Toro 38360 Parts Catalogue
Power Shovel
Plus
™
Ordering Replacement Parts
Model No. 38360 - 250000001 and up.
Form Number 3351-216 Rev B
Parts Catalog
To order replacement parts, please supply the part
number, the quantity, and the description of each
part desired.
Understanding Reference Numbers
Each Identified part in an illustration has a reference
number. The reference number for a part also
appears in the parts list, along with other information
about the part.
This catalog uses two special reference number
formats, one to indicate parts in a service assembly
and another to indicate the quantity of a given part in
an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers
in the form a:b. The a represents the reference
number of the entire service assembly and the b
represents a sequential number unique to each part
within the service assembly.
Register your product at www.Toro.com
All Rights Reserved
For example, a wheel assembly might be identified
by reference number 6, the tire by 6:1, the valve by
6:2, and the wheel by 6:3. When you order the
assembly identified by reference number 6, you
receive all parts identified by reference numbers 6:1,
6:2, and 6:3. However, you may also order any part
individually. Reference numbers of this type appear
in illustrations and in part lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates
more than one part, the reference number has the
form nX y. The n represents the quantity of the part,
the X is the multiplication symbol, and the y
represents the reference number.
For example, in an illustration, the reference number
2X 37 means that two of the parts identified by
reference number 37 are indicated.
2004©The Toro Company -
Contents
Description Page
. . . . . . 3Housing Assembly
. . . . . . 4Handle Assembly
Description Page
Part Description Abbreviations
Part descriptions in this catalog may include the following abbreviations.
AR. . . . . . . . . . . . . . . as required
ASM. . . . . . . . . . . . . . assembly
CARR. . . . . . . . . . . . carriage
DEG. . . . . . . . . . . . . . degrees
FH. . . . . . . . . . . . . . . flat head
GA. . . . . . . . . . . . . . . gauge
HF. . . . . . . . . . . . . . . hex flange
HH. . . . . . . . . . . . . . . hex head
HHF. . . . . . . . . . . . . . hex head flange
HHFTF. . . . . . . . . . . . hex head flange thread forming
HJ. . . . . . . . . . . . . . . hex jam
HLH. . . . . . . . . . . . . . hex lag head
HOC. . . . . . . . . . . . . . height-of-cut
HS. . . . . . . . . . . . . . . hex
HSBH. . . . . . . . . . . . . hex socket button head
HSFH. . . . . . . . . . . . . hex socket flat head
HSH. . . . . . . . . . . . . . hex socket head
HWH. . . . . . . . . . . . . hex washer head
HWHTF. . . . . . . . . . . hex washer head thread forming
HYD. . . . . . . . . . . . . . hydraulic
INC. . . . . . . . . . . . . . . incorporated
LH. . . . . . . . . . . . . . . left hand
NI. . . . . . . . . . . . . . . . nylon insert
NPTF. . . . . . . . . . . . . national pipe thread fine
PPH. . . . . . . . . . . . . . phillips pan head
PRH. . . . . . . . . . . . . . phillips round head
PTH. . . . . . . . . . . . . . phillips truss head
PTO. . . . . . . . . . . . . . power take off
RH. . . . . . . . . . . . . . . right hand
SFH. . . . . . . . . . . . . . slotted fillister head
SHH. . . . . . . . . . . . . . slotted hex head
SHWH. . . . . . . . . . . . slotted hex washer head
SPH. . . . . . . . . . . . . . slotted pan head
SQH. . . . . . . . . . . . . . square head
SRH. . . . . . . . . . . . . . slotted round head
STD. . . . . . . . . . . . . . standard
TAP. . . . . . . . . . . . . . self tapping
TTH. . . . . . . . . . . . . . torx truss head
WH. . . . . . . . . . . . . . .wing head
. . . . . . 5Rotor and Drive Assembly
Footnotes
Œ
Not serviced separately
2
3351-216 Rev B
Ref Part No. Qty. Description
Scraper-Snow11
106-9786
106-9798
32153-11
106-9787
106-9799
107-9975
106-9812
38-8211
3256-80
73-6570
3296-54
1
Rotor-Snow12
1
Nut-Lock13
1
Scraper-Right, Sweep14
1
Wheel-Sweep15
2
Screw-PPH16
1
Bushing-Wheel17
2
Pin-Rotor18
1
Washer-Flat19
1
Connector-Wire Nut20
2
Nut-Lock, NI24
2
Housing Assembly
3
Loading...