Toro Greensmaster 1000 Specifications

Greensmaster® 1000
Uniquely weighted, front to rear, the Greensmaster 1000 deeply penetrates the turf’s surface for a lower, more consistent height of cut, and straight tracking.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
44
ENGINE
FUEL CAPACITY
TRACTION AND IMPLEMENT DRIVE
REEL DRIVE
GROUND SPEED
DIFFERENTIAL
CLUTCHES
BRAKE
TRACTION DRUM
CONTROLS
HANDLE
TRANSPORT TIRES/KICKSTAND
REEL CONSTRUCTION
WIDTH OF CUT
HEIGHT OF CUT
CLIP
BEDKNIFE/BEDBAR
GRASS BASKET FRONT ROLLER
WEIGHT
CERTIFICATION
WARRANTY
Greensmaster® 1000 Series Specifications
*
GREENSMASTER 1000, MODEL 04055
Subaru® Heavy-Duty Industrial, 4.3 HP, OHC, 4-cycle, CARB, EPA, EU, China certified gasoline engine with integral lighting coil. Displacement: 7.7 cu in. (126 cc). Cast iron cylinder sleeve. Electronic ignition. Maximum noise suppression muffler.
3.17 quarts (3.0 liters) regular grade unleaded gasoline.
Engine to countershaft drive: two “A” section V-belts. Timing belts from countershaft to differential, drive drum and reel.
Positive drive belt powered reel. Manually activated jaw-type clutch provides drive engagement/disengagement.
Mowing speed: 1.5 mph (2.4 km/h) to 3.3 mph (5.3 km/h). Transport speed (maximum): 5.0 mph (8.0 km/h) with transport tires installed.
Peerless Series 100.
Traction: inside belt idler. Reel: jaw type.
Service/parking-band type.
Dual cast aluminum, 7.5" (19 cm) diameter.
Engine mounted; recoil starter, choke, fuel shut-off. Handle mounted: hour meter, on/off switch, throttle lever, traction engage lever, service/park brake lever, on/ off light switch (optional). Frame mounted: reel drive engage lever. Safety devices: neutral interlock system, servicing/park brake, enclosed drive system. Optional: Operator Presence Control.
Loop style; 1" (2.5 cm) diameter with easy pull pin height adjustment, operator selected.
Optional – Two quick detachable pneumatic tires, 3.00 x 3.25-6. 15 psi (1.03 bars) tire pressure. Lift assist kickstand is standard.
5" (12.7 cm) diameter, 11 high-carbon steel blades welded to 5 stamped steel spiders. Optional 8-blade & 14-blade reel.
21" (53.3 cm)
1/16" to 1.25" (1.58-31.75 mm)
Standard w/Clip Kit
Standard 11-Blade: .17" (4.3 mm) .25" (6.4 mm) Optional 8-Blade: .23" (5.8 mm) .34" (8.6 mm) Optional 14-Blade: .13" (3.3 mm) .194" (4.9 mm)
Dual screw “click” adjustment to reel. EdgeMaxTM Microcut Bedknife standard
Patented design: molded polyethylene, baffled and vented for high efficiency collection.
Aluminum Wiehle roller standard; 2" (5.1 cm) diameter, .200 spacing.
220 lbs. (99.8 kg) with aluminum Wiehle roller, kickstand and grass basket, without transport tires and groomer.
Designed in accordance to ANSI specifications B71.4-2012 and European Community (CE) specifications with required kits installed.
Two-year limited warranty. Refer to the Operator’s Manual for further details.
REEL OPTIONS
93-6087 8-Blade Reel
117-1449 14-Blade Reel
04109 Dethatching Reel
BEDKNIFE & BEDBAR OPTIONS
115-1880 EdgeMaxTM Microcut Bedknife (standard)
93-4262 Microcut Bedknife
108-4303 Extended Microcut Bedknife
115-1881 EdgeMax
93-4263 Tournament Bedknife
108-4302 Extended Tournament Bedknife
93-4264 Low Cut Bedknife
112-7475 EdgeMax Fairway Bedknife
63-8600 Fairway Bedknife
94-6392 High Cut Bedknife
112-9279-03 Bedbar – Aggressive
* Specifications and design subject to change without notice. Products depicted in
this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. Consult your local Toro Distributor.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
TM
Tournament Bedknife
GREENSMASTER 1000 ACCESSORIES
ROLLER OPTIONS
88-6790 Wide Wiehle Roller
52-3590 Swaged Roller
93-9045 Long Front Wiehle Roller
71-1550 Cast Iron Wiehle Roller
104-2642 Full Roller
65-8560 Front Roller Extension Kit
SCRAPER OPTIONS
112-9285 Smooth Scraper
112-9288 Wide Wiehle Roller Scraper
112-9286 Scraper Brush
112-9289 Narrow Wiehle Roller Scraper
112-9287 Scraper Comb
TOOLS
04399 Turf Evaluator
125-5610
125-5611
94-9010
Paper – Reel
Shim – Reel
Height of Cut Bar Assembly
45
GROOMING OPTIONS
04134 Reverse Groomer Drive
125-3451 Forward Rotating Kit
04270 Greens Perfection Brush – Soft
04271 Greens Perfection Brush – Stiff
04283 Spring Steel Grooming Reel
04284 Carbide Grooming Reel
04285 Spiral Brush Grooming Reel
04741 Thin Blade Grooming Reel
TRACTION UNIT ACCESSORIES
112-9282 Operator Presence Bail Kit (ANSI/CE req.)
04266 Push Broom Brush
04123 Wheel Kit
115-1886 Traction Slow Down Kit
65-9000 Clip Kit
115-4754 Wireless Hour Meter
120-9690 Wire Harness (For Wireless Hour Meter)
117-0073 High Altitude Kit
The Greensmaster 1000 is manufactured in Tomah, WI ISO 9002 Certified Plant.