftsideofthemachine(from theoperatingposition).
6.Insertthecableclipthatsupportsthedeector cableontotheforwardcarriagebolt,andsecurethe carriageboltswithlocknutsfromtheloosepartsbag (Figure11).
Figure11
1.Cableclip2.Deectorcable
7.HoldthebluetriggercapdownandrotatetheQuick Stickinacircletoensurethatthechuteanddeector operatesmoothly.
5
FillingtheEnginewithOil
NoPartsRequired
Procedure
Yourmachinecomeswithoilintheenginecrankcase.
Note:Beforestartingtheengine,checktheoilleveland addoilifnecessary.
UseautomotivedetergentoilwithanAPIserviceclassication ofSF ,SG,SH,SJ,SL,orhigher.Refertoyourengineowner's manual.
Use
Figure12belowtoselectthebestoilviscosityforthe
outdoortemperaturerangeexpected:
g019049
Figure12
EngineOilCapacities
Model
EngineOilCapacity
38816
18to20oz.(0.53to0.59l)
1.Removethedipstickandslowlypouroilintothe oillltubetoraisetheoilleveltotheFullmarkon thedipstick.Donotoverll(Figure13).Referto CheckingtheEngineOilLevelinMaintenance.
g018886
Figure13
2.Installthedipsticksecurely.
Note:Donotspilloilaroundtheoillltube;oilcould leakontotractionpartsandcausethetractiontoslip.
11
Page 12
6
CheckingtheTirePressure
NoPartsRequired
Procedure
Thetiresareoverinatedatthefactoryforshipping.Reduce thepressureequallyinbothtirestobetween17and20psi (116and137kPa).
7
CheckingtheSkids
NoPartsRequired
Procedure
RefertoCheckingandAdjustingtheSkidsinMaintenance.
8
CheckingtheTractionDrive Operation
NoPartsRequired
Procedure
CAUTION
Ifthetractiondriveisnotproperlyadjusted,the machinemaymoveinthedirectionoppositeof whatyouintended,causinginjuryand/orproperty damage.
Carefullycheckthetractiondriveandadjustit properly,ifnecessary.
1.Starttheengine;refertoStartingtheEngine.
2.MovethespeedselectortoPositionR1;referto OperatingtheSpeedSelector.
3.Squeezethelefthand(traction)levertothehand-grip (
Figure14).
Figure14
Themachineshouldmoverearward.Ifthemachine doesnotmoveormovesforward,completethe following:
A.Releasethetractionleverandstoptheengine.
B.Disconnectthetrunnionfromthespeedselector
lever(Figure5).
C.Turnthetrunniondownward(clockwise)onthe
speedcontrolrod(Figure5).
D.Connectthetrunniontothespeedselectorlever
(Figure5).
4.Releasethetractionlever.
5.MovethespeedselectortothePosition1;referto OperatingtheSpeedSelector.
6.Squeezethelefthand(traction)levertothehand-grip (
Figure14).
Themachineshouldmoveforward.Ifthemachine doesnotmoveormovesrearward,completethe following:
A.Releasethetractionleverandstoptheengine.
B.Disconnectthetrunnionfromthespeedselector
lever(Figure5).
C.Turnthetrunnionupward(counterclockwise)on
thespeedcontrolrod(Figure5).
D.Connectthetrunniontothespeedselectorlever
(Figure5).
7.Ifyoumadeanyadjustments,repeatthisprocedure untilnoadjustmentsarerequired.
Important:Ifthemachinemoveswhenthetraction leverisinthereleasedposition,checkthetractioncable (refertoCheckingandAdjustingtheTractionCable)or takethemachinetoanAuthorizedServiceDealerfor service.
12
Page 13
ProductOverview
g018887
Figure15
1.Hand-grip(2)
9.Dischargechute
2.Auger/impellerlever10.Scraper
3.Speedselectorlever
11.Auger
4.QuickStick™discharge chutecontrol
12.Skid(2)
5.Tractionlever13.Electricstarterbutton
6.Fueltankcap14.Electricstarterplug
7.Engineoillltube/dipstick15.Snowcleanouttool
8.Chutedeector
g018888
Figure16
1.Choke
5.Recoilstarter
2.Ignitionswitch
6.Oildrainplug
3.Fuelshutoffvalve
7.Primer
4.Throttle
Figure17
1.Snowcleanouttool(attachedtothehandle)
Operation
Note:Determinetheleftandrightsidesofthemachine
fromthenormaloperatingposition.
FreewheelingorUsingthe Self-propelDrive
Youcanoperatethesnowthrowerwiththeself-propelfeature engagedordisengaged(freewheeling).
Tofreewheel,slidethewheelsinwardandinserttheaxle pinsthroughtheaxleholes,butnotthroughthewheelhubs (Figure18).
g019015
Figure18
Toself-propel,axlepinthroughtheholesinthewheelhubs andtheinneraxleholes(Figure19).
g019014
Figure19
13
Page 14
FillingtheFuelTank
DANGER
Gasolineisextremelyammableandexplosive.A reorexplosionfromgasolinecanburnyouand others.
