Page 1

Greensmaster 1000
The Greensmaster 1000 has earned a
legendary reputation in greens mowing
worldwide. It’s the mower of choice for
many prestigious golf courses for its
precision and accuracy.
Greensmaster® 1000
Accessories
The Greensmaster 1000 is equipped
with more than 25 attachments and
accessories to ensure you have the right
tools to match any turf conditions.
Greensmaster 1000 | 04052
• 3.7 HP (2.7 kW) engine
• Uniquely weighted, front to rear, for deeper
penetration into the turf’s surface for a lower,
more consistent height of cut, and straight
tracking
• Excellent for mowing flat greens
Standard Equipment
Narrow Wiehle Roller | 99-6241
• .200”(5.0 mm) groove spacing, aluminum roller
• Low penetration into turf
Bedknife & Bedbar Options
Greensmaster 1000
California CARB Compliant | 04034
• Adheres to CARB emissions standards
• Only sold in California
Tournament Bedknife | 93-4263
• Height of cut range 1/8” to 1/2” (3.2 – 12.7mm)
• Thick blade for longer lasting bedknife
©2009 The Toro Company
8111 Lyndale Ave. S.
Bloomington, MN 55420-1196
Printed in the U.S.A.
Specifications subject to change.
Please contact your Toro distributor for details.
Aggressive Bedbar | 112-9279-03
• Designed for firm greens for a more aggressive
cut is needed for more aggressive cultivars
• Recommended for use when reel diameter has
worn down to allow low heights of cut
• Not recommended for use in soft turf conditions
or periods of high stress
Reel Option
8-Blade Reel | 93-6087
•
Recommended for use on higher heights of cut,
such as tee boxes or aprons surrounding greens
Microcut Bedknife | 93-4262
• Height of cut range 5/64”– 3/16” (2.0mm – 4.8mm)
• Optimal for the lowest heights of cut
Low Cut Bedknife | 93-4264
• Height of cut range 3/16”- 1.0” (4.8 – 25.4mm)
• Thicker blade for longer lasting bedknife
EdgeMax™ Microcut Bedknife | 115-1880
• Tool steel bedknife for extended wear
• Height of cut range 5/64”– 3/16”(2.0mm – 4.8mm)
EdgeMax™ Tournament Bedknife | 115-1881
• Tool steel bedknife for extended wear
• Height of cut range 1/8” to 1/2” (3.2 – 12.7 mm)
Height of Cut Adjustment Bar | 94-9010
• Adjustment bar used to adjust cutting height
Page 2

Greensmaster® 1000 Accessories
Roller Options
Wide Wiehle Roller | 88-6790
• .430” (11mm) groove spacing, aluminum roller
• Deeper penetration into tur f
• Recommended for cutting tee boxes, aprons
surrounding greens, and higher heights of cut
Swaged Roller | 52-3590
• 2 ½” (6.3 cm) diameter, aluminum
• Offers slightly more penetration into turf than
the narrow Wiehle roller
• Center does not touch ground for less impact
on turf, while maintaining edge support
Grooming Options
Groomer | 04131
• Carbide-tipped groomer blades
• Controls grain growth and lifts grass blades
for a crisp, clean cut
Long Front Wiehle Roller | 93-9045
• 2 ½” (6.3 cm) diameter, 24” (61 cm) width,
• Improves edge support and prevents edge
marking of cutting unit
• Use in soft turf conditions
Cast Iron Wiehle Roller | 71-1550
• Heavier roller adds additional weight to cutting
unit for increased penetration into turf
Groomer Brush Assembly | 105-9640
• Spiral rotating brush used to condition grass
before cutting
N ote: Groomer brush may increase the amount o f clippi ngs
deposited into the basket whe n set to more agg ressive settings.
Full Roller | 104-2642
• Least stressful roller option
• Use in soft conditions or high stress periods to
prevent thinning of tur f
Front Roller Extension Kit | 65-8560
• Roller extension wheels that attach to the
outside of front roller shaft
• Use on soft turf or heavily undulated greens
to prevent edge marking of cutting unit
Thatching Kit (dynaBLADE) | 04109
• Vertically cuts into turf to reduce thatch and
control horizontal grass growth
• Only recommended when machine is set up
strictly for dethatching
Scraper Options
Smooth Scraper | 112-9285
• Scraper bar that clears roller of dirt, grass & debris
buildup
Wide Wiehle Roller Scraper | 112-9288
• Scraper bar that clears the wide Wiehle roller
of dirt, grass & debris buildup
Scraper Brush | 112-9286
• Conditions surface of turf before cutting, while
clearing the roller of dirt, grass & debris buildup
Narrow Wiehle Roller Scraper | 112-9289
• Scraper bar that clears the narrow Wiehle
roller of dirt, grass & debris buildup
Scraper Comb | 112-9287
• Conditions surface of turf before cutting, while
clearing the roller of dirt, grass & debris buildup
Page 3

Greensmaster® 1000 Accessories
Traction Unit Accessories
Light Kit | 04061
• Allows operator to mow in low light conditions
Operator Presence Bail Kit | 112-9282
• Safety feature that kills engine if operator
releases handle
• Required for CE Compliance
Traction Slow Down Kit | 115-1886
• Sixteen-tooth pulley used to reduce traction
speed and increase frequency of clip to achieve
higher quality of cut
• Gives smaller operators more control of machine
and improves ease of use
Push Broom Brush | 04119
• Conditions grass prior to cut
• Primarily used on Bermuda, Bent, or other
warm season grasses to stand and straighten
grass blades for a crisp, clean cut
Hour Meter Kit | 105-5350
• Records hours used on engine
• Standard on all F’09 models
Jet Main Kit #62 | 98-8735
• High-altitude engine application
• Use for heights between 3,000-6,000 ft
(914 - 1829m)
Jet Main Kit #60 | 98-8736
• High-altitude engine application
• Use for elevations above 6,000 ft (1829m)
Wheel Kit | 04123
• Used to transport mower
Clip Kit | 65-9000
• Alters clip frequency for an improved quality of
cut at higher cutting heights
• Use for tee boxes, aprons and higher heights
of cut
• Alternative option to purchasing an 8-blade
reel to reduce frequency of clip
Spark Arrestor Kit | 117-1441
• Prevents sparks from emitting from the engine
Additional Accessories & Older Models Available
Operator Presence Bail Kit | 105-5370
• Safety feature that kills engine if operator
releases handle
• Used for 2007 models and older
Light Kit | 110-3463
• Light kit for 2007 models and older
Turf Evaluator | 04399
• Mirror device used to assess the condition of
the turf