Toro 74301, 74330, 74350, 74351 Addendum

Form No. 3352-131

Setup Addendum/Addendum d’organisation

TimeCutter) Z

Setup Addendum/Addendum d’organisation

m–7720

Figure 1

m–7721

Figure 2

English

Route the battery cable from the positive battery post to the solenoid. Ensure the cable is routed above the crossbar and between the seat supports as shown in Figure 1.

Important Connect the cable to the positive post so that it extends parrallel with the top of the battery, as shown in

Figure 2, and verify that it does not come in contact with the seat pan.

Francais

Acheminez le câble de batterie de la borne positive au solénoïde. Assurez–vous que le câble passe au–dessus de la traverse et entre les supports du siège, comme illustré à la Figure 1.

Important Connectez le câble à la borne positive de manière qu’il soit parallèle au haut de la batterie, comme illustré à la

Figure 2. Assurez–vous qu’il ne touche pas le plateau du siège.

W 2004 by The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420-1196

Original Instructions (EN)

Printed in the USA