Toro 41240 Specifications

Workman® HD Series

The Workman® HD Series is designed with your toughest work challenges in mind, from the front bumper to the rear bumper and everything in between. Design components like an I-beam-shaped DeDion rear axle, a truss-like front space frame, integrated wheel bearings and 4-wheel hydraulic disc brakes provide the highest total towing capacity in the industry and make the Workman ready for the toughest challenges.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

Workman® HD Series Specifications*

ENGINE

CLUTCH

INSTRUMENTATION

ALTERNATOR

TIRES

COOLING SYSTEM

AIR CLEANER

CLEARANCE CIRCLE 2WD

CLEARANCE CIRCLE 4WD

FUEL CAPACITY

FUEL PUMP

FUEL FILTER

HORN

SOUND LEVEL

VEHICLE SHIPPING WEIGHT

VEHICLE ACTUAL

WEIGHT W/O FUEL

TOTAL CAPACITY

CARGO BED CAPACITY W/200

LB. OPERATOR AND 200 LB.

PASSENGER

WORKMAN HDX, NO BED, MODEL 07383

WORKMAN HDX, W/BED, MODEL 07384

WORKMAN HDX W/BED, MODEL 07384TC

WORKMAN HDX - 4WD, MODEL 07386

WORKMAN HDX - 4WD, MODEL 07386TC

Kubota® 972 EFI, 32.5 hp (24.2 kw), 4-cycle, liquidcooled, 962 cc, 3-cylinder overheated camshaft, counterbalanced gasoline engine. Governed maximum of 32.5 hp at 3600 rpm. Rear engine location direct coupled to a transaxle. 12-volt electric starter. Fuel Injected is a closed loop system with oxygen sensor to adjust air/fuel ratio and manifold pressure sensor to adjust for altitude. Full pressure lubrication with spinon oil filter. Meets all EPA & CARB emission standards

7.5" (19cm) clutch and pressure plate

Fuel and coolant temperature gauges. Hour meter. Oil pressure, check engine and battery charge indicator lights. Tachometer and speedometer.

60 amp with electronic regulator 25 amp with electronic regulator

Front: 20” x 9” - 12, 6-ply rating, turf tread Rear: 24” x 12” - 12, 6-ply rating, turf tread

Aluminum radiator with 10 fins per inch dual pass. Right side mounted with removable screen for debris cleaning. Thermal controlled DC electric fan.

Remote mounted, heavy-duty 2-stage air cleaner with evacuator valve. Large capacity, dual element.

Inside = 32 in (81 cm); Outside = 194 in (493 cm)

Inside = 100 in (254 cm); Outside = 300 in (726 cm) N/A

6 gallons (22.7 liters)

12V internally regulated 42 psi in-tank Electronic pump Diaphragm pump

In tank filter sock. 10 micron polyester depth.

Standard, button on dash on 07384TC & 07386TC. Optional on 07383, 07384 & 07386.

75 db(A)** 85 db(A)** 80 db(A)**

Model 07383: 1623 lbs (738 kg) Model 07384: 1951 lbs (887 kg) Model 07384TC: 2725 lbs (1238 kg) Model 07386: 2010 lbs (914 kg) Model 07386TC: 2784 lbs (1265 kg)

Model 07383: 1623 lbs (738 kg) Model 07384: 1951 lbs (887 kg) Model 07384TC: 2032 lbs (924 kg) Model 07386: 2010 lbs (914 kg) Model 07386TC: 2091 lbs (950 kg)

Model 07384:3249(1477kg) Model07384TC:3168(1440kg) Model 07386:3190 (1450kg) Model 07386TC:3109 (1413kg)

Model 07384: 2849 lbs (1295 kg) Model 07384TC: 2768 lbs (1258 kg) Model 07386: 2790 lbs (1268 kg) Model 07386TC: 2709 lbs (1231 kg)

WORKMAN HDX - D MODEL 07385

WORKMAN HDX - D MODEL 07385TC

WORKMAN HDX - D - 4WD, MODEL 07387

WORKMAN HDX - D - 4WD, MODEL 07387TC

Kubota 902D, 3-cylinder, inline vertical, 4-cycle,liquid cooled, counterbalanced diesel engine, 23.3 hp (18.5kw); governed to a maximum speed of 3600 rpm. 58.0 cu. in (950 cc) displacement. Rear engine location. Direct couple to transaxle. 12-volt electric starter. Full pressure lubrication with spin-on oil filter. Meets EPA Tier IV compliance. Biodiesel ready for use up to B-20 (20% biodiesel and 80% petrol blend). Meets all EPA & CARB emission standards.

