Toro 3100-D User Manual
F E A T U R E S
Reelmaster® 3100-D
with DPA Cutting Units
DPA Cutting Units
• Cast iron and cast aluminum
cutting unit frames provide
unmatched rigidity and consistency
for less frequent adjustments
• Precise DPA adjustment simplify
reel-to-reel consistency and setup
• EdgeMax
austempered hardened reel blades
provide longer edge retention and
improved wear life
Options Include:
• 68.6 cm and 81.3 cm (27” & 32”)
Cutting Unit widths
• 5, 8, and 11 blade options
• Rear roller brushers for
enhanced clipping dispersion.
• Grass baskets
®
bedknifes and
The Best Just Got Better!
Now the best triplex trim mower on the market just got better with
the addition of the legendary DPA (Dual Precision Adjustment) cutting
units. These proven cutting units deliver superior aftercut appearance,
increased adjustment retention and longer wear life. Combine that
with the unique features of the Reelmaster 3100-D with optional
Sidewinder™ technology and you have a mower whose versatility and
cutting quality is second to none.
Reelmaster® 3100 Specifications
REELMastER 3100-d, ModEL 03170 REELMastER 3100-d, ModEL 03171 w/sidEwindER
ENGINE
CONFIGURATION
FUEL CAPACITY
TRACTION DRIVE
GROUND SPEED
CONTROLS
GAUGES
ELECTRICAL & INTERLOCKS
FRAME
BRAKES
STEERING
OVERALL DIMENSIONS
SOUND LEVEL
SOUND PRESSURE LEVEL
VIBRATION LEVEL
CUTTING UNIT
CONFIGURATION
CUTTING UNIT OFFSET
CERTIFICATION
WARRANTY
Kubota® liquid-cooled diesel, 3-cylinder, 16 kW (21.5 hp) net @ 2500 RPM. 1123 cm3 (68.5 cu. in.) displacement. Pressurized
lubrication system with 3.3 liter (3.5 U.S. qt.) capacity. Heavy duty, radial seal air cleaner. Fuel/water separator with visible bowl.
Rear mounted engine, front operator position. Rear mounted radiator. Two post ROPS and seat belt standard.
28 liters (7.5 gallons). 2008 models Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petrol blend).
Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive
provides infinitely variable speed in forward and reverse. 23 liter (6 gallon) hydraulic system capacity.
Mow: 0-10 km/h (0-6 mph); Transport: 0-14 km/h (0-9 mph). Reverse: 0-6 km/h (0-4 mph).
Forward and reverse traction control pedals, mow/transport lever, hand activated park brake, ignition key switch, tilt steering wheel
lock, PTO switch, throttle, joystick control for cutting unit raise and lower (and for moving cutting units side-to-side on Sidewinder
equipped models), cutting unit transport lock, reel speed and backlap control knob.
Hour meter, fuel gauge, cluster gauge with glow plug and charge indicator lights, and low engine oil pressure and high coolant
temperature warning lights (high temperature safety shut off).
12-volt, 585 cold cranking amps at -18° C (0° F), 40 amps with regulator/rectifier. Traction pedal, operator presence in seat, PTO
engage or disengage, and cutting unit mow or transport safety interlock switches.
Front: 20 x 10-12, 4-ply Turf Trac. Rear: 20 x 12-10
TIRES
Formed steel, welded steel and steel tubing.
Hydrostatic service brake, parking brake.
Power steering with tilt steering wheel.
Track Width: 140 cm (55”) Overall Height: 180 cm (71”) with ROPS
Wheel Base: 142 cm (56”) Transport Width: 203 cm (80”) in 183 cm (72”) woc
234 cm (92”) in 216 cm (85”) woc
Overall Length: 248 cm (93”) Approx. Weight with Cutting units: 844 kg (1860 lbs.)
At Operator Ear: 82 dBA At 7.6 m (25’): 69 dBA At 15.2 m (50’): 64 dBA
96 dBA per ISO 11094 [uncertainty value (k) = 1 dBA]
0.49 m/sec2 per EN 836
Fixed position cutting units.
7.6 cm (3”) in 183 cm (72”) width of cut
25 cm (10”) in 216 cm (85”) width of cut
This product complies with the American National Standards Institute (ANSI B71-4 – 1999) and European Community specifications
(CE Certified).
Two-year limited warranty, refer to operators manual for details.
Operator controlled moveable cutting units travel ± 30 cm (12”) left or
right from center; total of 61 cm (24”) of infinite variability.
Maximum 38 cm (15”) in 183 cm (72”) width of cut.
Maximum 56 cm (22”) in 216 cm (85”) width of cut.
dpa cutting units: 5 BLADE DPA 69 CM (27”) 03180; 8 BLADE DPA 69 CM (27”) 03181; 11 BLADE DPA 69 CM (27”) 03183; 8 BLADE DPA 81 CM (32”) 03182
Three hydraulically driven, balanced, 17.8 cm (7”) diameter reels. Cutting units interchangeable to all three positions.
TYPE
REEL BL ADE OPTIONS
HOC RANGE
CUTTING WIDTH
CLIP FREQUENCY/BACKLAPPING
BEDKNIFE TO REEL ADJUSTMENT
ROLLERS
5, 8, and 11-blade reels available for 68.6 cm (27”) cutting unit. 8 blade reels available for 81.3 cm (32”) cutting unit.
Height of cut ranges 9.5 - 44 mm (.375” to 1.75”) standard in floating position, 13 - 67 mm (.5” to 2.625”) in fixed position.
Maximum 7.6 cm (3”) height of cut (approximate) in floating position when configured with heavy duty Wiehle
optional front roller brackets.
183 cm (72”), or 216 cm (85”) width of cut dependent on cutting unit selection.
Manually controlled variable reel speed for adjustment of clip frequency. Standard on-board backlapping.
Dual Point Adjustment (DPA) bedknife to reel.
Full roller standard on rear of cutting unit. Front roller options: full, Wiehle, sectional, or anti-scalp (for fixed position cutting units).
®
roller and
dpa cutting unit options
VERTICUTTING REEL
BEDKNIVES
REAR ROLLER
BRUSH
BIMINI CANVAS
03184 Verti-Cutting Reel 69 cm (27”) (for DPA CU)
114-9388 69 cm (27”) Standard Bedknife (Production) 114-9389 81 cm (32”) Standard Bedknife (Production)
112-8910 69 cm (27”) EdgeMax™ Bedknife 112-8956 81 cm (32”) EdgeMax™ Bedknife
114-9390 69 cm (27”) Heavy-Duty Bedknife 114-9391 81 cm (32”) Heavy-Duty Bedknife
119-0618 69 cm (27”) Extended Low Height of Cut Bedknife 119-0619 81 cm (32”) Extended Low Height of Cut Bedknife
03186 RM3100 69 cm (27”) Rear Roller Brush Kit
03187 RM3100 81 cm (32”) Rear Roller Brush Kit
Model 30358
Products depicted in this brochure are for demonstration purposes only. *Specifications and design subject to change
without notice. The Reelmaster 3100-D is manufactured in Tomah, WI ISO 9002 Certified Plant. Actual products offered
for sale may vary.
©2010 The Toro Company, 8111 Lyndale Ave. S., Bloomington, MN 55420-1196
gB Part No. 200-4430. Printed in U.S.A. www.toro.com
Loading...