•Topreventastaticchargefromignitingthe gasoline,placethecontainerand/ormachine onthegroundbeforelling,notinavehicleor onanobject.
•Fillthetankoutdoorswhentheengineiscold. Wipeupspills.
•Donothandlegasolinewhensmokingoraround anopenameorsparks.
•Storegasolineinanapprovedfuelcontainer,out ofthereachofchildren.
•Forbestresults,useonlyclean,fresh,unleadedgasoline
withanoctaneratingof87orhigher((R+M)/2rating method).
•Oxygenatedfuelwithupto10%ethanolor15%MTBE
byvolumeisacceptable.
•DoNotuseethanolblendsofgasoline(suchasE15
orE85)withmorethan10%ethanolbyvolume. Performanceproblemsand/orenginedamagemayresult whichmaynotbecoveredunderwarranty.
•DoNotusegasolinecontainingmethanol.
•DoNotstorefueleitherinthefueltankorfuelcontainers
overthewinterunlessafuelstabilizerisused.
•DoNotaddoiltogasoline.
Important:Toreducestartingproblems,addfuel stabilizertothefuelallseason,mixingitwithgasoline lessthan30daysold.
Do not add oil to the gasoline.
g018889
Figure20
1.1-1/2inch(3.8cm)
14
Page 15
StartingtheEngine
1.Checktheengineoillevel.RefertoCheckingthe EngineOilLevelinMaintenance.
2.Turnthefuelshutoffvalve1/4turncounterclockwise toopenit(Figure21).
Figure21
3.Inserttheignitionkey(Figure22).
g018890
Figure22
1.Ignitionkey
4.Firmlypushintheprimerwithyourthumb2times (15°For-9°Corabove)or4times(below15°For
-9°C),holdingtheprimerinforasecondbefore releasingiteachtime(Figure23).
g018891
Figure23
5.RotatethechoketotheChokeposition(Figure24).
g018892
Figure24
6.MovethethrottletotheFastposition(Figure25).
Figure25
7.Startthemachinebypullingtherecoilstarteror pressingtheelectric-starterbutton(Figure26).
15
Page 16
g018893
Figure26
1.Electric-starterbutton3.Recoilstarter
2.Electricstarterplug
Note:Tousetheelectricstarter,connectapower cordtotheelectricstarterplugrstandthentoa poweroutlet.
Important:T opreventdamagingtheelectric starter,runitinshortcycles(5secondsmaximum, thenwaitoneminutebeforetryingtostartit again).Iftheenginestilldoesnotstart,take themachinetoanAuthorizedServiceDealerfor service.
8.Disconnectthepowercordfromthepoweroutletrst andthenfromthemachine.
9.Allowtheenginetowarmupforseveralminutes,move thechoketowardtheRunposition.Waitfortheengine torunsmoothlybeforeeachchokeadjustment.
CAUTION
Ifyouleavethemachinepluggedintoa poweroutlet,someonecaninadvertentlystart themachineandinjurepeopleordamage property.
Unplugthepowercordwheneveryouarenot startingthemachine.
StoppingtheEngine
1.MovethethrottletotheSlowposition,andthentothe Stopposition(Figure27).
Figure27
2.Waitforallmovingpartstostopbeforeleavingthe operatingposition.
3.Removetheignitionkey.
4.Closethefuelshutoffvalvebyrotatingitclockwise (Figure28).
Figure28
5.Pulltherecoilstarter3or4times.Thishelpsprevent therecoilstarterfromfreezingup.
16
Page 17
OperatingtheTractionDrive
CAUTION
Ifthetractiondriveisnotproperlyadjusted,the machinemaymoveinthedirectionoppositeof whatyouintended,causinginjuryand/orproperty damage.
Carefullycheckthetractiondriveandadjustit properly,ifnecessary;refertoCheckingtheTraction DriveOperationinSetupformoreinformation.
Important:Ifthemachinemoveswhenthetraction leverisinthereleasedposition,checkthetractioncable (refertoCheckingandAdjustingtheTractionCable)or takethemachinetoanAuthorizedServiceDealerfor service.
1.Toengagethetractiondrive,squeezethelefthand (traction)levertothehand-grip(Figure29).
Figure29
2.Tostopthetractiondrive,releasethetractionlever.
OperatingtheSpeedSelector
Thespeedselectorhas6forwardand2reversegears.To changespeeds,releasethetractionleverandshiftthespeed selectorlevertothedesiredposition(Figure30).Thelever locksinanotchateachspeedselection.
Figure30
OperatingtheAuger/Impeller Drive
1.Toengagetheauger/impellerdrive,squeezethe righthand(auger/impeller)levertothehandgrip (Figure31).
Figure31
2.Tostoptheaugerandimpeller,releasetherighthand lever.
