Toro 121-6039 Installation Instructions
TrashBagKit
GrandStand
ModelNo.121-6039
FormNo.3375-669RevA
®
Mower
InstallationInstructions
Thiskitcanbeinstalledoneithersideofthemachine.
InstallingitontheleftsideallowsforinstallationoftheChute
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Bracket1
1
2
3
Thread-formingbolt(3/8x1inch)
Cupholder
Bolt(#10x5/8inch)
FlatWasher2
Locknut(#10)
Trashbag1Installthetrashbag
1
InstallingtheBrackettothe
GateKitontherightside.Twokitscanbeinstalled,oneon
theleftandoneontheright.
Qty.
2
1
2
2
Installthebagbrackettothemower
Installthecupholder
Use
Mower
Partsneededforthisprocedure:
1Bracket
2
Thread-formingbolt(3/8x1inch)
Procedure
Installthebrackettothesideofthemachinewith2
thread-formingbolts(3/8x1inch).
Figure1
1.Leftsideofmachine3.Thread-formingbolt,(3/8x
1inch)
2.Bracket
©2012—TheT oro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3375-669*A
2
3
InstallingtheCupHolder
Partsneededforthisprocedure:
1
Cupholder
2
Bolt(#10x5/8inch)
2FlatWasher
2
Locknut(#10)
Procedure
Installthecupholdertothebagbracketwith2bolts(#10
x5/8inch),2washers,and2locknuts(#10)(Figure2).
Positionthewashersbetweenthebracketandthebolts.
InstallingtheTrashBag
Partsneededforthisprocedure:
1Trashbag
Procedure
Installthetrashbagintotheslotsinthebagbracket(Figure3).
Figure2
1.Bolt(#10x5/8)4.Cupholder
2.Flatwasher
3.Bracket
5.Locknut(#10)
Figure3
1.Bracket2.Trashbag
2
Loading...