Fuel and coolant temperature gauges. Hour meter. Oil pressure, glow plug and battery charge indicator lights. Tachometer and speedometer.

Combination fuel filter / water separator with a 30 micron filtration and 50 mesh suction screen in tank.

Standard, button on dash on 07385TC & 07387TC. Optional on 07385 & 07387.

Model 07385: 1956 lbs (889 kg) Model 07385TC: 2730 lbs (1240 kg) Model 07387: 2015 lbs (916 kg) Model 07387TC: 2789 lbs (1268 kg)

Model 07385: 1956 lbs (889 kg) Model 07385TC: 2037 lbs (926 kg) Model 07387: 2015 lbs (916 kg) Model 07387TC: 2096 lbs (953 kg)

Model 07385:3244 lbs. (1475 kg) Model 07385TC:3163 lbs. (1438 kg) Model 07387: 3185 lbs. (1448 kg) Model 07387TC: 3104 lbs. (1411 kg)

Model 07385: 2844 lbs.(1293 kg) Model 07385TC: 2763 lbs. (1256 kg) Model 07387: 2785 lbs. (1266 kg) Model 07387TC: 2704 lbs. (1229 kg)

WORKMAN HD, MODEL 07369

Kohler Model CH23, 2-cylinder, 4-cycle, air-cooled engine. 23 hp (17.2 kW) at 3600 rpm governed to a maximum speed of 3600 rpm by an internal governor. 41.1 cu. in. (674 cc) displacement. Electronic ignition. Rear engine location direct coupled to a transaxle. 12-volt electric starter. Full pressure lubrication with spin-on oil filter. Meets all EPA & CARB emission standards.

Fuel gauge, hour meter, oil pressure warning light and battery charge indicator light. Tachometer / speedometer optional.

Fan forced air.

In-line 40 micron filter and 50 mesh suction screen in tank.

Optional

Model 07369: 1848 lbs (840 kg)

Model 07369: 3352 lbs. (1524 kg)

Model 07369: 2952 lbs. (1342 kg)

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

**At operator's ear; 3600 rpm with bed and sides installed.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

The Workman HD utility vehicle is manufactured in Tomah, WI ISO 9002 Certified Plant.

Workman® HD Series Specifications* (continued)

SPECIFICATIONS COMMON TO WORKMAN HD SERIES VEHICLES

FRONT SUSPENSION Independent system with dual “A” frame control arms, dual coil springs and dual shock absorbers with anti-sway bar. Provides 5 3/4” travel.

REAR SUSPENSION DeDion rear axle (weight carrying axle) suspension independent of transaxle with dual leaf springs and dual shock absorbers. Provides 3” travel.

BATTERY 12-volt, group 26, with 540 cold cranking amps at 0 degrees F (-18 degrees C).

TRANSMISSION

3RD GEAR HIGH LOCKOUT Interlock key switch that prevents engine from running in 3rd gear, high range HDX-D. Limits engine RPM to 2,200 in 3rd gear high range (HDX gas).

DIFFERENTIAL LOCK Manual engage rear differential lock.

4WD SYSTEM

STEERING

2-POST ROPS 2-post rollover protective structure and protective back panel bolted to ROPS.

BRAKES

HYDRAULICS

SEAT BELTS / SEATS Lap seat belts standard. Bucket seats with adjustable slides to allow for various seat positions. Hip restraint tubes welded to seat mounting straps.

CONTROLS Throttle, brake and clutch pedals. Gear shifter, differential lock, parking brake, high-low range shifter and hydraulic lift levers.

INTERLOCK

SAFETY SUPPORT 7-gauge steel channel stores behind seat and fits over extended lift cylinder to prevent accidental lowering of bed.

GROUND CLEARANCE 7” (18 cm) with no load.

REAR TOW HITCH

GROUND SPEED

DIMENSIONS

CERTIFICATIONS

WARRANTY Two-year limited warranty. See Operator’s Manual for further details.

