Toro Groundsmaster 360 Quad-Steer 2WD Sell Sheet

FEATURES

Groundsmaster® 360

Quad-Steer

2WD

• Quad-SteerTM True all-wheel steering

• Kubota® 24.8 hp, 3-cylinder, liquid-cooled diesel engine

• 72” width of cut in either side discharge, rear discharge, or Guardian® Recycler® configuration

• Mowing/transport speed range: 0-10 mph (0-16 km/h)

• Integrated direct-drive transmission with hydraulically actuated wet multi-disc PTO clutch

• Improved operator comfort with isolated seat platform

• EPA Tier 4 Final compliant

Seriously advancing the way you cut grass.

The Toro Groundsmaster 360 2WD models have been repowered with a

24.8 hp (18.5 kW) Kubota

Tier 4 Final regulations. This machine utilizes revolutionary Quad-Steer™

all wheel steering to maximize productivity. Climb hills without slipping.

3-cylinder diesel engine to comply with EPA

Make 180° turns without tearing

turf. Hug the turns or side hills while

mowing in total comfort. Save

time without sacrificing quality.

Intuitive controls and unparalleled

maneuverability turn work into play.

But this is no toy. It’s a performer

in every sense of the word. A higher

quality of cut, speed and efficiency,

lasting dependability. Surprisingly,

the world’s most exhilarating

mower is also the

most efficient. The

Groundsmaster 360

is the science and

the art of mowing, a

sensory experience you

simply have to feel for

yourself.

Call your Toro distributor at 1-800-803-8676

Groundsmaster® 360 2WD Specifications*

GROUNDSMASTER 360 – 2WD, TIER 4 DIESEL, MODELS 31228, 31229

ENGINE

FUEL CAPACITY

TRACTION DRIVE

TIRES

AIR CLEANER

GAUGES

CONTROLS

GROUND SPEED

RADIATOR

MAIN FRAME

BRAKES

STEERING

ELECTRICAL

INTERLOCKS

OPERATOR AREA

HYDRAULICS/COOLING

PTO CLUTCH

ROLL-OVER PROTECTION

SAFETY

CERTIFICATION

WARRANTY

HEIGHT ROPS UP

OVERALL LENGTH

OVERALL WIDTH

WHEELBASE

EST. SHIPPING WEIGHT

Kubota,® 3-cylinder, liquid-cooled diesel. Power: 24.8 hp (18.5 kW) gross, at rated speed of 3000 rpm. Torque peak: 71.5 (52.7) Nm (lbs-ft) @ 2200 rpm. Displacement: 1123cc. High idle: 3200 rpm no load (uninstalled) 3100-3200 installed. Remote-mounted 5" Donaldson

13.5 gallons (51.1 liters) diesel. Biodiesel Ready for use up to B-20 (20% biodiesel and 80% diesel blend).

Independent high-torque, low-speed wheel motors with 280 cc displacement. Dual pump hydrostatic drive system with optional differential lock.

Front & Rear: (All 4 tires and wheels are the same part number) 23/10.5x12 6 ply pneumatic tubeless, demountable and interchangeable. Tread Kenda K500 TL similar to “Toro Tuff Trac”.

Dry, replaceable primary element.

Hour meter, fuel gauge, indicator lights for glow plugs, high coolant temperature, battery charge, and low oil pressure. Automatic shutdown for high coolant temperature. Two wheel steer lockout indicator light on 4WD units.

Ignition switch, hand-throttle, foot-operated traction pedal with mowing speed control stop, service brake with parking brake latch, switch for raising and lowering cutting unit.

Transport and Mow: Forward 0-10 mph (0-16 km/h), variable. Reverse 0-8.5 mph (0-13.7 km/h), variable.

Rear mount, cross flow, 6.5 fins per 1” (25 mm), 8 quart (7.6 liter) capacity

Rectangular structured steel tube and high strength steel plate welded construction.

Service Brake: Foot pedal with dynamic braking through hydrostatic transmission. Parking Brake: foot actuated brake lever with two 8” (20.3 cm) diameter drum brakes mounted on the rear wheel motors.

Quad Steer™ all wheel steer with four wheel Ackermann steering. Two turns Lock to Lock controlled via steering wheel and automatic synchronizing hydraulic cylinders.

12-volt, 40 amp internal regulated alternator/generator charging @ 3150 rpm. Battery: BCI Group No. 34, 690 cold cranking amps @ 0° F (-17.78° C).

Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, engine stops. If operator leaves the seat with the unit out of neutral, engine stops. Engine stops if parking brake engaged and traction pedal not in neutral. High temp (PTO shuts down but engine remains running), Over temp (engine shuts down).

High back cushion vinyl seat with drain hole, deluxe low profile mechanical suspension, 4” (10 cm) fore-aft travel with an additional 44 mm (1.75”) foreword

SEAT

adjustment, armrests standard, retractable seat belt, lateral shock absorption.

Operator platform with isolated operator seat (all models). Storage area behind operator seat, 12-volt power outlet, cup holder.

3 gallon (11.4 liter) capacity, suction spin-on filter mounted to transmission, oil cooler 6.5” x 17”x 3.5” (16.5 cm x 43.2 cm x 8.9 cm). Bar and Plate Core; 6.5 serpentine fins per 1” (25 mm).

Hydraulically actuated wet multi disc clutch.

2 post Standard foldable ROPS certified per ISO/DIS 21299.2 specifications Cab ROPS certified

Complies with American National Standards Institute (ANSI B71.4-2004)

Certified to meet SAE J2258. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer. Certified to meet C-Tick 2004/108/EC/(EMC). Certified to meet the CE Machinery Directive.

Two year limited

DIMENSIONS & WEIGHT WITH CUTTING DECKS

78” (198 cm)

91.5” (232 cm)

78” (198 cm) [72” (183 cm) base deck] / 75” (191 cm) [72” (183 cm) side discharge deck] / 55” (140 cm) wheel to wheel

57” (145 cm)

2,522 lbs. (1145 kg)

air cleaner. Fuel filter/water separator. EPA Tier IV Final Compliant.

PART NUMBER

AIR RIDE GRAMMER SEAT

SPARK ARRESTOR KIT SPEED REDUCTION KIT ROTATING BEACON KIT

BIMINI CANVAS SHADE UNIVERSAL MOUNT SUNSHADE

DIFFERENTIAL LOCK

NORTH AMERICA ROAD

LIGHT KIT

SMV SIGN KIT

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

Air ride suspension and vinyl cushions. Model 30511.

Part No. 119-8018

Model 30547

Part No. 120-0256

Model 30358

Model 30349

Model 30508

Includes headlights, red/amber flashers, turn signals and one rear work light. Model 30513

Part No. 115-0014

GROUNDSMASTER 360 ATTACHMENTS AND ACCESSORIES

The Groundsmaster 360 is manufactured in Tomah, WI ISO 9002 Certified Plant.

+ 1 hidden pages