Toro 30163 Parts Catalogue
Form No. 3322–943
Striping Kit
for 62” and 72” Z–Master Cutting Units
Model No. 30163
Parts Catalog
Ordering Replacement Parts
To order replacement parts, please supply: the part
number, the quantity, and the description of each
part desired.
Understanding Reference Numbers
Each identified part in an illustration has a reference
number. The reference number for a part also appears in
the parts list, along with other information about the part.
This catalog uses two special reference number formats,
one to indicate parts in a service assembly and another
to indicate the quantity of a given part in an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in
the form a:b.
the entire service assembly and the b represents a
sequential number unique to each part within the service
assembly.
The a represents the reference number of
The TORO Company — 1999
All Rights Reserved
For example, a wheel assembly might be identified by
reference number 6, the tire by 6:1, the valve by 6:2,
and the wheel by 6:3. When you order the assembly
identified by reference number 6, you receive all parts
identified by reference numbers 6:1, 6:2, and 6:3.
However, you may also order any part individually.
Reference numbers of this type appear in illustrations
and in part lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more
than one part, the reference number has the form nX y.
The n represents the quantity of the part, the X is the
multiplication symbol, and the y represents the reference
number.
For example, in an illustration, the reference number
2X 37 means that two of the parts identified by reference
number 37 are indicated.
3322–943
Ref. No.
Part No.
Qty.
1 100–3250 8 Bracket–Mounting
2 100–3260 1 Wiper
3 3290–496 8 Nut–Retainer
4 322–3 16 Screw–HH
5 3296–29 8 Nut–Hex
6 3256–57 8 Washer–Flat
Strip Assembly
Description
Lock
Ref. No.
Part No.
Qty.
C–2837
Description
2
Loading...