Rear transaxle directly connected to engine, twin axle drive. 3-speed synchromesh (forward speeds only), h-shift pattern with high-low range providing 6 forward speeds and 2 in reverse. Transmission housing doubles as hydraulic reservoir with outlet screen and external filter.

Fully automatic on-demand, bi-directional system. Uses dual bi-directional clutches. In event of rear tire slippage, clutches transmit power proportionally to front wheel with highest traction.

FRAME Steel space frame front frame and C-channel rear frame.

Hydraulic power steering with with steering valve coupled to hydraulic cylinder with thru shaft. Maximum steering angle is 70 degrees on 2WD and 50 degrees on 4WD.

4-wheel hydraulic disk brake system. 9 1/2” disk with hydraulic service brakes using twin piston floating calipers. Parking brake uses mechanical cable actuated caliper on rear wheels.

4 gpm (15 lpm) gear pump provides hydraulic flow for power steering and lift in series. Lift control valve with quick disconnects for dual lift cylinders or for attachments when quick disconnects are switched. 8 quart total capacity.

LIGHTS Twin halogen headlights and dual taillights actuated by switch on dash. Dual brake lights actuated by brake pedal.

To start engine, clutch pedal must be depressed and remote hydraulic lever must be in neutral position. If installed, high flow hydraulics and rear PTO must be disengaged / switched off.

Steel hitch bracket bolted to rear DeDion axle. Mounting plate provides mounting hole for pin or ball hitch and incorporates two safety chain mounting holes. Maximum tongue weight of 600 lbs (272 kg). Maximum trailer weight of 3500 lbs (1587 kg). Trailers over 1500 lbs. require trailer brakes. (Electric Brake Kit available through parts, 117-4837).

Standard Tires, Gear 1/2/3

Forward Speeds: High Range 7.6/11.5/19.8 mph (12.2/18.5/31.9 km/h) Low Range 2.9/4.5/7.7 mph (4.7/7.2/12.5 km/h) Reverse Speeds: High Range 7.1 mph (11.6 km/h) Low Range 2.8 mph (4.5 km/h)

Overall Length Overall Width Overall Height (Top of ROPS)

127.6 in (324 cm) w/o bed 64.7 in (164.3 cm) 75.8 in (192.5 cm) 130 in (330 cm) w/ full bed

Certified to meet SAE J2258. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer. Certified to meet the CE Machinery Directive.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

The Workman HD utility vehicle is manufactured in Tomah, WI ISO 9002 Certified Plant.

FULL AREA FLAT BED

FULL FLAT BED SIDE KIT

1/3 FLAT BED

1/3 FLAT BED STAKE SIDE KIT

2/3 FLAT BED

2/3 FLAT BED SIDE KIT

FULL FLAT BED FOLD DOWN

SIDE KIT

HIGH FLOW HYDRAULICS KIT

200 GALLON SPRAYER

VICON SPREADER

TOPDRESSER 1800

TOPDRESSER 2500

PROPASSTM 200 TOPDRESSER

PRO FORCETM DEBRIS BLOWER

1/3 VERTICAL LIFT

HARD CAB

CAB SLIDING WINDOW DOOR

KIT

CAB SOLID WINDOW DOOR KIT

CAB REAR VIEW MIRROR KIT

CANOPY

FOLDING WINDSHIELD

BRAKE & SIGNAL KIT

WORK LIGHT KIT

ROPS SIGNAL LIGHT KIT

AUTOMATIC TAILGATE RELEASE

REAR PTO KIT

HAND THROTTLE

SPARK ARRESTOR

PLASTIC BED LINER

HIGH AIR INTAKE KIT

REAR VIEW MIRROR KIT

Workman® HD Series Specifications*

(continued)

WORKMAN VEHICLE ACCESSORIES

Welded steel diamond plate flat bed that mounts to vehicle frame. Dimensions: 54.7 x 64.5 in (139 x 164 cm). Weight: 218 lbs (99 kg).

Long bed side panels, front panel and tailgate with a fixed pivot.

Welded steel diamond plate flat bed. Has (4) corner stake pockets for enhancing specialty mount applications. Dimensions: 21.5 x 54.7 in (55 x 139 cm). Weight: 55 lbs (25 kg)

Formed 14-gauge steel stake sides for use with 1/3 flat bed.

