Form No. 3326–238 Rev A
36 in./44 in./52 in./62 in. Steel Bag
(3.5bu.)
Floating Deck Mid–Size Mower and Z–Master
100/200 Series with Mounting Plate Attachment
Model No. 30107—210000001 and Up
Operator’s Manual
Language Name (Language Abbreviation)
Contents
Operation
Page
Introduction 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Grass Basket 2. . . . . . . . . . . . . . . . . . .
Removing the Grass Catcher 3. . . . . . . . . . . . . . . . .
Emptying the Grass Basket 3. . . . . . . . . . . . . . . . . .
Clearing Obstructions 3. . . . . . . . . . . . . . . . . . . . . . .
Operating Tips 3. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inspecting the Grass Catcher 4. . . . . . . . . . . . . . . . .
Inspecting the Mower Blades 4. . . . . . . . . . . . . . . . .
Cleaning the Grass Catcher 4. . . . . . . . . . . . . . . . . .
Storing the Grass Catcher 4. . . . . . . . . . . . . . . . . . . .
Introduction
Read this manual carefully to learn how to operate and
maintain your product properly. The information in this
manual can help you and others avoid injury and product
damage. Although Toro designs and produces safe
products, you are responsible for operating the product
properly and safely.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model and
serial numbers of your product ready. Figure NO TAG
illustrates the location of the model and serial numbers on
the product.
Note: Determine the left and right sides of the machine
from the normal operating position.
Warning
To avoid personal injury, follow these procedures:
• Become familiar with all operating and safety
instructions in the operator’s manual for your
tractor and mower before using this attachment.
• Never remove the bagger or bagger door while
the engine is running.
• Always shut the engine off and wait for all
moving parts to stop before clearing an
obstruction from the bagging system.
• Never do maintenance or repairs while the
engine is running.
Installing the Grass Basket
1. Lift the grass deflector all the way up.
2. Position the front hook, on the side of the grass basket,
into the front slot on the mounting bracket (Fig. 1).
3. Place the rear hook onto the mounting bracket (Fig. 1).
4. Place the bottom corners of the grass basket door into
the slots on the grass basket. Secure the door with the
latch on top of the grass basket (Fig. 1).
This manual identifies potential hazards and has special
safety messages that help you and others avoid personal
injury and even death. Danger, Warning, and Caution are
signal words used to identify the level of hazard. However,
regardless of the hazard, be extremely careful.
Danger signals an extreme hazard that will cause serious
injury or death if you do not follow the recommended
precautions.
Warning signals a hazard that may cause serious injury or
death if you do not follow the recommended precautions.
Caution signals a hazard that may cause minor or moderate
injury if you do not follow the recommended precautions.
This manual uses two other words to highlight information.
Important calls attention to special mechanical
information and Note: emphasizes general information
worthy of special attention.
2001 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
All Rights Reserved
Printed in the USA
2
8
1
2
Emptying the Grass Basket
1. Disengage the power take off (PTO) to stop the mower
blades and release the traction drive or shift to neutral
as applicable for your mower.
2. Remove and empty the grass basket.
6
3
5
4
1. Grass Basket Door
2. Grass Basket
3. Front hook
4. Mounting bracket
Figure 1
5. Front slot
6. Rear hook
7. Slot
8. Latch
7
Removing the Grass Catcher
Warning
m–5392
3. Reinstall the grass basket and resume operation.
Clearing Obstructions
1. Disengage the power take off (PTO), park machine and
turn the ignition key to “OFF” to stop the engine.
Remove the key.
2. Remove the grass basket and empty it.
3. Carefully remove and clear the obstruction from the
mower.
4. Reinstall the grass basket and resume operation.
Operating Tips
1. Remember that the mower is wider with the grass
catcher installed. By turning too sharply in confined
places you may damage the grass catcher.
2. Do not trim with the right side of the mower because
you could damage the grass catcher.
3. When mowing rough or uneven terrain, use care to
avoid damaging the grass catcher against turf.
Without the grass deflector, bagger door or
complete grass catcher assembly mounted in place,
you and others are exposed to blade contact and
thrown debris. Contact with the rotating mower
blade(s) and thrown debris will cause injury or
death.
• Never remove the grass deflector from the
mower because the grass deflector routes
material down toward the turf. If the grass
deflector is ever damaged, replace it
immediately.
• Never put your hands or feet under the mower.
• Never try to clear the discharge area or mower
blades unless you move the power take off
(PTO) to Off and rotate the ignition key to Off.
Also remove the key and pull the wire off of the
spark plug(s).
1. Remove and empty the grass basket.
2. Lower the grass deflector back into place.
4. Air flow is required to cut grass and propel it into the
basket. Setting the height–of–cut too low, especially in
heavy or long grass, can restrict the air flow and plug
the mower or grass catcher.
5. To avoid plugging, double–cut the grass, first at a high
height–of–cut and then lower the mower to the desired
setting. Also, try to leave one side of the mower out of
the uncut grass, allowing air to be drawn into the
mower housing.
Maintenance
Inspecting the Grass Catcher
Inspect the grass catcher after the first ten hours of
operation and monthly thereafter.
1. Check the grass basket and door for damage. Replace
any damaged parts.
2. Tighten all nuts, bolts and screws.
3
Inspecting the Mower Blades
1. Inspect the mower blades regularly and whenever a
blade strikes a foreign object.
2. If blades are badly worn or damaged, install new blades.
Refer to your mower operator’s manual for complete
blade maintenance.
Cleaning the Grass Catcher
1. Frequently clean the inside and outside of the mounting
bracket, grass basket, door, and the mower, using water
sprayed from a hose. Use a mild automotive detergent
to remove stubborn dirt.
2. Ensure you remove matted grass from all parts.
3. After washing let all parts dry thoroughly.
Storing the Grass Catcher
1. Clean the grass catcher (refer to Cleaning the Grass
Catcher, page 4).
2. Inspect the grass catcher for damage (refer to Inspecting
the Bagger, page 3).
3. Ensure the grass basket is empty and dry.
4. Store the grass catcher in a clean, dry place, out of
direct sunlight. This extends the life of the grass catcher.
If you must store the grass catcher outside, cover it with
a weatherproof cover.
4
Loading...