Important:Whenyouengageboththe auger/impellerleverandthetractionlever,the tractionleverlockstheauger/impellerleverdown, freeingyourrighthand.Toreleasebothlevers, simplyreleasethelefthand(traction)lever.
3.Iftheaugerandimpellercontinuetorotatewhenyou releasetheauger/impellerlever,donotoperatethe machine.Checktheauger/impellercable(referto CheckingandAdjustingtheAuger/ImpellerCable) andadjustitifnecessary.Otherwise,takethemachine toanAuthorizedDealerforservice.
17
Page 18
WARNING
Iftheaugerandimpellercontinuetorotate whenyoureleasetheauger/impellerlever,you couldseriouslyinjureyourselforothers.
Donotoperatethemachine.T akeittoan AuthorizedServiceDealerforservice.
OperatingtheQuickStick
®
HoldthebluetriggercapdowntousetheQuickStickto movethedischargechuteandthechutedeector.Releasethe triggercaptolockthedischargechuteandchutedeector intoposition(Figure32).
Figure32
MovingtheDischargeChute
HoldthebluetriggercapdownandmovetheQuickStick tothelefttomovethedischargechutetotheleft;movethe QuickSticktotherighttomovethedischargechutetothe right(Figure33).
g018894
Figure33
•Ifthechutedoesnotmove,refertoAdjustingthe
DischargeChuteLatch.
•Ifthechutedoesnotturnasfartotheleftasitdoesto
theright,ensurethatthecableisroutedtotheinsideof thehandles.RefertoInstallingtheUpperHandle.
•Ifthechutedoesnotlockintoplacewhenyoureleasethe
triggercap,refertoAdjustingtheDischargeChuteLatch.
MovingtheChuteDeector
HoldthebluetriggercapdownandmovetheQuickStick forwardtolowerthechutedeector;moveitrearwardtoraise thechutedeector(
Figure34).
Figure34
UncloggingtheDischarge Chute
Iftheauger/impellerisrunningbutthereisnosnowcoming outofthedischargechute,thedischargechutemaybe clogged.
•Tounclogthedischargechute,stayintheoperating
positionandreleasethelefthand(traction)lever.While runningtheauger/impeller,pushdownonthehandlesto raisethefrontofthemachineafewinches(centimeters) offthepavement.Thenliftthehandlesquicklytobump thefrontofthemachineonthepavement.Repeatif necessaryuntilastreamofsnowcomesoutthedischarge chute.
•Ifyoucannotunclogthedischargechutebybumping
thefrontofthemachine,stoptheengine,waitforall
movingpartstostop,anduseastick;neveruseyour hand.
Important:Uncloggingthedischargechuteby bumpingthefrontofthemachineonthepavement maycausetheskidstomove.Adjusttheskidsand tightentheskidboltssecurely.
PreventingFreeze-up
•Insnowyandcoldconditions,somecontrolsandmoving
partsmayfreeze.Donotuseexcessiveforcewhen tryingtooperatefrozencontrols.Ifyouhavedifculty
18
Page 19
operatinganycontrolorpart,starttheengineandletit runforafewminutes.
•Afterusingthemachine,lettheenginerunforafew
minutestopreventmovingpartsfromfreezing.Engage theauger/impellertoclearanyremainingsnowfrom insidethehousing.RotatetheQuickSticktopreventit fromfreezing.Stoptheengine,waitforallmovingparts tostop,andremovealliceandsnowfromthemachine.
•Withtheengineoff,pulltherecoilstarterhandleseveral
timesandpushtheelectric-starterbuttononcetoprevent therecoilandelectricstartersfromfreezingup.
OperatingTips
DANGER
Whenthemachineisinoperation,theimpellerand augercanrotateandcutofforinjurehandsandfeet.
•Beforeadjusting,cleaning,inspecting, troubleshooting,orrepairingthemachine,stop theengineandwaitforallmovingpartstostop. Disconnectthewirefromthesparkplugand keepitawayfromtheplugtopreventsomeone fromaccidentallystartingtheengine.
•Removeanobstructionfromthedischarge chute;refertoUncloggingtheDischargeChute. Ifnecessary,useastick,notyourhands,to removeanobstructionfromthedischargechute.
•Staybehindthehandlesandawayfromthe dischargeopeningwhileoperatingthemachine.
•Keepface,hands,feet,andanyotherpartof yourbodyorclothingawayfromconcealed, moving,orrotatingparts.
WARNING
Therotorbladescanthrowstones,toys,andother foreignobjectsandcauseseriouspersonalinjuryto theoperatorortobystanders.
•Keeptheareatobeclearedfreeofallobjects thattherotorbladescouldpickupandthrow.
•Keepallchildrenandpetsawayfromthearea ofoperation.
•AlwayssetthethrottletotheFastpositionwhenthrowing
snow .
•Iftheengineslowsdownunderaloadorthewheelsslip,
shiftthemachineintoalowergear.
•Ifthefrontofthemachineridesup,shiftthemachine
intoalowergear.Ifthefrontcontinuestorideup,liftup onthehandles.
