Page 1
800S Conversion Assemblies
•Lower cost
•Higher pop-up
•Easier to adjust arc
•Easier to service
Quickly upgrades existing Toro
sprinklers to the latest technology to
provide all the features of the 800S
Series sprinkler.
Specifications
• Radius: 26.5–32.9m (87'–108')
• Flow rate: 193–311 LPM (51.0–82.2 GPM)
• 40mm (1
1
⁄2") NPT female-threaded inlet
•9 arc selections:
• 90˚, 150˚, 165˚, 180˚, 195˚, 210˚, 360˚
fixed arcs
• 60˚/120˚ full-circle, two-speed
• 180˚/180˚ full-circle, two-speed (Two
speed models run half speed in non-overlap
areas to provide balanced water application)
• Rubber cover kit option: Part No. 690-01
• Dimensions:
• Height: 405mm (16")
690 Series
Sprinklers
SPRINKLERS
26.5–32.9m (87'–108') Radius
Features
•Two standard pressure-regulation
settings available to ensure
consistently accurate nozzle
performance, regarless
of elevation:
• 5.5 Bar and 6.9 Bar (80 psi and
100 psi) (electric)
• Three body styles/activation types
available to fit every application:
• Electric Valve-In-Head
• Normally Open Hydraulic
Valve-In-Head
• Check-O-Matic
• Manual control at the sprinkler,
On-Off-Auto (electric)
• Bowl-vented discharge
(atmospheric) minimizes the
differential pressure required for
regulation and ensures positive
valve closure (electric)
•Time-proven, gear-drive design
• All internal components
serviceable from the top of
the sprinkler
• Large selection of
nozzles available
• Durable engineering plastic and
stainless steel construction
For Example:
When specifying a 690 Series Sprinkler with a 180˚ arc, an electric valve-in-head, #91 nozzle and
pressure regulation at 5.5 Bar (80 psi), you would order:
Attention:
600 & 700
Users
69X 0X XX
Arc Valve Type Nozzle Pressure Regulation*
Ordering Information
1—Normally Open
Hydraulic
2—Check-O-Matic
6—Electric
8—5.5 Bar (80 psi)
1—6.9 Bar (100 psi)
90
91
92
X
692-06-918
*Electric models only.
Two-speed designs offer an economical alternative
in non-overlapping areas while providing balanced
water application.
1—90˚ A—150°
2—180˚ B—165°
4—Full-circle C—195°
6—Full-circle, D—210°
2-speed (60˚-120˚)
8—Full-circle, 2-speed (180˚-180˚)
690 Series Performance Chart—Metric
Base Nozzle Set Nozzle Set Nozzle Set
Pressure 90 91 92
Bar kPa Kg/cm2Rad. LPM Rad. LPM Rad. LPM
5,5 550 5,61 26,5 193 29,3 232 30,5 280
6,9 690 7,04 27,4 216 30,5 278 32,9 311
Radius shown in meters. Sprinkler radius of throw per ASAE standard S398.1
690 Series Performance Chart—U.S.
Base Nozzle Set Nozzle Set Nozzle Set
Pressure 90 91 92
psi Rad. GPM Rad. GPM Rad. GPM
80 87 51.0 96 61.2 100 74.0
100 90 57.1 100 73.5 108 82.2
Radius shown in feet. Sprinkler radius of throw per ASAE standard S398.1
120°
Regular
Speed
60°
60°
Slow
Slow
Speed
Speed
120°
Regular
Speed
180°
Regular
Speed
180°
Half
Speed
Page 2
Worldwide Headquarters
The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Phone: 952-888-8801 Fax: 952-887-7265
www.toro.com
GB
Form Number: 200-xxxx
©2005 The Toro Company – All Rights Reserved.
Note: Decoder solenoids are not available on all model
configurations. Please consult the current price list or your
local Toro Manager for availability. Note: Products may not
be available in all regions. Please consult your Toro regional
manager for availability.
Radius shown in meters. ■Shaded areas represent nozzles not recommended at this pressure.
Sprinkler radius of throw per ASAE standard S398.1
670 Series Performance Chart—Metric
Base Nozzle Set Nozzle Set Nozzle Set Nozzle Set Nozzle Set
Pressure 70 71 72 73 74
Bar kPa Kg/cm2Rad. LPM Rad. LPM Rad. LPM Rad. LPM Rad. LPM
4,5 450 4,59 23,8 140 24,4 156 25,3 175 25,6 193 26,2 218
5,5 550 5,61 25,6 156 26,2 173 27,1 193 28,0 209 28,7 226
6,5 650 6,63 26,5 170 27,0 188 28,6 210 29,5 231 30,4 245
670 Series Performance Chart—U.S.
Base Nozzle Set Nozzle Set Nozzle Set Nozzle Set Nozzle Set
Pressure 70 71 72 73 74
psi Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM
65 78 36.9 80 41.1 83 46.3 84 51.0 86 57.5
80 84 41.2 86 45.6 89 51.0 92 55.3 94 59.6
100 88 46.2 90 51.2 95 57.3 98 62.8 102 66.8
Radius shown in feet. ■Shaded areas represent nozzles not recommended at this pressure.
Sprinkler radius of throw per ASAE standard S398.1
For Example:
When specifying a 670 Series Sprinkler with a full-circle, NPT threads, #72 nozzle,
an electric valve and pressure regulation at 5.5 Bar (80 psi), you would order:
Body Pressure
Arc Thread Valve Type Nozzle Regulation*
674
Ordering Information
70
71
72
73
74
1—Normally Open Hydraulic
2—Check-O-Matic
6—Electric
0—NPT
5—BSP
6—4.5 Bar (65 psi)
8—5.5 Bar (80 psi)
1—6.9 Bar (100 psi)
674-06-728
X X XXX
674—
Fullcircle
*Electric models only.
Model 674
23.8–31m (78'–102') Radius
Features
• Three standard pressure
regulation settings available
to ensure consistently accurate
nozzle performance:
• 4.5, 5.5 and 6.9 Bar (65, 80
and 100 psi) (electric)
• Three body styles/activation types
available to fit every application:
• Electric Valve-In-Head
• Normally Open Hydraulic
Valve-In-Head
• Check-O-Matic
• Manual control at the sprinkler,
On-Off-Auto (electric)
•Time-proven, planetary
gear-drive design
• All internal components
serviceable from the top of
the sprinkler
• Large selection of nozzles available
Specifications
• Radius: 23.8–31m (78'–102')
• Flow rate: 140–253 LPM
(36.9–66.8 GPM)
• 40mm (1
1
⁄2") NPT female-
threaded inlet, BSP
threads available
• Full-circle
• Rubber cover kit option:
Part No. 670-00 (flat flange),
Part No. 670-01 (round flange)
• Dimensions:
• Height: 280mm (11")
670 Series
Sprinklers
SPRINKLERS
360°
Loading...