Toro 44507 Specifications

Topdresser 2500

This 25 cu. ft. Topdresser gives you precise control and consistently delivers an even application–whether light or heavy topdressing
is desired.

HOPPER CAPACITY

SPREADING WIDTH

TOP DRESSING SPEED

TRANSPORT SPEED

CONVEYOR BELT

METERING GATE

CONTROLS

DRIVE

TIRES

DIMENSIONS /WEIGHT

WARRANTY

TOPDRESSER 2500, MODEL 44507*

25 cu. ft. (698 liter) or up to 2,050 lbs. (930 kg).

60" (152 cm)

Variable to desired application rate. 2-8 mph (3-13 km/h).

Up to 12 mph (19 km/h). Optional brake kit available.

Seamless 60" (152 cm) wide belt, polyester mono-filament interwoven material w/gray PVC “v-pattern” traction surface.

Infinitely variable from closed to 3.5" (9 cm) opening for light to heavy applications. Flexible edge and spring release.

12-volt on/off switch at operator’s position to engage conveyor and brush. Metering gate runs full width in front of brush.

Hydraulic with chain driven pumps. Belt motor with chain reduction. Brush motor direct drive. Electric hydraulic solenoid control to activate topdress motors. Closed
loop hydraulic system with charge pump and 25 micron filtration.

(4) 18 x 10.5-8, 4-ply ribbed, high floatation turf tires on oscillating axle sets.

Height Width Overall Length Shipping Weight Maximum Weight

43" (109 cm) 72.5" (184 cm) 97.5" (248 cm) 1,454 lbs. (659 kg) 3,500 lbs. (1,589 kg)

Two-year limited warranty. refer to Operator’s Manual for further details.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for sale

may vary in design, required attachments and safety features. Consult your local Toro Distributor.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

128

The Topdresser 2500 is manufactured
in Tomah, WI ISO 2002 Certified Plant.