MULTI PRO® 5800 KEY FEATURES & ADVANTAGES
Overview
• The new Toro Multi Pro 5800 combines extensive customer input with advanced sprayer technology resulting in an innovative
design that provides many performance and operational advancements.
• Every aspect of the spray system was engineered to deliver unsurpassed spray accuracy and precision. Aggressive agitation
and faster response time consistently delivers desired spray rates in even the most demanding environments.
Kubota® Engine Powerful Liquid-cooled Diesel Engine
• Proven workhorse has the power to reliably and consistently complete the spray process.
• 4-cylinder, 4-cycle, water-cooled, diesel, 1.498 L.
• Rated output of 35.5 hp (26.5 kW).
• Biodiesel B-20 compatible.
Pro ControlTM XP
• The new Pro Control XP software is intuitive and provides faster, immediate response times. As a result, the application rate is more
accurate and performance is improved. Frequently used input values have been pre-loaded for greater ease of use.
• XP system automatically and instantaneously calibrates fl ow based on input changes, such as ground speed variations caused
by terrain, and when turning on/off boom sections, to maintain an even and accurate spray application rate.
• The Xtra Precision avoids waste and ensures maximum effi cacy of chemical applications.
Center Control Console
300 Gallon Tank
Agitation Nozzles
6-Diaphragm Pump
Plumbing System
• New center console places key switches at operator’s fi ngertips for ease-of-use and improved control.
• Common design to other Toro products reduces operator training.
• New dash layout positions controller, switches, gauges and lights in operator’s line of sight.
• A rounded tank design prevents chemicals from building up in ‘dead spots’. Square tanks with interior ledges and fl at bottoms
can lead to misapplication or residual chemicals left in the tank after the spray application.
• Tank incorporates a 16” side-offset fi ll well for easy access when loading chemicals.
• Durable polyethylene material won’t crack, dent, rust, chip or peel.
• Four, 30-degree, side-mounted, agitation nozzles continuously ‘roll’ the tank contents.
• This dynamic action suspends wettable powders and water-soluble granules to achieve industry-leading mixing and spray out.
• Nozzles are serviceable from outside of the spray tank.
• An industry fi rst! This unique pump produces up to twice the fl ow to simultaneously achieve higher spray volumes and aggressive
agitation needs.
• While spraying, the pump continuously agitates tank contents for a homogeneous mix and more accurate application of chemicals
from start to fi nish, saving chemical costs and ensuring effi cacy.
• The pump is always on, even when agitation is off. This provides instant pressure, to achieve the desired spray rate, rather than
having a delay to spool up the pump.
CleanloadTM Eductor
• ARAG boom valves have improved reliability, quicker response and reduced downtime.
• The bypass valves (manifold of 3) are included in a Manual Mode Spray Kit.
• Modular design - simply add on more valves from the accessory kits.
• The agitation bypass allows you to adjust agitation pressure to match spray pressure when turning agitation on or off.
• This on-board mixing station allows rapid and safe loading of any chemical without the need to fi rst mix into a slurry.
• Powerful venturi creates suction to safely and effi ciently pull material into the chemical tank.
• Incorporates a built-in bottle wash nozzle and includes a suction lance to pull in powdered or liquid products from their container.
• Stores within the width of the machine.
30 Gallon Fresh Water Rinse Kit
Truss-Style Boom System
Drift Reduction Boom Shroud
Ultra Sonic Boom
Electric Hose Reel
TM
Leveling System
MULTI PRO® 5800 KEY FEATURES & ADVANTAGES
• Nesting inconspicuously behind the main tank, this system includes a separate electric pump, plumbing and dual rinse nozzles.
• At 10 gallons (38 l) per cycle, it has on-board capacity to complete a triple rinse process.
• Automatic rinse system is safely and conveniently controlled from operator seat.
• Tremendous time, water and labor savings compared to the traditional manual method.
• Bidirectional break away capability. Folds in criss-cross position for storage.
• Rugged truss design handles accidental impacts.
• Hydraulic boom lift cylinders provide improved speed and control for better operation over undulating turf and improved force,
duty cycle and response time.
• Cylinder shafts have a Nitro Steel plating to prevent rust and corrosion.
• Extends 12” (30.5 cm) below the boom to minimize chemical drift in breezy conditions while retaining full boom system
functionality.
• Achieved LERAP 3-Star certifi cation for reducing drift by 90% compared to non-shrouded boom, when used in conjunction with
the Air Induction TeeJet (AIC) nozzles.
• Mounts to any Toro truss style boom system.
• New sonar sensors automatically maintain proper spray height over undulating turf.
• Compatible with open boom system or in conjunction with Drift Reduction Boom Shroud system.
• Response sensitivity is accurate to +/-2.5” at 4 mph on turf at 1” height of cut.
• Operational range of 10 degrees below level to vertical.
• Breakaway sensor mounts resist damage due to accidental impacts with trees or posts.
• 150’ (45.7 m) of hose for hand or walk spraying applications.
• New remote mounted control box with on/off switch, pressure adjustment switch and pressure gauge.
• Convenient electric powered rewind.
• Spray gun has an adjustable nozzle from stream to fan.
Pro Foam Marking Kit
• Foam dollops ensure accurate parallel path tracking.
• Select foam for either boom independently or both simultaneously.
• Adjust for desired amount of foam with valve on dash.
Spray Nozzles
AIC TwinJet TurfJet XRC
• Full range of contact, systemic and low drift nozzles are available. New air induction nozzles provide improved accuracy,
more uniform droplets, reduced drift and even coverage.
• Systemic nozzles provide excellent spray distribution through a wide angle, fl at spray pattern. Their larger droplets result in less drift.
• Contact nozzles provide a varying spray distribution depending on pressure. Their variability allows for better coverage at higher
pressures and less drift at lower pressures.
Fully Enclosed Cab with AC Sunshade Canopy
Hahn® Spray Bug
TM
• Hahn Application Products offers the Spray Bug for use with the Toro Multi Pro sprayers.
• The Spray Bug is an electric powered, self-propelled walking boom system with a self-contained 10 gallon spray tank and complete
spray system.
• The Spray Bug operates at a consistent 2.4 miles per hour for accurate calibration.
• A trailer is available for transportation around the golf course.
• For pricing and availability, contact Hahn Application Products at 866-397-5743.
• Full-view operator safety cab with AC, wiper and mirror options.
– All steel welded structure with green tempered glass and white ABS roof.
– Ships fully assembled.
• Hard shell sunshade canopy.
– Windshield option.
• Available from Custom Products of Litchfi eld at 800-CAB-LINE or (800-222-5463).
© 2010 The Toro Company. Specifi cations and design subject to change without notice. Part No. 10-083-T