Toro 131-5304 Installation Instructions

FrontPivotArmKit

Heavy-DutyRecycler

ModelNo.131-5304

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Important:Saveallthepartsthatyouremovefromthe machineinthisprocedureexceptthefrontpivotarm andthe2Bellevillewashers.

1.Removetheangenutandthewheelfromthemachine (Figure1).

/RearBaggerLawnMower

WARNING

CALIFORNIA

FormNo.3394-369RevA

InstallationInstructions

Figure1

1.Flangenut

2.Removethelocknutthatsecuresthespringarmand thefrontpivotarmtothemachine(Figure2).

Figure2

1.Axle

2.Bolt(3/8x2-3/4inches)

3.Bellevillewasher(discard)

4.Springarm

5.Frontpivotarm(discard)

6.Wheelspacer

7.Locknut

3.Removethewheelspacer,frontpivotarm,springarm, bolt(3/8x2-3/4inches),and2Bellevillewashers (Figure2).

4.Discardthefrontpivotarmandthe2Belleville washers.

5.Installthebolt(3/8x2-3/4inches)intothenewfront pivotarmfromtheinsideasshowninFigure3.

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3394-369*A

Figure3

1.Axle5.Wheelspacer

2.Bolt(3/8x2-3/4inches)

3.Springarm

4.Newfrontpivotarm

6.Locknut

7.Flangenut

6.Installthespringarmandthenewfrontpivotarm (withthebolt—3/8x2-3/4inches)andsecurethem withthelocknut(Figure3).

Note:T orquethelocknutto68to81N-m(50to60 ft-lb).

7.Installthewheelspacerandwheelontothemachine andsecurethemwiththeangenut(Figure3).

Note:Torquetheangenutto28to45N-m(250 to400in-lb).

8.Repeatthisprocedurefortheotherfrontwheel assembly.