Toro 99-8925 Installation Instructions
Hitch Kit
FORM NO. 3322-744
Part No. 99–8925
Loose
Note: Use the chart below to identify parts for assembly.
DESCRIPTION QTY. USE
Hitch
Bolt
Locknut
Washer
Installing
1. Disengage the power take off (PTO), set the
Parts
1
4
Install Hitch
4
4
Hitch
parking brake, and turn the ignition key to
“OFF” to stop the engine. Remove the key.
INSTALLATION
INSTRUCTIONS
4
1
2. Install hitch to the rear of machine. Align holes
and tighten locknuts, washers and bolts. Torque
to 200 in–lbs (22.6 N–m) (Fig 1).
POTENTIAL HAZARD
• Components around engine will be hot if
the machine has been running.
WHAT CAN HAPPEN
• Touching hot components can cause burns.
HOW TO AV
OID THE HAZARD
• Allow the machine to cool before
performing maintenance.
• Do not touch engine components when hot.
The T
oro Company – 1999
Printed in USA
All Rights Reserved
3
1. Hitch
2. Bolt
3. Locknut
5
Figure 1
4. Machine
5. Washers
2
Frame
Loading...