Toro 44830, 44835 Specifications

Aerothatch 83 & Seeder 93

Provides relief from troublesome thatch and compaction and slit seeds all in one pass.

(Aerothatch 83 and Seeder 93 shown)

SWATH

SPACING

HITCH

DRIVE

GEARBOX

BLADES

BLADE SHAFT

BLADE DEPTH

FRAME

ROLLER

DIMENSIONS

SHIPPING WEIGHT

AEROTHATCH 83, MODELS 44830

48" (122 cm), 45" (114 cm) blade tip to blade tip.

Model 44830: 3" (7.6 cm)

Standard 3 point hitch, Category 1.

Std. 13/8" splined Ag. type drive shaft. PTO to
gearbox, sealed bearing and sprocket,
#H80 chain to blade shaft.

Heavy duty 1:1 right angle reversible gearbox.

(16) 12 ga./10 pt. (Optional: 7 ga. & 10 ga./10 pt.).

1.5" (38 mm) square high carbon steel.

0-3" (7.6 cm) in 1/4" (6.3 mm) increments.

All welded steel construction.

Full width, 3.5" (8.9 cm) dia. roller with sealed
bearings. Roller is integral with the skid shoes and
spring loaded wiper for full width of roller.

Height: 36" (91 cm) (with 3 pt. hitch). Length: 57"
(145 cm). Width: 60" (152 cm).

550 lbs. (250 kg)

DRIVE

SEED HOPPER

HOPPER AUGER

SEED SHUT OFF

SEED TUBES

FEED OPENINGS

DIMENSIONS

SHIPPING WEIGHT

OPTIONAL

SEEDER 93, MODEL 44835[1]

Ground powered.

100 lbs. (45.4 kg) capacity.

Metal cogs on a steel shaft.

Remote from the operator’s position.

Delivers seed to 16 discs.

Adjustable to the desired rate.

Height: 33" (84 cm). Length: 13" (33 cm)
Width: 56" (142 cm)

300 lbs. (136 kg)

Drag Mat, 72-002-0021.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in design, required attachments and safety features. Consult your local Toro Distributor.

[1] Must be used with 44830 Aerothatch.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

126