Welded steel diamond plate flat bed. Dimensions: 48.1 x 54.7 in (122 x 139 cm). Weight: 161 lbs (73 kg)

Short bed side panels, front panel and tailgate with a fixed pivot for use with 2/3 flat bed. Optional tailgate release PN 92-1220.

Hinged side panels, front panel and tailgate can be folded down independently for use with full flat bed. Dimensions: 64.5 x 54.7 x 11 in (164 x 139 x 28 cm) outside. 20 cu ft (.570 cu m) capacity. Weight = 109 lbs (49 kg)

Provides 8 gpm (30.3 liter) at 2000 psi hydraulic flow in a separate circuit to power certain attachments and accessories (standard on TC models).

Note: Model 07369 cannot run High Flow Hydraulics Kit.

200 gallon (757 liter) low profile tank sprayer with diaphragm pump and detatchable control box. Three-section, 18.5 ft (5.6 m) open boom system.

Pendulum action spreader with polyester hopper. 14.1 cu. ft. (.396 cu. m.), 750 lbs (340.5 kg) capacity. Spread width is 3 - 46 ft. (1 - 14 m).

18 cu. ft. (.504 cu. m), 1450 lbs (541 kg) capacity conveyor belt style topdresser hydraulically driven by remote hydraulics. 60 in (152 cm) spread width. Workman bed lift cylinders raise topdresser. Spring load metering gate.

25 cu. ft. (.7 cu. m) capacity conveyor belt style topdresser towed by Workman vehicle. Textured belt, oscillating axles and all wheel drive. Electrically activated hydraulic brakes.

21 cu. ft. / 0.54 cu. m) struck (25 cu. ft. / 0.71 cu. mheaped) capacity spin style topdresser. Tow-behind or bed mount versions.

Tow-behind, self-contained engine-driven debris blower operated with a hand-held wireless RF controller. Bed mount kit available.

An elevating, scissor-lift work platform with 600 lb (272 kg) lift capacity that can be raised from 38 in (96.5 cm) to 98 in (249 cm). Slope indicator for safe operation. Removable over-ride key for lift controls.

Deluxe hard cab, ROPS and CE certified. Vented front glass windshield, interior dome light and a 2-speed windshield wiper. Optional heater and mirrors available.

Door kit for deluxe hard cab. Operator door has a sliding window for ventilation and ability to access exterior elements such as an identification badge security entry. Passenger door has solid window.

Door kit for deluxe hard cab. Operator and passenger doors have solid windows.

Externally mounted to the cab frame, operator and passenger side rear view mirrors for enhancing all around visibility.

Durable, high-density polyethylene canopy with drainage outlets for moisture runoff.

Clear high-impact modified acrylic material with fold down capability.

Consists of turn signal lights for both corners in the front and rear of vehicle and brighter beam headlights.

Consists of (2) front facing and (1) rear facing work lights all mounted on top of ROPS bar.

Consists of (2) double amber warning lights and (2) single red tail lights all for mounting on top of ROPS bar. Requires either a “Right Side” or “Left Side” light kit.

Provides automatic tailgate release when dumping from cargo bed and resets automatically upon lowering of bed. Works on full or 2/3 bed with full sides. Does not work with folding side kit.

Rear mounted, 540 RPM, PTO shaft mechanically driven by transaxle.

Throttle and speed limit control that provides constant RPM for stationary attachments or a controlled maximum speed for applications such as spraying or spreading (mechanical – HDX/HD & electric – HDX gas models).

Fits onto end of tailpipe.

A rugged, weatherproof one-piece plastic liner and separate tailgate liner that will protect either a full are bed with sides or a 2/3 bed with sides.

Kit for extending the air intake system from underneath the cargo bed to a position slightly above the ROPS shield behind the passenger position of the vehicle. Recommended for dusty work applications.

A single 8 1/2” (21.6 cm) convex mirror with mounting capability on either the operator or passenger side of the vehicle.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual Products offered

for sale may vary in use, design, requirements and safety features. Consult your local Toro Distributor. “Cushman” is a registered trademark of Ransomes.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

The Workman HD utility vehicle is manufactured in Tomah, WI ISO 9002 Certified Plant.