19
Page 20
Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst2hours
•Inspectthetractioncableandadjustitifnecessary.
•Inspecttheauger/impellercableandadjustitifnecessary .
Aftertherst5hours
•Changetheengineoil.
Beforeeachuseordaily
•Checktheengineoillevelandaddoilifnecessary.
Every25hours
•Changetheengineoil.
Yearly
•Checktheskidsandthescraperandadjustthemifnecessary.
•Inspectthetractioncableandadjustorreplaceitifnecessary.
•Inspecttheauger/impellercableandadjustorreplaceitifnecessary.
•Checktheaugergearboxoilandaddoilifnecessary .
Yearlyorbeforestorage
•Checktheairpressureinthetiresandinatethemto17–20psi(116–137kPa).
•Drainthegasolineandruntheenginetodryoutthefueltankandthecarburetorat theendoftheseason.
•HaveanAuthorizedServiceDealerinspectandreplacethetractiondrivebeltand/or theauger/impellerdrivebelt,ifnecessary.
Important:Youcanndmoreinformationaboutmaintainingandservicingyourmachineatwww.Toro.com.
Important:Refertoyourengineoperator'smanualforadditionalmaintenanceprocedures.Forengineadjustments,
repairs,orwarrantyservicenotcoveredinthismanual,contactanAuthorizedBriggs&StrattonServicingDealer.
20
Page 21
PreparingforMaintenance
1.Movethemachinetoalevelsurface.
2.Stoptheengineandwaitforallmovingpartstostop.
3.Disconnectthesparkplugwire.RefertoReplacing theSparkPlug.
CheckingtheEngineOilLevel
ServiceInterval:Beforeeachuseordaily—Checktheengine
oillevelandaddoilifnecessary.
1.Removethedipstick,wipeitclean,thenfullyinstall thedipstick.
2.Removethedipstickandchecktheoillevel(
Figure35). IftheoillevelisbelowtheAddmarkonthedipstick, addoil.RefertoFillingtheEnginewithOil.
g018886
Figure35
CheckingandAdjustingthe SkidsandScraper
ServiceInterval:Yearly—Checktheskidsandthescraper
andadjustthemifnecessary.
Checktheskidsandthescrapertoensurethattheaugerdoes notcontactthepavedorgravelsurface.Adjusttheskidsand thescraperasneededtocompensateforwear.
1.Checkthetirepressure.RefertoCheckingtheTire Pressure.
2.Loosenthenutsthatsecurebothskidstotheauger sidesuntiltheskidsslideupanddowneasily.
g019046
1
Figure36
1.1/8inch(3mm)
Important:Theaugerbladesmustbesupported abovethegroundbytheskids.
3.Ensurethatthescraperis1/8inch(3mm)aboveand paralleltoalevelsurface.
Note:Ifthepavementiscracked,rough,oruneven, adjusttheskidstoraisethescraper.Forgravelsurfaces, adjusttheskidsfurtherdowntopreventthemachine frompickinguprocks.
4.Movetheskidsdownuntiltheyareevenwiththe ground.
5.Firmlytightenthenutsthatsecurebothskidstothe augersides.
Note:Toquicklyadjusttheskidsiftheyloosen, supportthescraper1/8inch(3mm)offthepavement, thenadjusttheskidsdowntothepavement.
Note:Iftheskidsbecomeexcessivelyworn,youcan turnthemoverandsettheunusedsidetowardthe pavement.
CheckingandAdjustingthe TractionCable
ServiceInterval:Aftertherst2hours—Inspectthe
tractioncableandadjustitifnecessary.
Yearly—Inspectthetractioncableandadjustor replaceitifnecessary.
Ifthemachinedoesnotdriveintheforwardorreversespeeds oritdriveswhenyoureleasethetractionlever,adjustthe tractioncable.
Ifthelefthand(traction)cableisnotproperlyadjusted,do thefollowingsteps:
1.Loosenthejamnut.
2.Engagethetractionleverandholditinplace (
Figure37).
21
Page 22
Figure37
3.Loosenortightentheturnbuckletoadjustthespring lengthto2.18inches(5.5cm).
3
g019048
4
Figure38
1.Jamnut
3.Spring
2.Turnbuckle
4.2.18inches(5.5cm)
4.Tightenthejamnut(Figure38),ensuringthereisslight tensiononthecable.
5.Ifthetractioncableisproperlyadjustedbutaproblem remains,contactanAuthorizedServiceDealer.
CheckingandAdjustingthe Auger/ImpellerCable
ServiceInterval:Aftertherst2hours—Inspectthe
auger/impellercableandadjustitif necessary.
Yearly—Inspecttheauger/impellercableandadjust orreplaceitifnecessary.
1.Loosenthejamnut.
2.Engagetheauger/impellerleverandholditinplace (
Figure39).
Figure39
3.Loosenortightentheturnbuckletoadjustthespring lengthto2.75inches(7cm)(Figure40).
