Toro 51465, 51466 Parts Catalogue

10in, 25cm Cordless

Trimmer

Ordering Replacement Parts

For example, a wheel assembly might be identified by

Model No. 51465 - 230000001 and up. Model No. 51466 - 230000001 and up.

Form Number 3350-554

Parts Catalog

To order replacement parts, please supply: the part number, the quantity, and the description of each part desired.

Understanding Reference Numbers

Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part. This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration.

Service Assembly Reference Numbers

Parts in service assemblies have reference numbers in the form a:b. The a represents the reference number of the entire service assembly and the b represents a sequential number unique to each part within the service assembly.

reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6: 3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1, 6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustrations and in part lists.

Reference Numbers Indicating Quantity

In an illustration, if a reference number indicates more than one part, the reference number has the form nX y. The n represents the quantity of the part, the X is the multiplication symbol, and the y represents the reference number. For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.

2003©The Toro Company -

Part Description Abbreviations

Part descriptions in this catalog may include the following abbreviations.

AR. . . . . . . . . . . . . . . as required

ASM. . . . . . . . . . . . . . assembly

CARR. . . . . . . . . . . . carriage

DEG. . . . . . . . . . . . . . degrees

FH. . . . . . . . . . . . . . . flat head

GA. . . . . . . . . . . . . . . gauge

HF. . . . . . . . . . . . . . . hex flange

HH. . . . . . . . . . . . . . . hex head

HHF. . . . . . . . . . . . . . hex head flange

HHFTF. . . . . . . . . . . . hex head flange thread forming

HJ. . . . . . . . . . . . . . . hex jam

HLH. . . . . . . . . . . . . . hex lag head

HOC. . . . . . . . . . . . . . height-of-cut

HS. . . . . . . . . . . . . . . hex

HSBH. . . . . . . . . . . . . hex socket button head

HSFH. . . . . . . . . . . . . hex socket flat head

HSH. . . . . . . . . . . . . . hex socket head

HWH. . . . . . . . . . . . . hex washer head

HWHTF. . . . . . . . . . . hex washer head thread forming

Footnotes

Not illustrated

Contents

Description Page

. . . . . . 3Handle and Spool Assembly

HYD. . . . . . . . . . . . . . hydraulic

INC. . . . . . . . . . . . . . . incorporated

LH. . . . . . . . . . . . . . . left hand

NI. . . . . . . . . . . . . . . . nylon insert

PPH. . . . . . . . . . . . . . phillips pan head

PTH. . . . . . . . . . . . . . phillips truss head

PTO. . . . . . . . . . . . . . power take off

RH. . . . . . . . . . . . . . . right hand

SFH. . . . . . . . . . . . . . slotted fillister head

SHH. . . . . . . . . . . . . . slotted hex head

SHWH. . . . . . . . . . . . slotted hex washer head

SPH. . . . . . . . . . . . . . slotted pan head

SQH. . . . . . . . . . . . . . square head

SRH. . . . . . . . . . . . . . slotted round head

STD. . . . . . . . . . . . . . standard

TAP. . . . . . . . . . . . . . self tapping

TTH. . . . . . . . . . . . . . torx truss head

WH. . . . . . . . . . . . . . .wing head

+ 2 hidden pages