Multi Pro® 5800
Extensive customer input and advanced sprayer technology are built into this innovative dedicated sprayer providing numerous
performance and operational enhancements.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
133
ENGINE
COOLING SYSTEM
FUEL SYSTEM
TRACTION SYSTEM
GROUND SPEED/CLEARANCE
TIRES
BRAKES
MAIN FRAME
SUSPENSION
STEERING
GAUGES/INDICATORS
CONTROLS
SEATS
ELECTRICAL FEATURES
LIGHTS
SOUND LEVEL
WEIGHT
DIMENSIONS
WARRANTY
CERTIFICATION
Multi Pro® 5800 Specifications
*
MULTI PRO 5800, MODEL 41593 MULTI PRO 5800, MODEL 41594
Kubota® V1505 N/A, Horizontal, 4-cylinder, 4-cycle, water-cooled, diesel,
1.498L. Rated output 36.5 hp (27.2 kW). Biodiesel B-20 compatible.
Mid-mounted 3.3 quart radiator with oil cooler mounted in front
12 gallon (45 L) polyethylene fuel tank with 1.5" (38 mm) opening on the
passenger side for fueling; Vented fuel cap with mechanical style float gauge,
In-line fuel replacement filter (diesel fuel).
Hydrostatic system driving double planetary gear reduction rear wheel drives; Foot pedal control of forward/reverse ground speed
Forward: 0-10 mph (0-16.1 km/h). Reverse: 0-4 mph (0-6.4 km/h).
Front: 23” diameter, 4-ply rated tire with turf tread pattern; Wheel has 5-hole bolt pattern for lugs.
Rear: 26.5” diameter, 4-ply rated tire with turf tread pattern; Wheel has 8-hole bolt pattern for lugs.
2 wheel mechanical cable operated multi disc wet brakes with additional hydrostatic braking through drive train
Welded high strength steel tubular construction
Front: Straight axle with twin independent leaf springs and dual shock absorbers. Rear: Rigid with high floatation tires.
Fully hydraulic with dedicated power source 48° steering angle
Ignition key switch; Voltage level warning lamp; Coolant temperature warning lamp; Glow plug indicator lamp; Engine oil pressure warning lamp; Spray system
pressure gauge.
Throttle control; Spray pump control switch; Jet agitator switch; Individual boom On/Off switches; Indicator lights on pump Switch; Agitator and boom switches;
Headlight Switch; Hour Meter; Speed control switch with indicator light; Plugs for accessory switches
Bucket seats with easy tilt forward bracket; removable bolts allow for adjustment for various seat positions; Seats are interchangeable from left to right
12 volt. 690 cold cranking amps at 0° F (-18° C). 12 volt, 60 Amp alternator. Dash mounted ignition switch, with glow plug timing circuit.
Rectangular 12 volt halogen sealed beam headlights.
86 dB(A) at operator ear under normal operation
Drive-on weight: 2,700 lbs. (1,225 kg), Shipping weight: 2,700 lbs. (1,225 kg), Empty vehicle: 2,700 lbs. (1,225 kg),
5525 lbs.(2506 kg), MGVW: 6525 lbs.(2960 kg).
Measurements with spray system—
Overall Length: 154" (391 cm) booms forward. Turning Diameter: 15’-7” (4.7m) front tire inside
Overall Width: 81" (175 cm) booms forward. 26’-7” (8.1m) front tire outside
Height: 57.5" (146 cm)
Two-year limited warranty. Refer to the Operator’s Manual for further details.
SAE 2258 Dec 2003 and EU 98/37EC Machinery Directive
Kubota® WG1605, Rated Output: 50 hp (37.3 kw), 1.6L, 4-cylinder liquid-cooled
electronic fuel injection, throttle control, three-way catalytic converter,
gear-driven valve train, and a diagnostic port.
12 gallon (45 L) polyethylene/Nylon low-permeation fuel tank with 1.5" (38 mm)
opening on the passenger side for fueling; 3.5 psi Vented fuel cap with electronic
fuel gauge on the console, In-tank fuel replacement filter, (unleaded gasoline).
SOLUTION TANK
RATED CAPACITY
SPRAY PUMP
AGITATOR
CONTROLS
OPTIONS
BOOM ASSEMBLY
SPRAY NOZZLES
A Safety Reminder: Prior to any application, know the chemical content and the manufacturer’s recommendation for protective clothing.
Always wear proper clothing and mask when applying chemicals.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
High density, impact resistant polyethylene with large 16” (41cm) fill well
300 gallon (1,136 liter)
6-diaphragm adjustable hydraulic drive; 40 gpm (151 lpm), 220 psi (1500 kpa) maximums
4, side-mounted jet agitation nozzles for full tank agitation.