2” RECEIVER HITCH KIT

TRAILER BRAKE

WIRING KIT

TRAILER SIGNAL

WIRING KIT

REMOTE HYDRAULIC MANIFOLD KIT

REMOTE HYDRAULIC FLOAT KIT

4WD MANUAL CONTROL

4 POST ROPS CANOPY KIT

4 POST ROPS KIT

HEATER KIT

BACK UP ALARM KIT

Workman® HD Series Specifications* (continued)

WORKMAN VEHICLE ACCESSORIES

Provides a 2” square receiver to enable a “drawbar” hitch.

Kit provides a controller which plugs into Workman vehicle and a positive wire to assist the hook up of customer supplied electric trailer brakes.

Kit provides electrical wire for Workman vehicle to enable easy hook up to customer supplied trailer signal and brake lights.

Hydraulic manifold kit that provides to ability to switch hydraulics between cargo bed actuation and remote port usage via use of a opertor panel mounted switch.

Hydraulic float kit that enables both hydraulic lifting and “float” in the down position. Required when using a Deere TC125 sweeper.

Allows auto 4WD to be turned off.

Canopy for use with 4-post ROPS kit.

Connects standard 2-post ROPS to 4-post ROPS. Required with 200-gallon sprayer.

Heater for use with cab. Adjustable temperature and 2-speed fan (excludes HD).

Provides an audible alarm when vehicle is in reverse.

Multi Pro

SOLUTION TANK

RATED CAPACITY

SPRAY PUMP

AGITATOR

CONTROLS

BOOM ASSEMBLY

BOOM ACTUATORS

SPRAY NOZZLES

CLEANLOADTM EDUCTOR KIT

FRESH WATER RINSE KIT

ELECTRIC HOSE REEL KIT

PRO FOAMTM MARKING KIT

ULTRA SONIC BOOMTM KIT

COVERED BOOM KIT

AIR INDUCTION TURBO TWIN

JET NOZZLES

CONTACT & SYSTEMIC NOZZLES

WM – 200-Gallon Sprayer Specifications

SPRAYER SPECIFICATIONS

High-density, impact-resistant polyethylene with large 16” (41cm) fill well, tapered bottom and sump with drain.

200 gallons (757 liters).

Hardi 363/10.0, 6-diaphragm positive displacement w/1” (2.5cm) input shaft; input speed 0~540 rpm; Flow rate 49gpm (185.5 lpm) @ 40psi (540 rpm).

4, side- mounted jet agitation nozzles for full tank agitation.

Spray pump control switch, agitator jet switch, rate switch, individual boom On/Off switches, boom actuator switches, indicator lights on pump, agitation and boom switches, throttle lock.

OPEN BOOMS (STANDARD)

18.5’ three section, triangular truss style open booms.

Heavy Duty hydraulic lift actuators with nitro-steel plated shafts; 1-3/4” Bore x 10.06” Stroke.

Eleven nozzles turrets, triple turret mount, quick-disconnect with diaphragm check valves.

MULTI PRO WM ACCESSORIES

This on-board mixing station allows rapid and safe loading of any chemical without the need to first mix into a slurry Incorporates a built-in bottle wash nozzle and has an optional suction lance to pull in powdered or liquid products from their container. Stores within the width of the machine.

Simplifies and automates the triple-rinse process, saving hours and hours of clean up time.

150’ (45.7 m) of hose for hand or walk spraying applications. Convenient electric powered rewind. Spray gun has an adjustable nozzle from stream to fan.

Foam dollops ensure accurate parallel path tracking. Select foam independently or both simultaneously.

New sonar sensors automatically maintain proper spray height over undulating turf.

Extends 12” (30.5 cm) below the boom to minimize chemical drift in breezy conditions while retaining full boom system functionality.

Exclusive to Toro in the 0.8gpm (3.02 lpm), 1.0 gpm (3.79 lpm) and 1.5gpm (5.68 lpm) sizes, for exceptional contact coverage.

See complete nozzle listing in the Multi Pro Nozzle Selection Brochure – available for download on toro.com

WARNING

THE WORKMAN® IS AN OFF-HIGHWAY VEHICLE, AND IS

NOT DESIGNED, EQUIPPED, OR MANUFACTURED FOR USE ON PUBLIC STREETS, ROADS OR HIGHWAYS.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual Products offered for sale

may vary in use, design, requirements and safety features. Consult your local Toro Distributor. “Cushman” is a registered trademark of Ransomes.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

The Workman utility vehicle is manufactured in Tomah, WI ISO 9002 Certified Plant.

