Toro 41593 Brochure
SIMPLE STEPS
4
to complete
1
2
3
CHOOSE SYSTEMIC
OR CONTACT NOZZLES
FIND THE NOZZLE THAT
FITS YOUR APPLICATION
• herbicides • fungicides • insecticides
• liquid fertilizer • drift
ORDER THE CORRECT
CAPS, GASKETS AND
TIP STRAINERS
YOUR SPRAYER
4
SELECT THE DESIRED
MAIN SUCTION
LINE FILTER
• 80 mesh • 50 mesh • 30 mesh
CHOOSE YOUR NOZZLE
1
SYSTEMIC NOZZLES
OPEN BOOM
EXCELLENT VERY GOOD GOOD
Herbicides
Soil Incorporated
Pre-Emergence
Post-Emergence
Fungicides
Insecticides
Liquid Fertilizer
Drift
AIC TeeJet® (Air Induction Flat Fan)
The AIC TeeJet® (Air Induction Flat Fan) nozzle is a good general
purpose nozzle that can be used for both contact and systemic
applications. The spray pattern is 110 degrees with tapered edges
similar to a standard flat fan. This nozzle produces coarse air-filled
droplets with a venturi air aspirator. The air-filled drops reduce spray
drift but provide good contact coverage. Air Induction nozzles can
be operated at higher spray pressures without creating excessive
spray drift. Distribution AIC nozzles are best when used at pressures
above 30 psi.
TurfJet Wide Angle Flat Spray
The TurfJet is a wide 130 degree angle nozzle with a tapered fan
pattern. The TurfJet is best suited for systemic applications where
distribution quality is the primary goal. The TurfJet creates extra
coarse droplets and provides good drift control. Distribution quality is
excellent at all pressures.
CONTACT NOZZLES
EXCELLENT VERY GOOD GOOD
Herbicides
Soil Incorporated
Pre-Emergence
Post-Emergence
Fungicides
Insecticides
Liquid Fertilizer
Drift
Air Induction Turbo TwinJet
The Air Induction Turbo TwinJet® is an air induction style nozzle with
two separate 110 degree spray patterns. One spray pattern is directed
forward of vertical and the second pattern is directed rear of vertical.
This nozzle creates medium and coarse droplets and is an excellent
nozzle for contact applications where drift control is needed. The two
independent spray patterns improve contact coverage by spraying
the turf at two different angles.
XRC TeeJet® Flat Fan
The Standard XRC Flat Fan nozzle has a 110 degree tapered spray
pattern and produces medium and fine droplets. Because of the
smaller droplets the Standard XRC Flat Fan is best suited for contact
applications where drift control is not needed.
AIC GOOD EXCELLENT EXCELLENT
AI Turbo TwinJet EXCELLENT GOOD GOOD
TurfJet POOR EXCELLENT EXCELLENT
XRC EXCELLENT GOOD POOR
•
•
•
•
•
•
•
ANY BOOM
•
•
•
•
•
•
•
•
®
CONTACT SYSTEMIC DRIFT
PRODUCTS PRODUCTS CONTROL
Systemic nozzles provide
excellent spray distribution
through a wide angle,
flat spray pattern. These
nozzles are excellent at
reducing spray drift.
Contact nozzles provide
excellent spray distribution
over a wide range of
pressures. These nozzles
allow for better coverage
at higher pressures.
Toro exclusive AI Turbo
Twin Jet in the 0.8, 1.0
and 1.5 sizes.
Tip Strainers
2
Nozzle
Nozzle
Selection Guide
Selection Guide
REMEMBER TO FILL
ALL THREE NOZZLES
on your turret to complete a variety
of applications.
ORDER THE CORRECT CAPS,
GASKETS AND TIP STRAINERS
Cap Gasket † Tip Strainer
AIC Included 40998 120-0698 or
AI Turbo TwinJet
TurfJet
XRC
† Gaskets are included with the nozzles/caps.
Order if extra gaskets are required.
