Toro 93-9470 Installation Instructions
FORM NO. 3317–499
CE UPDATE KIT
52" ProLine Mowers - Model No. 30152 and 30753
PART NO. 93–9470
Loose Parts
Note: Use the chart below to identify parts used for assembly.
DESCRIPTION QTY. USE
Baffle
Carriage bolt 5/16–18 x 3/4” (19mm)
Lock nut 5/16” thin
Retainer
Bolt 1/4–20 x 1-1/4” (32mm)
Lock nut 1/4”
Bolt 3/8–16 x 3/4” (19mm)
Washer 3/8”
Decal package 1 Install over existing decals
1
5
5
3
3
3
2
2
Install front deflector
Install latch retainer (for PL 120 Mower
Model 30152 0nly)
Secure cover (for Mid-Size Mower
Model 30753 Only)
INSTALLATION
INSTRUCTIONS
Install Front Baffle
1. Locate baffle inside front of mower, so left end
fits into curved edge and bottom edge is 19 mm
(3/4”) below front lip of deck. Using baffle as a
guide, mark and drill (5) 9 mm holes in front of
mower as shown (Fig. 1).
2. Install front baffle inside mower with 5/16 bolts,
from the inside and secure with 5/16 thin lock
nuts (Fig. 1).
4
5
1. 52” mower
2. Front baffle
3. Drill 8 mm hole
1
2
3
Figure 1
4. Carriage bolt 5/16–18 x
3/4” (19mm)
5. Lock nut 5/16’ thin
2048
1
Installation
Install Deck Latch Retainers
(for Mower Model 30152 only)
1. Unhook latches securing right and left belt
covers to top of deck. (Fig. 2).
2. Remove (2) screws and nuts securing deck latch
to cover (Fig. 2). Only one latch per cover must
to be removed..
3. Insert a retainer between latch and cover as
shown (Fig. 2).
4. Install retainer and latch to cover with screws
and nuts previously removed.
5. Install cover and secure latch.
6. Install a 1/4 x 32 mm bolt thru ears of retainer
and secure with 1/4 locknut to lock latch
(Fig. 2).
Secure Belt Cover
(for Mower Model 30753 only)
1. Secure center and left belt covers to mower with
washer and 3/8 x 19 mm bolt (Fig. 3).
3
4
1
1. Center belt cover
2. Left belt cover
Figure 3
3. Bolt 3/8–16 x 3/4” (19 mm)
4. Washer
2
2050
2
1. Belt cover
2. Bolt 1/4–20 x 1–1/4”
(32 mm)
3
1
2049
Figure 2
3. Lock nut 1/4”
2
Loading...