Toro 131-5305 Installation Instructions

RearPivotArmKit

Heavy-DutyRecycler

ModelNo.131-5305

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Important:Savethepartsthatyouremovefromthe machineexceptthosethatyouareinstructedtodiscard.

1.Removetheangenutandthewheelfromthemachine (Figure1).

/RearBaggerLawnMower

WARNING

CALIFORNIA

Proposition65Warning

FormNo.3394-373RevA

InstallationInstructions

Figure1

1.Wheel2.Flangenut

2.Removetheretainingringsandthepiniongearfrom themachine(Figure2).

Registeratwww.T oro.com.

Figure2

1.Bolts(1/4x3/4inch)

2.Piniongear

3.Retainingrings

3.Removethe3bolts(1/4x3/4inch)thatsecurethe height-of-cutassemblytothemachine(Figure2).

4.Removetheheight-of-cutassemblyfromthemachine.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3394-373*A

5.Removetheretainercover,retainingring,andwasher fromtheheight-of-cutplate(Figure3).

Figure5

Figure3

1.Retainercover

2.Retainingring

3.Washer

4.Endofretainer

5.Height-of-cutplate

6.Disassembletheremainingpartsoftheassembly (Figure4).

Note:Discardtheheight-of-cutplate,rearpivotplate, bolt(5/16x3/4inch),andBellevillewasher.

1.Height-of-cutplate(from thekit)

2.Bolt(3/8x2-3/4inches)

3.Rearpivotarm(fromthe kit)

4.Springarm

5.Retainer

6.Bolt—5/16x3/4inch(from thekit)

8.Installthewasher,retainingring,andretainercoveron theheight-of-cutplate(Figure3).

9.Installtheheight-of-cutassemblyontothemachine withthe3bolts(1/4x3/4inch)asshowninFigure6.

Note:T orquetheboltsto11to14N-m(100to120 in-lb).

Figure4

1.Height-of-cutplate (discard)

2.Bolt(3/8x2-3/4inches)

3.Bellevillewasher(discard)7.Bolt—5/16x3/4inch

4.Rearpivotarm(discard)

5.Springarm

6.Retainer

(discard)

7.Assemblethepartsfortheheight-of-cutassembly (Figure5)usingtheheight-of-cutplate,therearpivot plate,andthebolt(5/16x3/4inch)fromthekit.

Note:Torquethebolt(5/16x3/4inch)to20to23 N-m(180to200in-lb).

Figure6

10.Installthepiniongearwiththeretainingrings(Figure

2).

11.Securethewheeltothemachinewiththeangenut (Figure1).

Note:Torquetheangenutto28to45N-m(250 to400in-lb).

12.Repeatthisprocedurefortheotherrearwheel assembly.