2
1
3
g019047
4
Figure40
1.Jamnut
3.Spring
2.Turnbuckle
4.2.75inches(7cm)
4.Tightenthejamnut(Figure40),ensuringthereisslight tensiononthecable.
5.Iftheauger/impellercableisproperlyadjustedbut aproblemremains,contactanAuthorizedService Dealer.
CheckingtheAugerGearbox OilLevel
ServiceInterval:Yearly—Checktheaugergearboxoiland
addoilifnecessary.
1.Movethemachinetoalevelsurface.
2.Cleantheareaaroundthepipeplug(
Figure41).
22
Page 23
Figure41
3.Removethepipeplugfromthegearbox.
4.Checktheoillevelinthegearbox.Theoilshouldbe 3/8inch(9.5mm)belowthelleropening.
5.Iftheoillevelislow ,addGL-5orGL-6,SAE85-95 EPtransmissionoiltothegearboxuntilthepointof overow .
Note:Donotusesyntheticoil.
6.Installthepipepluginthegearbox.
ChangingtheEngineOil
ServiceInterval:Aftertherst5hours—Changetheengine
oil.
Every25hours/Yearly(whichevercomes rst)—Changetheengineoil.
Ifpossible,runtheenginejustbeforechangingtheoilbecause warmoilowsbetterandcarriesmorecontaminants.
UseautomotivedetergentoilwithanAPIserviceclassication ofSF ,SG,SH,SJ,SL,orhigher.Refertoyourengineowner's manual.
Use
Figure42belowtoselectthebestoilviscosityforthe
outdoortemperaturerangeexpected:
g019049
Figure42
EngineOilCapacities
EngineOilCapacities(cont'd.)
Model
EngineOilCapacity
38816
18to20oz.(0.53to0.59l)
1.Cleantheareaaroundtheoildraincap(Figure43).
Figure43
1.Oildraincap
2.Slideanoildrainpanunderthedrainextensionand removetheoildraincap.
3.Draintheoil.
Note:Disposeoftheusedoilproperlyatalocal recyclingcenter.
4.Installtheoildraincap.
5.Fillthecrankcasewithoil.RefertoFillingtheEngine CrankcasewithOil.
AdjustingtheDischargeChute Latch
Ifthedischargechutedoesnotlockintothedesiredposition ordoesnotunlocksothatyoucanmoveittoanother position,adjustthedischargechutelatch.
1.Loosentheclampfasteneronthechutesupportplate untilthecableisfree.
g019021
1
2
3
Figure44
1.Cableconduit3.Clampfastener
2.Cableclamp
23
Page 24
2.Removeanyslackinthecablebypullingthecable conduitrearward.
3.Tightentheclampfastenerwhileholdingthecablein place.
ReplacingtheDriveBelts
Iftheauger/impellerdrivebeltorthetractiondrivebelt becomesworn,oil-soaked,orotherwisedamaged,goto www.Toro.comforadditionalserviceinformationorhavean AuthorizedServiceDealerreplacethebelt.
Storage
WARNING
•Gasolinevaporscanexplode.
•Donotstoregasolinemorethan30days.
•Donotstorethemachineinanenclosurenear anopename.
•Allowtheenginetocoolbeforestoringit.
PreparingtheMachinefor Storage
1.Onthelastrefuelingoftheyear,addfuelstabilizerto freshfuelasdirectedbytheenginemanufacturer.
2.Runtheenginefor10minutestodistributethe conditionedfuelthroughthefuelsystem.
3.Loosenthehoseclampthatsecuresthefuellinetothe valveandslidethefuellineoffthefuelshutoffvalve.
4.Openthefuelshutoffvalveandallowthefueltodrain outofthefueltankintoanapprovedfuelcontainer.
5.Installthefuellineontothefuelshutoffvalveand secureitwithahoseclamp.
6.Runthemachineuntiltheenginestopsfromrunning outoffuel.
7.Primetheengineandstartitagain.
8.Allowtheenginetorununtilitstops.Whenyoucan nolongerstarttheengine,itissufcientlydry.
9.Stoptheengineandallowittocool.
10.Removetheignitionkey.
11.Disconnectthesparkplugwire.
12.Removethesparkplug,add1oz.(30ml)ofoilthrough thesparkplughole,andpullthestarterropeslowly severaltimestodistributeoilthroughoutthecylinder topreventcylindercorrosionduringtheoff-season.
13.Looselyinstallthesparkplug.
14.Disposeofanyunusedfuelproperly.Recycleit accordingtolocalcodes,oruseitinyourautomobile.
Note:Donotstorestabilizedfuelformorethan 90days.
15.Cleanthemachinethoroughly.
16.Touchupchippedsurfaceswithpaintavailablefroman AuthorizedServiceDealer.Sandaffectedareasbefore painting,andusearustpreventativetopreventthe metalpartsfromrusting.
17.Tightenallloosescrews,bolts,andlocknuts.Repairor replaceanydamagedparts.
