Toro 51464 Parts Catalogue

8in Cordless Trimmer

Ordering Replacement Parts

Model No. 51464 - 240000001 and up.

Form Number 3350-839

Parts Catalog

To order replacement parts, please supply the part
number, the quantity, and the description of each
part desired.

Understanding Reference Numbers

Each Identified part in an illustration has a reference
number. The reference number for a part also
appears in the parts list, along with other information
about the part.

This catalog uses two special reference number
formats, one to indicate parts in a service assembly
and another to indicate the quantity of a given part in
an illustration.

Service Assembly Reference Numbers

Parts in service assemblies have reference numbers
in the form a:b. The a represents the reference
number of the entire service assembly and the b
represents a sequential number unique to each part
within the service assembly.

All Rights Reserved

For example, a wheel assembly might be identified
by reference number 6, the tire by 6:1, the valve by
6:2, and the wheel by 6:3. When you order the
assembly identified by reference number 6, you
receive all parts identified by reference numbers 6:1,
6:2, and 6:3. However, you may also order any part
individually. Reference numbers of this type appear
in illustrations and in part lists.

Reference Numbers Indicating Quantity

In an illustration, if a reference number indicates
more than one part, the reference number has the
form nX y. The n represents the quantity of the part,
the X is the multiplication symbol, and the y
represents the reference number.

For example, in an illustration, the reference number
2X 37 means that two of the parts identified by
reference number 37 are indicated.

2004©The Toro Company -

Description Page

Part Description Abbreviations

Part descriptions in this catalog may include the following abbreviations.

AR. . . . . . . . . . . . . . . as required

ASM. . . . . . . . . . . . . . assembly

CARR. . . . . . . . . . . . carriage

DEG. . . . . . . . . . . . . . degrees

FH. . . . . . . . . . . . . . . flat head

GA. . . . . . . . . . . . . . . gauge

HF. . . . . . . . . . . . . . . hex flange

HH. . . . . . . . . . . . . . . hex head

HHF. . . . . . . . . . . . . . hex head flange

HHFTF. . . . . . . . . . . . hex head flange thread forming

HJ. . . . . . . . . . . . . . . hex jam

HLH. . . . . . . . . . . . . . hex lag head

HOC. . . . . . . . . . . . . . height-of-cut

HS. . . . . . . . . . . . . . . hex

HSBH. . . . . . . . . . . . . hex socket button head

HSFH. . . . . . . . . . . . . hex socket flat head

HSH. . . . . . . . . . . . . . hex socket head

HWH. . . . . . . . . . . . . hex washer head

HWHTF. . . . . . . . . . . hex washer head thread forming

HYD. . . . . . . . . . . . . . hydraulic

INC. . . . . . . . . . . . . . . incorporated

LH. . . . . . . . . . . . . . . left hand

NI. . . . . . . . . . . . . . . . nylon insert

PPH. . . . . . . . . . . . . . phillips pan head

PTH. . . . . . . . . . . . . . phillips truss head

PTO. . . . . . . . . . . . . . power take off

RH. . . . . . . . . . . . . . . right hand

SFH. . . . . . . . . . . . . . slotted fillister head

SHH. . . . . . . . . . . . . . slotted hex head

SHWH. . . . . . . . . . . . slotted hex washer head

SPH. . . . . . . . . . . . . . slotted pan head

SQH. . . . . . . . . . . . . . square head

SRH. . . . . . . . . . . . . . slotted round head

STD. . . . . . . . . . . . . . standard

TAP. . . . . . . . . . . . . . self tapping

TTH. . . . . . . . . . . . . . torx truss head

WH. . . . . . . . . . . . . . .wing head

. . . . . . 3Trimmer Assembly

Footnotes

Œ

Not illustrated