Toro 6500-D, 6700-D User Manual

Reelmaster® 6500-D & 6700-D

These first true mid size fairway mowers offer power, durability, a consistently superb quality of cut

and up to 10 acres per hour productivity.

2014 Toro Commercial Equipment Guide 14-003-T Rev. 1/14

Reelmaster® 6500-D & 6700-D Specifications*

ENGINE

RADIATOR

ELECTRICAL

FEATURES

FUEL SYSTEM

CONTROLS

GAUGES

DIAGNOSTICS

TRACTION DRIVE

GROUND SPEED

TIRES/WHEELS/

PRESSURE

MAIN FRAME

BRAKES

STEERING

SEAT

ROPS

OVERALL

DIMENSIONS

NET WEIGHT WET

SOUND LEVEL

WARRANTY

CERTIFICATION

REELMASTER 6500-D

MODEL 03806, 2WD OR MODEL 03807, 4WD

Kubota® V1505-T liquid-cooled diesel engine. 4-cylinder, over-head valve. 1.5 liter displacement. Turbo-charged. 44.2 hp (33 kW) gross rated, 42 hp (31.3 kW) net at 3000 rpm. 40 amp alternator. Donaldson two-stage air cleaner with safety filter and restriction indicator.

Rear mounted, cross-flow 6.3 fins per inch. Cooling system capacity is 10 quarts (9.5 liters). Air to oil cooler with 2 rows, 6 fins per inch, mounted in front of radiator tips outward for cleaning. Removable oil cooler/radiator screen.

12-volt, 650 cold cranking amperes at 0°F (-18°C), 105 minute reserve capacity at 80°F (27°C), maintenance free battery. 1.4 kW electric starter. 40 amp alternator with I.C. regulator/rectifier. Automotive type electrical system. Seat switch, reel and traction interlock switches.

Bosch® in-line fuel injection pump with energized-to-run (ETR) fuel flow solenoid. Replaceable spin-on fuel filter/water separator. Fuel capacity: 15 gallons (57 liters). 2008 models Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend).

Foot operated traction and brake pedals. Hand operated throttle, traction speed limiter, parking brake latch, ignition switch, single joystick control for cutting unit on/off and lift/lower. Reel speed and backup controls located under the hood.

Hour meter, speedometer, fuel gauge, engine coolant gauge, and warning light cluster: engine oil pressure, high engine temperature, charge indicator, glow plug. Reel control lamp that lights to indicate glow time, controller fault, and high mow speed warning.

The Automatic Control Electronics, ACE™ system allows precision timing and control of machine functions for maximum reliability. Optional diagnostic display connects to an electronic control unit to pinpoint any electrical problems quickly and easily. Available DATA LOG™ system allows mechanic to find intermittent problems. Diagnostic test ports are provided for front and rear cutting unit drive, cutting unit lift, steering, and hydrostatic transmission charge pressure.

Power to the front drive wheel is via servo-controlled hydrostatic pump operating individual fixed displacement axial piston wheel motors that operate a planetary gear final drive assembly. Foot pedal control of forward/reverse ground speed.Toro 4-Matic via overrunning clutch for full time on-demand 4WD. A Roll Over Protection Structure (ROPS) and seat belt are standard on 4WD models.

0-10 mph (0-16.1 km/hr) forward; 0-4 mph (0-6.4 km/hr) reverse.

Two rear steering tires: 20 x 10-10, tubeless, 6-ply rating. Two front traction drive tires: 29 x 14-15, tubeless, 6-ply rating. Recommended tire pressure: 10-15 psi (59-103 kPa).

All welded steel frame includes tie-down loops.

Wet triple disc brakes on front planetary assemblies may be actuated individually for service brakes or locked together for transport or parking brakes. Dynamic braking through hydrostatic traction drive.

Power steering with dedicated power source.

Deluxe seat with adjustable suspension and fore-aft location. Optional Armrest Kit, Model 30707.

A 2-post ROPS with seat belt and optional canopy; standard on Models 03807 and 03808, optional on Model 03806.

Height Length Transport Width Operational Width Wheel Tread Wheelbase Models 03806/03807: 60" (152 cm) w/o ROPS 120" (305 cm) 84" (213 cm) 110" (279 cm) 72.25" (178 cm) - front 58" (147 cm)

84" (213 cm) w/ ROPS 41" (104 cm) - rear Model 03808: 84" (213 cm) w/ ROPS 120" (305 cm) 84" (213 cm) 147" (374 cm) 72.25 (178 cm) - front 58" (147 cm) 41" (104 cm) - rear

Model 03806: 3,100 lbs. (1,407 kg) with 5-blade cutting units and full fluid levels. Model 03807: 3,200 lbs. (1,453 kg) with 5-blade cutting units and full fluid levels. Model 03808: 3,850 lbs. (1,748 kg) with 5-blade cutting units and full fluid levels.

82 dB(A) under normal operating conditions.

Two-year limited warranty. Refer to the Operator’s Manual for further details.

The Reelmaster 6000 series complies with American National Standards Institute (ANSI B71.4-2004) and European Community (CE) specifications with required weight kits and ballast installed.

4WD System only: couples rear drive axle to hydrostatic transmission

REELMASTER 6700-D

MODEL 03808, 4WD

HYDRAULIC SYSTEM

PUMP

CONTROL BLOCKS

REEL SPEED CONTROL

LIFT CYLINDERS

HYDRAULIC OIL RESERVOIR

HYDRAULIC OIL

FILTER

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

2014 Toro Commercial Equipment Guide 14-003-T Rev. 1/14

A three section gear pump provides hydraulic flow to power the cutting units, power steering and cutting unit lift.

All hydraulic functions are controlled by two integrated hydraulic control blocks utilizing cartridge type relief valves, solenoid controlled proportional valves and solenoid operated directional control valves.

Reel drive circuit is split into front and rear independent circuits. Each circuit has a manually adjustable control for reel speed and backlap adjustment.

All lift and lower sequences are controlled by the ECU.

100% of oil from reservoir passes through a 100 mesh suction strainer before entering the reel drive circuit. 8.5 gallon (32 liter) capacity.

11 gram capacity at 10 gallon (37 liter) per minute flow Average Beta = 20 at 3 micron. Filter head has integral 50 psi (3.4 bars) bypass and a true differential pressure service indicator.

The Reelmaster 6500-D & 6700-D are manufactured in Tomah, WI ISO 9002 Certified Plant.

+ 1 hidden pages