18.Coverthemachineandstoreitinaclean,dryplace outofthereachofchildren.Allowtheenginetocool beforestoringitinanyenclosure.
24
Page 25
RemovingtheMachinefrom Storage
1.Removethesparkplugandspintheenginerapidly usingthestartertoblowtheexcessoilfromthe cylinder.
2.Installthesparkplugbyhandandthentorqueitto 15ft-lb(20.4N-m).
3.Connectthesparkplugwire.
4.Performtheannualmaintenanceproceduresasgiven intheRecommendedMaintenanceSchedule.
25
Page 26
Troubleshooting
Problem
PossibleCauseCorrectiveAction
1.Thepowercordisdisconnectedatthe outletorthemachine.
1.Connectthepowercordtotheoutlet and/orthemachine.
2.Thepowercordisworn,corroded,or damaged.
2.Replacethepowercord.
Electricstarterdoesnotturn(electric-start modelsonly)
3.Thepoweroutletisnotenergized.
3.Haveaqualiedelectricianenergize theoutlet.
1.Thekeyisnotintheignitionorisinthe Stopposition.
1.Insertthekeyintotheignitionandturn ittotheOnposition.
2.ThechokeisintheOffpositionandthe primerhasnotbeenpressed.
2.MovethechoketotheOnpositionand presstheprimer3times.
3.Thefuelshutoffvalveisnotopen.3.Openthefuelshutoffvalve.
4.ThethrottleisnotintheFastposition.4.MovethethrottletotheFastposition.
5.Thefueltankisemptyorthefuel systemcontainsstalefuel.
5.Drainand/orllthefueltankwithfresh gasoline(notmorethan30daysold). Iftheproblempersists,contactan AuthorizedServiceDealer.
6.Thesparkplugwireislooseor disconnected.
6.Connectthewiretothesparkplug.
7.Thesparkplugispitted,fouled,orthe gapisincorrect.
7.Checkthesparkplugandadjustthe gapifnecessary .Replacethespark plugifitispitted,fouled,orcracked.
8.Thefuelventcapisrestricted.
8.Removetheventrestrictionorreplace thefuelcap.
Enginedoesnotstartorstartshard
9.Theengineoillevelintheengine crankcaseistoolowortoohigh.
9.Addordrainoiltoadjusttheoillevelin theenginecrankcasetotheFullmark onthedipstick.
1.ThechokeisintheOnposition.1.MovethechoketotheOffposition.
2.Thefuelshutoffvalveisnotcompletely open.
2.Openthefuelshutoffvalve.
3.Thefueltankisnearlyemptyor containsstalefuel.
3.Drainandllthefueltankwithfresh gasoline(notmorethan30daysold). Iftheproblempersists,contactan AuthorizedServiceDealer.
4.Thesparkplugwireisloose.
4.Connectthewiretothesparkplug.
5.Thesparkplugispitted,fouled,orthe gapisincorrect.
5.Checkthesparkplugandadjustthe gapifnecessary .Replacethespark plugifitispitted,fouled,orcracked.
Enginerunsrough
6.Theengineoillevelintheengine crankcaseistoolowortoohigh.
6.Addordrainoiltoadjusttheoillevelin theenginecrankcasetotheFullmark onthedipstick.
26
Page 27
Problem
PossibleCauseCorrectiveAction
1.ThethrottleisnotintheFastposition whenthrowingsnow .
1.MovethethrottletotheFastposition.
2.Themachineismovingtoofasttoclear thesnow.
2.Shiftthemachineintoalowergear.
3.Y ouaretryingtoremovetoomuch snowperswath.
3.Reducetheamountofsnowremoved perswath.
4.Y ouaretryingtoremoveextremely heavyorwetsnow.
4.Don'toverloadthemachinewith extremelyheavyorwetsnow.
5.Thedischargechuteisplugged.5.Unclogthedischargechute.
6.Theauger/impellerdrivebeltisloose orisoffthepulley .
6.Installand/oradjusttheauger/impeller drivebelt;refertowww.Toro.com forservicinginformationortakethe machinetoanAuthorizedService Dealer.
Engineruns,butthemachinedischarges snowpoorlyornotatall
7.Theauger/impellerdrivebeltisworn orbroken.
7.Replacetheauger/impellerdrivebelt; refertowww.Toro.comforservicing informationortakethemachinetoan AuthorizedServiceDealer.
Dischargechuteeitherdoesnotlockinto placeordoesnotmove
1.Thedischargechutelatchisnot properlyadjusted.
1.Adjustthedischargechutelatch.
1.Theskidsand/orscraperarenot properlyadjusted.
1.Adjusttheskidsand/orthescraper .
Themachinedoesnotproperlyclearthe snowoffthesurface
2.Thepressureinthetiresisnotequal.
2.Checkandadjustthepressureinone orbothtires.
