Toro 22472 Operator's Manual

Trench Filler

for Compact Utility Loaders

Model No. 22472—260000001 and Up

Form No. 3353-608 Rev A

Operator’s Manual

Original Instructions (EN)Register your product at www.Toro.com

Contents

Introduction 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General Trench Filler Safety 3. . . . . . . . . . . . . . . .

Toro Trench Filler Safety 4. . . . . . . . . . . . . . . . . . .

Safety Decals 5. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Overview 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stability Ratings 6. . . . . . . . . . . . . . . . . . . . . . . . . .

Operation 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the Trench Filler 6. . . . . . . . . . . . . . . . . . . .

Tips for Trench Filling 7. . . . . . . . . . . . . . . . . . . . .

Transporting the Trench Filler on a Trailer 7. . . . .

Maintenance 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Recommended Maintenance Schedule 7. . . . . . . .

Adjusting the Skids 8. . . . . . . . . . . . . . . . . . . . . . .

Greasing the Bearing 8. . . . . . . . . . . . . . . . . . . . . .

Storage 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction

Write the product model and serial numbers in the space below:

Page

Model No.

Serial No.

This manual identifies potential hazards and has special safety messages that help you and others avoid personal injury and even death. Danger, Warning, and Caution are signal words used to identify the level of hazard. However, regardless of the hazard, be extremely careful.

Danger signals an extreme hazard that will cause serious injury or death if you do not follow the recommended precautions.

Warning signals a hazard that may cause serious injury or death if you do not follow the recommended precautions.

Caution signals a hazard that may cause minor or moderate injury if you do not follow the recommended precautions.

This manual uses 2 other words to highlight information.

Important calls attention to special mechanical

information and Note: emphasizes general information worthy of special attention.

Read this manual carefully to learn how to operate and maintain your product properly. The information in this manual can help you and others avoid injury and product damage. Although Toro designs and produces safe products, you are responsible for operating the product properly and safely.

You may contact Toro directly at www.Toro.com for product and accessory information, help finding a dealer, or to register your product.

Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 illustrates the location of the model and serial numbers on the product.

Safety

To ensure maximum safety and best performance, and to gain knowledge of the product, it is essential that you and any other operator of the product read and understand the contents of this manual before the engine is ever started.

This is the safety alert symbol. It is used to alert

you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Improperly using or maintaining this product could result in injury or death. To reduce this potential, comply with the following safety instructions.

Warning

The loader arms may lower when in the raised position after stopping the engine, crushing anyone under them.

Lower the loader arms before stopping the engine.

Figure 1

1. Model and serial number plate

W 2006 by The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420-1196

Printed in the USA

Warning

If you do not fully seat the quick-attach pins through the attachment mount plate, the attachment could fall off of the traction unit, crushing you or bystanders.

• Ensure that the quick-attach pins are fully seated in the attachment mount plate.

• Ensure that the attachment mount plate is free of any dirt or debris that may hinder the connection of the traction unit to the attachment.

• Refer to your traction unit Operator’s Manual for information on safely connecting an attachment to your traction unit.

Danger

When the trench filler is in operation, the rollers in the float guide move and can injure hands and feet.

• Stay behind the handles while operating the trench filler.

• Keep face, hands, feet, and any other part of your body or clothing away from moving parts.

Hydraulic fluid escaping under pressure can penetrate the skin and cause injury. Fluid injected into the skin must be surgically removed within a few hours by a doctor familiar with this form of injury or gangrene may result.

• Keep your body and hands away from pin hole leaks or nozzles that eject high pressure hydraulic fluid.

• Use cardboard or paper to find hydraulic leaks; never use your hands.

Caution

Hydraulic couplers, hydraulic lines and valves, and hydraulic fluid may be hot. If you contact hot components, you may be burned.

• Wear gloves when operating the hydraulic couplers.

• Allow the traction unit to cool before touching hydraulic components.

• Do not touch hydraulic fluid spills.

Danger

When the trench filler is in operation, the auger can be rotating and cut off or injure hands and feet.

• Before adjusting, cleaning, repairing and inspecting the trench filler, move the auxiliary

hydraulics lever to the off position, stop the engine, and wait for all moving parts to stop.

Remove the key.

• Stay behind the handles while operating the trench filler.

• Keep face, hands, feet, and any other part of your body or clothing away from moving or rotating parts.

General Trench Filler Safety

The following instructions have been adapted from the ANSI/OPEI and ISO standards.

Preparation

• Never attempt to make any adjustments while the engine is running, except when specifically recommended by Toro.

• The operation of any powered machine can result in foreign objects being thrown into the eyes. Always wear safety glasses or eye shields during operation or while performing an adjustment or repair.

Operation

• Do not put hands or feet near or under rotating parts.

• Exercise extreme caution when operating on or

crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

• After striking a foreign object, stop the engine, cycle the auxiliary hydraulics lever, disconnect the hydraulic lines, thoroughly inspect the trench filler for any damage, and repair the damage before restarting and operating the trench filler.

+ 5 hidden pages