Toro 44539, 44538 Specifications
Pro ForceTM
The Pro Force™ is a self-contained engine-driven Debris Blower operated with a hand-held wireless RF controller. It utilizes
a high-efficiency turbine-type fan assembly designed to deliver greater air power to clear turf or pavement of leaves, grass
clippings, twigs, pine needles or other undesirable debris.
ENGINE
AIR FLOW
FAN DESIGN
CONTROL
NOZZLE
ROTOR DIAMETER
FAN ASSEMBLY DIAMETER
WEIGHT
LENGTH
WIDTH
HEIGHT
TOW-BEHIND TRAILER
TIRE SIZE:
FENDERS
WARRANTY
PRO FORCE DEBRIS BLOWER, MODEL 44538*
27 hp Kohler® Command Pro™ 725cc, gas, 2-cylinder, air-cooled, electronically-governed.
In 3rd party independent testing, per the ANSI/AMCA 210-07 standard for Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating, the Pro
Force test results demonstrated greater air flow volume, than any other single nozzle turbine-type debris blower currently on the market.
High efficiency, axial flow, turbine-type fan assembly.
Hand held wireless RF controller provides capability to start and stop the engine, adjust engine throttle up and down for high to low RPM range of operation, and
rotate nozzle 360 degrees in either direction. Ergonomic, weather resistant.
Single-piece impact-resistant plastic with 13” outlet diameter.
14”
14”
475 lbs.
Standard 97” from adjustable tow hitch to nozzle outlet. 18” adjustable length for length range of 79”-115”
48”
Standard 33”. 6” adjustable height for height range of 27”-39”.
Lawn-tractor style hitch (Category 1).
20 x 10-8, 4-ply turf tire.
Custom injection molded plastic.
Two-year or 1,500 hour limited warranty*
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
102
The Pro Force is manufactured
in Tomah, WI ISO 9002 Certified Plant.
Loading...