120-8570
95-9186
Included
120-0699
40998
120-0699
40998
120-0699
40998
120-0699
120-0698 or
120-0698 or
120-0698 or
43
SELECT THE DESIRED MAIN
SUCTION LINE FILTER
Description 80 mesh 50 mesh 30 mesh
Part Number
100-8642 100-6991
100-6992
Multi Pro Spray Nozzle Selection Guide
Color Nozzle Toro Spray Capacity Flow Gallons Per Acre - 20" Nozzle Spacing Gallons per 1000 sq ft - 20" Nozzle Spacing
Code Options Part#
AIC 120-0700 20 0.14 18 13.9 11.9 10.4 9.2 8.3 7.6 6.9 6.4 5.9 0.38 0.32 0.27 0.24 0.21 0.19 0.17 0.16
AI Turbo TwinJet** 120-0707 30 0.17 22 16.8 14.4 12.6 11.2 10.1 9.2 8.4 7.8 7.2 0.46 0.39 0.33 0.29 0.26 0.23 0.21 0.19
Yellow TurfJet** 95-9221 40 0.20 26 19.8 17.0 14.9 13.2 11.9 10.8 9.9 9.1 8.5 0.54 0.45 0.39 0.34 0.30 0.27 0.25 0.23
0.2 gpm* XRC
60 0.24 31 23.8 20.4 17.8 15.8 14.3 13.0 11.9 11.0 10.2 0.65 0.54 0.47 0.41 0.36 0.33 0.30 0.27
Tip Strainer - 100 120-0698 70 0.26 33 25.7 22.1 19.3 17.2 15.4 14.0 12.9 11.9 11.0 0.71 0.59 0.51 0.44 0.39 0.35 0.32 0.30
AIC 120-0701 20 0.28 36 27.7 23.8 20.8 18.5 16.6 15.1 13.9 12.8 11.9 0.76 0.63 0.54 0.48 0.42 0.38 0.35 0.32
AI Turbo TwinJet** 120-0708 30 0.35 45 34.7 29.7 26.0 23.1 20.8 18.9 17.3 16.0 14.9 0.95 0.79 0.68 0.60 0.53 0.48 0.43 0.40
Red TurfJet** 95-9222 40 0.40 51 39.6 33.9 29.7 26.4 23.8 21.6 19.8 18.3 17.0 1.09 0.91 0.78 0.68 0.60 0.54 0.49 0.45
0.4 gpm* XRC 117-5834 50 0.45 58 44.6 38.2 33.4 29.7 26.7 24.3 22.3 20.6 19.1 1.22 1.02 0.87 0.77 0.68 0.61 0.56 0.51
60 0.49 63 48.5 41.6 36.4 32.3 29.1 26.5 24.3 22.4 20.8 1.33 1.11 0.95 0.83 0.74 0.67 0.61 0.56
Tip Strainer - 50 120-0699 70 0.53 68 52.5 45.0 39.4 35.0 31.5 28.6 26.2 24.2 22.5 1.44 1.20 1.03 0.90 0.80 0.72 0.66 0.60
AIC 120-0702 20 0.35 45 34.7 29.7 26.0 23.1 20.8 18.9 17.3 16.0 14.9 0.95 0.79 0.68 0.60 0.53 0.48 0.43 0.40
AI Turbo TwinJet** 120-0709 30 0.43 55 42.6 36.5 31.9 28.4 25.5 23.2 21.3 19.7 18.2 1.17 0.97 0.84 0.73 0.65 0.58 0.53 0.49
Brown TurfJet** 95-9223 40 0.50 64 49.5 42.4 37.1 33.0 29.7 27.0 24.8 22.9 21.2 1.36 1.13 0.97 0.85 0.76 0.68 0.62 0.57
0.5 gpm* XRC 117-5835 50 0.56 72 55.4 47.5 41.6 37.0 33.3 30.2 27.7 25.6 23.8 1.52 1.27 1.09 0.95 0.85 0.76 0.69 0.63
60 0.61 78 60.4 51.8 45.3 40.3 36.2 32.9 30.2 27.9 25.9 1.66 1.38 1.19 1.04 0.92 0.83 0.75 0.69
Tip Strainer - 50 120-0699 70 0.66 84 65.3 56.0 49.0 43.6 39.2 35.6 32.7 30.2 28.0 1.80 1.50 1.28 1.12 1.00 0.90 0.82 0.75
AIC 120-0703 20 0.42 54 41.6 35.6 31.2 27.7 25.0 22.7 20.8 19.2 17.8 1.14 0.95 0.82 0.71 0.63 0.57 0.52 0.48
AI Turbo TwinJet** 120-0710 30 0.52 67 51.5 44.1 38.6 34.3 30.9 28.1 25.7 23.8 22.1 1.41 1.18 1.01 0.88 0.79 0.71 0.64 0.59
Gray TurfJet** 95-9224 40 0.60 77 59.4 50.9 44.6 39.6 35.6 32.4 29.7 27.4 25.5 1.63 1.36 1.17 1.02 0.91 0.82 0.74 0.68
