Toro 78498 Installation Instructions
Form No. 3329–135
52 inch Twin Bagger
200 Series Z Master
Model No. 78498—Serial No. 230000001 and Up
Installation Instructions
The following is a list of parts shipped for the bagger. Refer to the finishing kit for the installation instructions and the
Operator’s Manual.
Loose Parts
Note: Use the chart below to verify all parts have been shipped.
Bagger mounting bracket
Left side bagger bracket
Right side bagger bracket
Bolt, 3/8 x 1 inch
Flange nut, 3/8 inch
Belleville washer, 3/8 inch
Blower assembly 1 Installing the blower assembly
Blower belt cover
Idler spring
Hood assembly
Bag
Clevis pin
Hairpin cotter
Bagger tube
Clamp
Knob
Blower Adapter
Caster weight
U–bolt
Nut, 1/2 inch
Lock washer, 1/2 inch
Plate
1
1
1
10
10
8
1
1
1
2
2
2
1
1
2
1
2
2
4
4
2
Installing the bagger brackets
Installing the bagger belt and idler spring
Installing the hood assembly and bags
Installing the bagger tube
Installing the weights
2003 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
All Rights Reserved
Printed in the USA
1
Loading...