690 Series
GOLF ROTORS
For nearly 40 years the 690 Series has set the standard for durability and
reliability in both golf and commercial applications. Extremely rugged, the
690 series is constructed of brass, stainless steel and engineering
plastics for unmatched performance in the most demanding environments.
Water Management Highlight
Two 2-speed models provide improved performance and lower the system cost for
larger radius applications. 696 models for single row applications and 698 models for
double row applications provide a slower speed in the non-overlap areas and a faster
speed in the overlap areas to provide a more balanced precipitation rate than
traditional full circle sprinklers in these application.
120° Fast Side
60° Slow Side
180° Fast Side
180°
Slow
Side
Features & Benets
696 2-SPEED MODELS
Used in single row applications these sprinklers operate at a slower speed over the 60
degree non-overlap area and a faster speed over the 120 degree overlapped areas to
provide a balanced application rate.
698 2-SPEED MODELS
Used in double row applications these sprinklers operate at a slower speed over the 180
degree non-overlap area and a faster speed over the 180 degree overlapped areas to
provide a balanced application rate.
FIXED ARC DRIVES
Nine fixed arc drive assemblies ensure positive retention of the coverage area with
no arc drift.
690
ARTIFICIAL PLAYING SURFACES
Radius and flow capabilities are perfect for cooling and rinsing artificial playing surfaces
such as football field.
ELECTRIC VALVE IN HEAD MODELS
Electric valve in head models provide individual head control that ensures run times can
match differing soil, turf and terrain watering requirements, pressure regulation to ensure
all nozzles perform at the same pressure and manual ON-OFF-Auto control at the head.
690 Series
Operating Specifications
• Inlet: 1 ½” NPT
• Radius: 87’ – 108’
• Flow Rate: 51.0 – 82.2 GPM
• Recommended Operating Pressure Range: 80-100 psi
Maximum pressure: 150 psi
Minimum pressure: 40 psi
• Electric Valve-In-Head Solenoid: 24V ac, 50/60 Hz
- Inrush: 60 Hz, 0.30 Amps
- Holding: 60 Hz, 0.20 Amps
• Check-O-Matic: Maintains 37’ of elevation
Dimensions
• Body diameter: 10”
• Body height: 16”
• Weight: 5.6 lbs.
• Pop-up height to nozzle: 3/4”
Additional Features
• Manual control at the sprinkler, On-Off-Auto (electric)
• Time-proven, gear-drive design
• All internal components serviceable from the top of
the sprinkler
• Durable engineering plastic and stainless steel construction
• Nine arc selections
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Toro® Swing Joints
S p e c i f y i n g I n f o r m a t i o n — 6 9 0
69X-0X-XXX
Pressure
Regulation*
8—80 psi
1—100 psi
*Electric models only.
690 Series Performance Chart
Base
Pressure
100 90 57.1 100 73.5 108 82.2
Nozzle Set90Nozzle Set91Nozzle Set
psi Radius GPM Radius GPM Radius GPM
80 87 51.0 96 61.2 100 74.0
Sprinkler radius of throw per ASAE standard S398.1.
Radius shown in feet.
Arc Valve-In-Head Type Nozzle
69X 0X XX X
92
1—90° A—150°
2—180° B—165°
4—Full-circle C—195°
6—Full-circle, 2-speed (60°–120°) D—210°
8—Full-circle, 2-speed (180°–180°)
Example: When specifying a 690 Series Sprinkler with a 180° arc, electric valve-in-head, #91 nozzle,
and pressure regulation at 80 psi, you would specify: 692-06-918
1—Normally Open Hydraulic
2—Check-O-Matic
6—Electric
90
91
92
www.toro.com • The Toro Company • Irrigation Division • 5825 Jasmine St. Riverside, CA 92504 • 877.345.TORO (8676)
P/N 09-5033-IG Specifications subject to change without notice. For more Information, contact your local Toro distributor. ©2009 The Toro Company. All rights reserved.