ENGINE

DISPLACEMENT

FUEL

COOLING

TRANSMISSION

MAXIMUM SPEED

4WD MODEL

BASE MACHINE WEIGHT

(INCLUDES BED)

TOTAL PAYLOAD CAPACITY

(INCLUDING TWO, 200LB

PASSENGERS)

CARGO BED CAPACITY

(ASSUMES TWO, 200LB

PASSENGERS)

LENGTH

WIDTH

HEIGHT

CLEARANCE CIRCLE

GROUND CLEARANCE

DIFFERENTIAL LOCK

FRONT SUSPENSION

REAR SUSPENSION

BRAKES

CERTIFICATIONS

WARRANTY

TOW HITCH

Workman® HDX Auto Specifications

WORKMAN HDX AUTO, MODEL 07390 / 07390TC

28 hp (14.9 kW) Kohler® LH775 Twin-cylinder, liquid-cooled electronic fuel injection

747cc

Gasoline

Liquid

Variable speed transmission with forward high-low range and reverse featuring Toro SpeedContr'l™

Forward low range 11 mph (17.7 km/h), Forward high range 20 mph (32.2 km/h), Reverse 13 mph (20.9 km/h)

Fully automatic on-demand, bi-directional system. Uses dual bi-directional clutches. In event of rear tire slippage, clutches transmit power proportionally to front wheel with highest traction.

HDX Auto 2WD: 1,905 lbs (866 kg) HDX Auto 4WD: 1,935 lbs (880 kg)

HDX Auto 2WD: 3,295 lbs (1498 kg) HDX Auto 4WD: 3,265 lbs (1484 kg)

HDX Auto 2WD: 2,895 lbs (1316 kg) HDX Auto 4WD: 2,865 lbs (1303 kg)

127.6” (324 cm) without bed; 130” (330 cm) with bed

64.7” (164.3 cm)

75.8” (192.5 cm) to top of ROPS

2WD Inside = 32” (81 cm); Outside = 194” (493 cm) 4WD Inside = 100” (254 cm); Outside = 300” (726 cm)

7” (18 cm) with no load

Electronic switch to engage rear differential lock

Independent suspension with dual A-frame control arms, dual coil springs and dual shock absorbers with anti-sway bar. Provides 5.75” (14.6 cm) travel.

DeDion rear axle (weight carrying axle) suspension independent of transaxle with dual leaf springs and dual shock absorbers. Provides 3” (7.6 cm) travel.

4-wheel hydraulic disc brake system

Certified to meet SAE J2258. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer. Certified to meet the CE Machinery Directive.

Two-year limited warranty. See Operator’s Manual for further details.

600 lbs (272 kg) tongue weight 3,500 lbs (1587 kg) trailer weight Trailers over 1,500 lbs (680 kg) require trailer brakes

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

The Workman HD utility vehicle is manufactured in Tomah, WI ISO 9002 Certified Plant.

FULL AREA FLAT BED

FULL FLAT BED SIDE KIT

1/3 FLAT BED

1/3 FLAT BED STAKE SIDE KIT

2/3 FLAT BED

2/3 FLAT BED SIDE KIT

FULL FLAT BED FOLD DOWN

SIDE KIT

HIGH FLOW HYDRAULICS KIT

200 GALLON SPRAYER

VICON SPREADER

TOPDRESSER 1800

TOPDRESSER 2500

PROPASSTM 200 TOPDRESSER

PRO FORCETM DEBRIS BLOWER

1/3 VERTICAL LIFT

HARD CAB

CAB SLIDING WINDOW DOOR KIT

CAB SOLID WINDOW DOOR KIT

CAB REAR VIEW MIRROR KIT

CANOPY

FOLDING WINDSHIELD

BRAKE & SIGNAL KIT

WORK LIGHT KIT

ROPS SIGNAL LIGHT KIT

AUTOMATIC TAILGATE RELEASE

HAND THROTTLE

SPARK ARRESTOR

PLASTIC BED LINER

HIGH AIR INTAKE KIT

REAR VIEW MIRROR KIT

Workman® HDX Auto Specifications* (continued)

WORKMAN HDX AUTO ACCESSORIES