Toro 44536 Specifications

Debris Blower 600

The Toro® Debris Blower 600 creates incredible wind power to quickly clear large areas of unwanted debris.

POWER SOURCE

AIR FLOW

FAN SPEED

OUTLET AREA

DIRECTIONAL CONTROL

CASTER WHEELS

HEIGHT ADJUSTMENT

TURF PROTECTION

GROUND CLEARANCE

FAN

FAN HOUSING

DRIVE

WEIGHT

MOUNTING

DIMENSIONS

DEBRIS BLOWER 600, MODEL 44536*

Category one and two 3-point hitch of any tractor in the 25 PTO hp range with a 3-point hitch and 540 PTO.

7000 cfm.

1173 rpm @ 540 PTO input.

100 square inches (645 cm2).

Deflector chute for 180° diversion as standard.
Rotational control of diversion gate just behind 3-point hitch.

Two 13 x 5-6 pneumatic rubber tires.

0-1.5" (0-4 cm) adjustable in .5" (1.3 cm) increments.

16" (41 cm) long, 4" (10 cm) diameter turf roller behind fan housing. 8" (20 cm) long, 4" (10 cm) diameter turf roller under deflector chute. Beveled skid plate
under deflector chute.

Determined by turf tractor 3-point hitch and caster wheels.

Radial design with 27" (69 cm) diameter center disc, 8 blades. Outer diameter 36" (91 cm).

Split housing: upper and lower. Upper Housing – 12-gauge steel front and rear plates flanged at separation seam with 12-gauge steel rolled and flanged blower
band. Lower housing – 10-gauge steel front and rear plates flanged at separation seam with
12-gauge and blower band.

Belt drive 4-5VX. Power source: 30 PTO hp turf tractor with 3-point hitch and 540 PTO.

500 lbs. (227 kg)

Category one and two 3-point hitch of any tractor in the 30 PTO hp range with a 3-point hitch and 540 PTO.

Length: 49" (125 cm), Width: 59" (150 cm), Height: 46" (117 cm)

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

2014 Toro Commercial Equipment Guide 14-003-T Rev. 1/14

106