0.6 gpm* XRC 117-5836 50 0.67 86 66.3 56.9 49.8 44.2 39.8 36.2 33.2 30.6 28.4 1.82 1.52 1.30 1.14 1.01 0.91 0.83 0.76
60 0.73 93 72.3 62.0 54.2 48.2 43.4 39.4 36.1 33.4 31.0 1.99 1.65 1.42 1.24 1.10 0.99 0.90 0.83
Tip Strainer - 50 120-0699 70 0.79 101 78.2 67.0 58.7 52.1 46.9 42.7 39.1 36.1 33.5 2.15 1.79 1.53 1.34 1.19 1.07 0.98 0.90
AIC 120-0704 20 0.57 73 56.4 48.4 42.3 37.6 33.9 30.8 28.2 26.0 24.2 1.55 1.29 1.11 0.97 0.86 0.78 0.70 0.65
AI Turbo TwinJet 120-0711 30 0.69 88 68.3 58.6 51.2 45.5 41.0 37.3 34.2 31.5 29.3 1.88 1.56 1.34 1.17 1.04 0.94 0.85 0.78
White TurfJet** 95-9225 40 0.80 102 79.2 67.9 59.4 52.8 47.5 43.2 39.6 36.6 33.9 2.18 1.81 1.55 1.36 1.21 1.09 0.99 0.91
0.8 gpm* XRC 117-5837 50 0.89 114 88.1 75.5 66.1 58.7 52.9 48.1 44.1 40.7 37.8 2.42 2.02 1.73 1.51 1.34 1.21 1.10 1.01
60 0.98 125 97.0 83.2 72.8 64.7 58.2 52.9 48.5 44.8 41.6 2.67 2.22 1.90 1.67 1.48 1.33 1.21 1.11
Tip Strainer - 50 120-0699 70 1.06 136 104.9 90.0 78.7 70.0 63.0 57.2 52.5 48.4 45.0 2.88 2.40 2.06 1.80 1.60 1.44 1.31 1.20
AIC 120-0705 20 0.71 91 70.3 60.3 52.7 46.9 42.2 38.3 35.2 32.4 30.1 1.93 1.61 1.38 1.21 1.07 0.97 0.88 0.80
AI Turbo TwinJet 120-0712 30 0.87 111 86.1 73.8 64.6 57.4 51.7 47.0 43.1 39.8 36.9 2.37 1.97 1.69 1.48 1.31 1.18 1.08 0.99
Blue TurfJet** 95-9188 40 1.00 128 99.0 84.9 74.3 66.0 59.4 54.0 49.5 45.7 42.4 2.72 2.27 1.94 1.70 1.51 1.36 1.24 1.13
1.0 gpm* XRC 117-5838 50 1.12 143 110.9 95.0 83.2 73.9 66.5 60.5 55.4 51.2 47.5 3.05 2.54 2.18 1.90 1.69 1.52 1.38 1.27
60 1.22 156 120.8 103.5 90.6 80.5 72.5 65.9 60.4 55.7 51.8 3.32 2.77 2.37 2.07 1.84 1.66 1.51 1.38
Tip Strainer - 50 120-0699 70 1.32 169 130.7 112.0 98.0 87.1 78.4 71.3 65.3 60.3 56.0 3.59 2.99 2.56 2.24 1.99 1.80 1.63 1.50
AIC 120-0706 20 1.06 136 104.9 90.0 78.7 70.0 63.0 57.2 52.5 48.4 45.0 2.88 2.40 2.06 1.80 1.60 1.44 1.31 1.20
AI Turbo TwinJet 120-0713 30 1.30 166 128.7 110.3 96.5 85.8 77.2 70.2 64.4 59.4 55.2 3.54 2.95 2.53 2.21 1.96 1.77 1.61 1.47
Green TurfJet** 95-9226 40 1.50 192 148.5 127.3 111.4 99.0 89.1 81.0 74.3 68.5 63.6 4.08 3.40 2.91 2.55 2.27 2.04 1.85 1.70
1.5 gpm* XRC 117-5839 50 1.68 215 166.3 142.6 124.7 110.9 99.8 90.7 83.2 76.8 71.3 4.57 3.81 3.26 2.86 2.54 2.28 2.08 1.90
60 1.84 236 182.2 156.1 136.6 121.4 109.3 99.4 91.1 84.1 78.1 5.00 4.17 3.57 3.13 2.78 2.50 2.27 2.09
Tip Strainer - 50 120-0699 70 1.98 253 196.0 168.0 147.0 130.7 117.6 106.9 98.0 90.5 84.0 5.39 4.49 3.85 3.37 2.99 2.69 2.45 2.24
Not Available
Pressure 1 Nozzle oz per 3 3.5 4 4.5 5 5.5 6 6.5 7 2.5 3 3.5 4 4.5 5 5.5 6
in PSI in GPM min mph mph mph mph mph mph mph mph mph mph mph mph mph mph mph mph mph
50 0.22 28 21.8 18.7 16.3 14.5 13.1 11.9 10.9 10.1 9.3 0.60 0.50 0.43 0.37 0.33 0.30 0.27 0.25
80 mesh 100-6992
(Standard Equipment)
50 mesh 100-8642
30 mesh 100-6991
Loading...