27
Page 28
Notes:
28
Page 29
Notes:
29
Page 30
Notes:
30
Page 31
InternationalDistributorList
Distributor:
Country:
PhoneNumber:Distributor:
Country:
PhoneNumber:
AtlantisSuveSulamaSisstemleriLt
Turkey902163448674
MaquiverS.A.Colombia
5712364079
BalamaPrimaEngineeringEquip.HongKong85221552163
MaruyamaMfg.Co.Inc.
Japan81332522285
B-RayCorporation
Korea82325512076
AgrolancKft
Hungary3627539640
CascoSalesCompany
PuertoRico7877888383
Mountelda.s.CzechRepublic
420255704220
CeresS.A.CostaRica
5062391138
MunditolS.A.
Argentina541148219999
CSSCTurfEquipment(pvt)Ltd.SriLanka
94112746100
OslingerTurfEquipmentSA
Ecuador59342396970
CyrilJohnston&Co.
NorthernIreland442890813121
OyHakoGroundandGardenAb
Finland35898700733 EquiverMexico525553995444ParklandProductsLtd.NewZealand6433493760 FemcoS.A.Guatemala
5024423277
PratoV erdeS.p.A.
Italy390499128128 G.Y .K.CompanyLtd.
Japan81726325861
Prochaska&Cie
Austria4312785100 GeomechanikiofAthensGreece
30109350054
RTCohen2004Ltd.
Israel97298617979 GuandongGoldenStarChina
862087651338Riversa
Spain
34952837500
HakoGroundandGardenSweden
4635100000
ScSvendCarlsenA/S
Denmark4566109200 HakoGroundandGarden
Norway4722907760
SolvertS.A.S.
France33130817700 HayterLimited(U.K.)
UnitedKingdom441279723444
SpyprosStavrinidesLimitedCyprus
35722434131
HydroturfInt.CoDubai
UnitedArabEmirates97143479479
SurgeSystemsIndiaLimited
India911292299901 HydroturfEgyptLLC
Egypt2025194308T-MarktLogisticsLtd.Hungary3626525500 IrriamcPortugal351212388260ToroAustraliaAustralia61395807355 IrrigationProductsInt'lPvtLtd.India862283960789ToroEuropeNVBelgium3214562960 JeanHeybroekb.v .Netherlands31306394611
EuropeanPrivacyNotice
TheInformationT oroCollects ToroWarrantyCompany(T oro)respectsyourprivacy .Inordertoprocessyourwarrantyclaimandcontactyouintheeventofaproductrecall,weaskyou tosharecertainpersonalinformationwithus,eitherdirectlyorthroughyourlocalTorocompanyordealer.
TheTorowarrantysystemishostedonserverslocatedwithintheUnitedStateswhereprivacylawmaynotprovidethesameprotectionasapplies inyourcountry.
BYSHARINGYOURPERSONALINFORMATIONWITHUS,YOUARECONSENTINGTOTHEPROCESSINGOFYOURPERSONALINFORMA TION ASDESCRIBEDINTHISPRIV ACYNOTICE.
TheW ayToroUsesInformation Toromayuseyourpersonalinformationtoprocesswarrantyclaims,tocontactyouintheeventofaproductrecallandforanyotherpurposewhichwetell youabout.T oromayshareyourinformationwithT oro'safliates,dealersorotherbusinesspartnersinconnectionwithanyoftheseactivities.Wewillnot sellyourpersonalinformationtoanyothercompany.Wereservetherighttodisclosepersonalinformationinordertocomplywithapplicablelawsand withrequestsbytheappropriateauthorities,tooperateoursystemsproperlyorforourownprotectionorthatofotherusers.
RetentionofyourPersonalInformation Wewillkeepyourpersonalinformationaslongasweneeditforthepurposesforwhichitwasoriginallycollectedorforotherlegitimatepurposes (suchasregulatorycompliance),orasrequiredbyapplicablelaw .
Toro'sCommitmenttoSecurityofY ourPersonalInformation Wetakereasonableprecautionsinordertoprotectthesecurityofyourpersonalinformation.Wealsotakestepstomaintaintheaccuracyandcurrent statusofpersonalinformation.
AccessandCorrectionofyourPersonalInformation Ifyouwouldliketorevieworcorrectyourpersonalinformation,pleasecontactusbyemailatlegal@toro.com.
AustralianConsumerLaw
AustraliancustomerswillnddetailsrelatingtotheAustralianConsumerLaweitherinsidetheboxoratyourlocalT oroDealer.
374-0269RevF
Page 32
TheToroWarranty
and
TheToroGTSStartingGuarantee
ConditionsandProductsCovered
TheT oroCompanyanditsafliate,ToroWarrantyCompany,pursuant toanagreementbetweenthem,jointlypromisetorepairfortheoriginal purchaser
1
theT oroProductlistedbelowifdefectiveinmaterialsor workmanshiporiftheT oroGTS(GuaranteedtoStart)enginewillnotstart ontherstorsecondpull,providedtheroutinemaintenancerequiredin theOperator'sManualhavebeenperformed.