Throttle lock, agitation on/off switch, master pump switch, boom raise/lower rocker switches. Boom section on/off rocker switches, manual/automatic mode switch
and engine speed control.
Pro ControlTM XP Spray System console Model Number 41604; Speedometer Kit Part Number 106-4839; Turf Sprayer Kit (CE) 106-4841; Heat Shield Blanket Kit 1064843; Eductor (Clean Load) Model Number 41622; Rinse Kit Model Number 41614; Electric Hose Reel Kit Model Number 41621; Spray Gun Kit Model Number 41118;
Foam Marker Model Number 41232; Ultra Sonic Boom Kit Model Number 41219; Cab with A/C (From Custom Products); Sunshade (From Custom Products); Kubota 60
Amp alternator kit Part Number 117-5540; Toro Covered Boom Shroud Kit Model Number 41602.
Nozzles: Single Nozzle Kit Model Number 41024; Homologation Kit Model Number 41603
18.5’ (5.6 m) three section, triangular truss-style open booms, expandable to 20.5' (6.3 m) with optional kit.
Drift reduction, quick-disconnect with diaphragm check valves. Triple turret mount.
134
SPRAYER SPECIFICATIONS
OPEN BOOM (STANDARD)
The Multi Pro 5800 is manufactured in
Tomah, WI ISO 9002 Certified Plant.
PRO CONTROL XP SPRAY
SYSTEM CONSOLE
SPEEDOMETER KIT
TURF SPRAYER KIT (CE)
HEAT SHIELD BLANKET KIT
CLEANLOAD EDUCTOR KIT
30 GAL (114 I)
FRESH WATER RINSE KIT
ELECTRIC HOSE REEL KIT
SPRAY GUN KIT
PRO FOAM MARKING KIT
ULTRA SONIC
BOOM LEVELING KIT
FULLY ENCLOSED CAB
AIR CONDITIONER
DRIFT REDUCTION
BOOM SHROUD
SINGLE NOZZLE KIT
SPRAY NOZZLES
SUNSHADE
HOMOLOGATION KIT
BBA KIT
MANUAL SPRAY KIT
Multi Pro® 5800 Accessories
*
MULTI PRO 5800 ACCESSORIES
The eXtra Precision avoids waste and ensures maximum efficacy of chemical applications. Simple programming for two preset application rates, plus a manual override
mode for spot spraying. XP system automatically and instantaneously calibrates flow to maintain an even and accurate spray application rate. Also compensates for
system input changes, such as ground speed variations caused by terrain, and when turning on/off boom sections. Model Number 41604
Part Number 106-4839
Part Number 106-4841
Part Number 106-4843
This on-board mixing station allows rapid and safe loading of any chemical without the need to first mix into a slurry. Incorporates a built-in bottle wash nozzle and
has an optional suction lance to pull in powered to liquid products from their container. Stores within the width of the spray vehicle. Model Number 41622
Nesting inconspicuously behind the main tank, this system includes a separate electric pump, plumbing and dual rinse nozzles. At 10 gallons (38 l) per cycle, it has
on-board capacity to complete a triple rinse process. Model Number 41614
150’ (45.7 m) of hose for hand or walk spraying applications. Convenient electric powered rewind. Spray gun has an adjustable nozzle from stream to fan. Model
Number 41621.
Model Number 41118
Foam dollops ensure accurate parallel path tracking. Select foam for either boom or both. Model Number 41232
New sonar sensors automatically maintain proper spray height over undulating turf. Model Number 41219
Full-view operator safety cab with AC, wiper and mirror options. (From Custom Products of Litchfield, 1-800-CAB-LINE)
Custom Products of Litchfield, 1-800-CAB-LINE.
Extends 12” (30.5 cm) below the boom to minimize chemical drift in breezy conditions while retaining full boom system functionality. Model Number 41602
Model Number 41024
Full range of contact, systemic and low drift nozzles are available. New air inclusion nozzles provide improved accuracy, more uniform droplets, reduced drift and even
coverage.
Hard shell sunshade canopy w/windshield option. (From Custom Products of Litchfield, 1-800-CAB-LINE)
Model Number 41603. Road light kit (turn signals, beacon, license plate holder).
Model Number 41608. CE/German requirement. Includes fresh water rinse kit and plumbing for BBA compliance.
Adds a separate control module to operate the sprayer without a ProControlTM XP. Part Number 132-5570
A Safety Reminder: Prior to any application, know the chemical content and the manufacturer’s recommendation for protective clothing. Always
wear proper clothing and mask when applying chemicals.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
135
The Multi Pro 5800 is manufactured in
Tomah, WI ISO 9002 Certified Plant.
Loading...