Toro 41188 User Manual
Multi Pro® 1750
Toro’s 175-gallon dedicated vehicle sprayer is the culmination of hundreds of hours of insightful customer input.
This sprayer uses the advanced spray system design of Toro’s extremely successful Multi Pro 5800, 300-gallon sprayer,
combined with cutting-edge sprayer controls and productive vehicle features to create the most advanced, efficient
and accurate 175 gallon sprayer on the market. From aggressive agitation, faster response, consistent and accurate
application rates, and intuitive rate set up, to precise vehicle control, this sprayer has it all.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
131
ENGINE
TRACTION SYSTEM
GROUND SPEEDS
TIRES
BRAKES
MAIN FRAME
SUSPENSION
STEERING
GAUGES/INDICATORS
VEHICLE CONTROLS
SEAT
WEIGHT
DIMENSIONS
WARRANTY
SOLUTION TANK
RATED CAPACITY
SPRAY PUMP
AGITATOR
CONTROLS
Multi Pro® 1750 Specifications
*
MULTI PRO 1750, MODEL 41188
Kohler,® CH740 Command Series, twin-cylinder, air-cooled, 4-cycle, 27 hp (20 kW) gross.
Kanzaki / Tuff Torq 3-speed (forward). 1-speed (reverse), mechanical transaxle with differential lock.
Forward: 0 – 11.5 mph (0 – 18.5 kph). Reverse: 0 – 2.5 mph (0 – 4 kph).
Front: Kenda K404 smooth (treadless); 20x10-10. Rear: Kenda turf tread; 24x13-12.
Four wheel hydraulic disc, 2-piston calipers; Front: 7.5” (19 cm) diameter rotor Rear: 9.5” (24 cm) diameter rotor.
High-strength, formed steel rear frame channels welded to steel tubular crossmembers and upper/lower steel tubular structure, ROPS standard.
Front suspension – coil over shock; Rear suspension – rigid; rubber tires.
Fully hydraulic: steering wheel turns, lock to lock: 3.5
Multi-function display (Mini InfoCenterTM), Pressure Gauge, Mechanical Fuel Gauge.
Ignition key switch, Choke, Headlight Switch. Optional Wireless Hour Meter. Speed Lock.
Single, high back cushion seat standard with manual position adjustment w/seatbelts.
2200 lbs. (998 kg) shipping weight
Measurements with spray system: Length = 140” (3.56 m) (w/booms folded in cradles) Width = 70” (1.78 m) (w/booms folded in cradles)
Height = 97” (2.4 m) (w/booms folded in cradles)
Two-year limited warranty. Refer to Operator’s Manual for further details.
SPRAYER SPECIFICATIONS
High density, impact resistant polyethylene with large 16” (41cm) fill well; tapered bottom and sump with drain.
175 gallons (662 liters)
Hardi 363/5.5, 6-diaphragm positive displacement w/1” (2.5cm) input shaft; input speed 300~1150 rpm, Flow rate of 41gpm (155 lmp) @ 40psi (860 rpm).
3, side-mounted jet agitation nozzles for full tank agitation.
Spray pump control switch, agitator jet switch, rate switch, individual boom On/Off switches, boom actuator switches, indicator lights on pump, agitation and boom
switches, throttle lock.
BOOM ASSEMBLY
BOOM ACTUATORS
SPRAY NOZZLES
CLEANLOADTM EDUCTOR
FRESH WATER RINSE KIT
ELECTRIC HOSE REEL
PRO FOAMTM MARKING KIT
ULTRA SONIC BOOMTM KIT
COVERED BOOM KIT
AIR INDUCTION TURBO TWIN
JET NOZZLES
CONTACT & SYSTEMIC NOZZLES
OPEN BOOM (STANDARD)
18.5’ (5.6 m) three section, triangular truss-style open booms, expandable to 20.5' (6.3 m) with optional kit.
Heavy-duty hydraulic lift actuators with nitro-steel plated shafts; 1-3/4” (4.4 cm) Bore x 10.06” (25.6 cm) Stroke
Eleven nozzle turrets, triple turret-mount, quick-disconnect with diaphragm check valves. Twelve nozzle turrets with optional kit.
MULTI PRO 1750 ACCESSORIES
This on-board mixing station allows rapid and safe loading of any chemical without the need to first mix into a slurry. Incorporates a built-in bottle wash nozzle and
has an optional suction lance to pull in powered to liquid products from their container. Stores within the width of the spray vehicle.
Simplifies and automates the triple-rinse process, saving hours and hours of clean-up time.
150’ (45.7 m) of hose for hand or walk spraying applications. Convenient electric powered rewind. Spray gun has an adjustable nozzle from stream to fan.
Foam dollops ensure accurate parallel path tracking. Select foam for either boom or both.
New sonar sensors automatically maintain proper spray height over undulating turf.
Extends 12” (30.5 cm) below the boom to minimize chemical drift in breezy conditions while retaining full boom system functionality.
Exclusive to Toro in the 0.8 gpm (3.02 lpm), 1.0 gpm (3.79 lpm) and 1.5 gpm (5.68 lpm) sizes, for exceptional contact coverage.
See complete nozzle listing in the Multi Pro® Nozzle Selection Brochure – available for download on toro.com
A Safety Reminder: Prior to any application, know the chemical content and the manufacturer’s recommendation for protective clothing. Always wear
proper clothing and mask when applying chemicals.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
132
The Multi Pro 1750 is manufactured in
Tomah, WI ISO 9002 Certified Plant.
Loading...