Toro 590GF Series Product Literature

590GF SERIES
SPRAYS
Toro’s 590GF Series is the first spray head designed specifically for golf course irrigation with enhanced water management capabilities. The 590GF is built for the tough golf course environment, including harsh debris situations like top-dressing and sand, high water pressures, and daily mower and foot traffic. The 590GF is perfect around bunkers, on small tee boxes, and around the clubhouse. And with its patented X-Flow technology, the 590GF has a built-in shutoff device should a nozzle be damaged or removed and it’s standard check valve feature minimizes low head drainage.
Features & Benefits
In additional to the full line of Toro MPR, T-VAN and specialty nozzles the 590GF accepts the revolutionary Precision™ Spray and Precision™ Rotating Series nozzles with optimized distribution uniformity that provides exceptional turf conditions with minimal water usage.
Designed Flush Rate
Sprinkler flushes during pop-up and retraction clearing debris from around the riser to eliminate stick-ups and ensure positive sealing and retraction.
X-Flow® Shut Off Device
The X-Flow shut off feature stops the flow of water if the nozzle is damaged or removed to eliminate flooding, water waste and soil erosion.
Prevent Low Head Drainage
The standard check valve prevents low head drainage with up to 10’ of elevation change minimizing soil
erosion and water waste.
590GF-4
590GF-6
Flanged Cap
Flanged cap installs below grade to stabilize the body position and maintain optimum nozzle performance.
590GF-12
Without X-Flow
®
Water waste, soil erosion and flooding occur
590GF SERIES ROTORS
Operating Specifications
• Radius: 2’ – 26’
• Recommended pressure range: 25-50 psi (maximum – 75 psi)
• Flow rate: 0.05 – 4.71 GPM
• 2 GPM flush rate
Additional Features
• Stainless steel retraction spring
• All bodies shipped with flush plug in place
• Ratcheting riser feature for arc adjustment
Dimensions
• Body diameter:
- 1 3/8” on 4P and 6P
- 1 5/8” on 12P
• Cap diameter: 2”
• Inlet: ½” female-threaded
Warranty
• Three years
Risers and Extenders
570-6X
• Male-inlet threads install onto any 590GF sprinkler or to provide a 6" extension
• Maximum pressure: 75 psi
570-SR-6 and 570SR-18 Risers
With X-Flow
Eliminates water waste, soil erosion and flooding
1
2" male-threaded inlet for installation on
pipe fittings
• Maximum pressure: 75 psi
• Height: 6" and 18"
Specifying Information
Model Number Description
590GF-4 4” Pop-Up 590GF-4E 4” Pop-Up, Effluent 590GF-6 6” Pop-Up 590GF-6E 6” Pop-Up, Effluent 590GF-12 12” Pop-Up 590GF-12E 12” Pop-Up, Effluent
www.toro.com / e Toro Company, Irrigation Division / 5825 Jasmine Street, Riverside, CA 92504 / 877-345-8676 / Specications subject to change without notice / © 2015. All rights reser ved / P/N 15-5019-IG
Loading...