Thefollowingtimeperiodsapplyfromthedateofpurchase:
ProductsWarrantyPeriod
WalkPowerMowers
•CastDeck
5yearsResidentialUse
2
90DaysCommercialUse
•Engine
5yearsGTSGuarantee, ResidentialUse
3
•Battery2years
•SteelDeck
2yearsResidentialUse
2
90DaysCommercialUse
•Engine
2yearsGTSGuarantee, ResidentialUse
3
TimeMasterMowers3yearsResidentialUse
2
90DaysCommercialUse
•Engine
3yearsGTSGuarantee, ResidentialUse
3
•Battery2years
ElectricHandHeldProducts2yearsResidentialUse
2
NoWarrantyforCommercialUse
Snowthrowers
•SingleStage
2yearsResidentialUse
2
45DaysCommercialUse
•Engine
2yearsGTSGuarantee, ResidentialUse
3
•TwoStage
3yearsResidentialUse
2
45DaysCommercialUse
•Chute,chutedeectorand impellerhousingcover
Lifetime(originalowneronly)
5
ElectricSnowthrowers
2yearsResidentialUse
2
NoWarrantyforCommercialUse
AllRide-OnUnitsBelow
•Engine
Seeenginemanufacturer'swarranty
4
•Battery2yearsResidentialUse
2
•Attachments2yearsResidentialUse
2
DHLawn&GardenTractors
2yearsResidentialUse
2
90DaysCommercialUse
XLSLawn&GardenTractors
3yearsResidentialUse
2
90DaysCommercialUse
TimeCutter
3yearsResidentialUse
2
90DaysCommercialUse
TITANMowers3yearsor240hours
5
•Frame
Lifetime(originalowneronly)
6
ZMasterMowers—2000Series
4yearsor500hours
5
•Frame
Lifetime(originalowneronly)
6
1
OriginalPurchasermeansthepersonwhooriginallypurchasedtheT oroProduct.
2
Residentialusemeansuseoftheproductonthesamelotasyourhome.Useatmorethanone
locationisconsideredcommercialuseandthecommercialusewarrantywouldapply .
3
TheT oroGTSStartingGuaranteedoesnotapplywhentheproductisusedcommercially .
4
SomeenginesusedonT oroProductsarewarrantedbytheenginemanufacturer.
5
Whicheveroccursrst.
6
LifetimeFrameWarranty-Ifthemainframe,consistingofthepartsweldedtogethertoformthe
tractorstructurethatothercomponentssuchastheenginearesecuredto,cracksorbreaksin
normaluse,itwillberepairedorreplaced,atT oro'soption,underwarrantyatnocostforparts
andlabor .Framefailureduetomisuseorabuseandfailureorrepairrequiredduetorustor
corrosionarenotcovered.
Thiswarrantycoversthecostofpartsandlabor ,butyoumustpay transportationcosts.
Warrantymaybedeniedifthehourmeterisdisconnected,altered,or showssignsofbeingtamperedwith.
OwnerResponsibilities
YoumustmaintainyourT oroProductbyfollowingthemaintenance proceduresdescribedintheOperator'sManual.Suchroutine maintenance,whetherperformedbyadealerorbyyou,isatyourexpense.
InstructionsforObtainingWarrantyService
IfyouthinkthatyourT oroProductcontainsadefectinmaterialsor workmanship,followthisprocedure:
1.Contactyoursellertoarrangeserviceoftheproduct.Ifforany reasonitisimpossibleforyoutocontactyourseller ,youmaycontact anyT oroAuthorizedDistributortoarrangeservice.Seeattached DistributorList.
2.Bringtheproductandyourproofofpurchase(salesreceipt)to theservicingoutlet.Ifforanyreasonyouaredissatisedwiththe servicingoutlet’sanalysisorwiththeassistanceprovided,contact usat:
ToroCustomerCareDepartment,RLCDivision ToroWarrantyCompany 811 1LyndaleAvenueSouth Bloomington,MN55420-1196 001–952–948–4707
ItemsandConditionsNotCovered
Thisexpresswarrantydoesnotcoverthefollowing:
•Costofregularmaintenanceserviceorwearparts,suchasblades,
rotorblades(paddles),scraperblades,belts,fuel,lubricants,oil changes,sparkplugs,pneumatictires,cable/linkageorbrake adjustments
•Anyproductorpartwhichhasbeenalteredormisusedandrequires
replacementorrepairduetoaccidentsorlackofpropermaintenance
•Repairsnecessaryduetofailuretousefreshfuel(lessthanone
monthold),orfailuretoproperlypreparetheunitpriortoanyperiod ofnon-useoveronemonth
•Allrepairscoveredbythesewarrantiesmustbeperformedbyan
authorizedT oroservicingoutletusingapprovedreplacementparts.
GeneralConditions
Thepurchaseriscoveredbythenationallawsofeachcountry.Therights towhichthepurchaserisentitledwiththesupportoftheselawsarenot restrictedbythiswarranty.
374-0268RevE
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use