Toro 120-7780 Installation Instructions

Download

Page 1

FormNo.3368-782RevA

BeltGuardKit

TimeCutter

ModelNo.120-7780

Donotsupplytheseinstructionstothecustomer.

TheseinstructionsareforadealertoinstalladditionalbeltguardsonunitssoldinFrance.

ZS4200RidingMower

InstallationInstructions

Safety

SafetyandInstructional Decals

Safetydecalsandinstructionsareeasily visibletotheoperatorandarelocated nearanyareaofpotentialdanger. Replaceanydecalthatisdamagedor lost.

120-1119

1.Firehazard—readtheOperator’sManual.

Installation

PreparingforInstallation

NoPartsRequired

Procedure

Important:Refertothe

areunfamiliarwiththespecicsofoperatingthis machinebeforeproceeding.Themanualcontains importantinformationaboutsafelyoperatingthe machine.Ifyoudonotknowthisinformation,you couldseriouslyinjureyourselforothers.

1.Parkthemachineonalevel,smoothsurfacewith sufcientspacetoaccessbothsidesofthemowing deck.

WARNING

Operator’ s Man ual

ifyou

Registeratwww.T oro.com.

Beforeworkingonthemachine,stoptheengine, settheparkingbrake,removetheignitionkey, anddisconnectthesparkplugwire.

CAUTION

Ifyouleavethekeyintheignitionswitch, someonecouldaccidentlystarttheengineand seriouslyinjureyouorotherbystanders.

Removethekeyfromtheignitionanddisconnect thewirefromthesparkplugbeforeyoudoany maintenance.Setthewireasidesothatitdoes notaccidentallycontactthesparkplug.

2.Checktheloosepartsbagandverifythatitcontains allthepartslistedinthisdocument.

3.Removethemowingdeckandslideitoutfrom underthetractionunit;refertotheOperator’sManual forthismachine.

OriginalInstructions(EN)

AllRightsReserved

Page 2

AssemblingtheDeckBelt Guard

Partsneededforthisprocedure:

Leftdeckguardplate

1Rightdeckguardplate

1Deckguardcover

HexBolt(M6-1X16)

Locknut(NIM6-1)

Procedure

Assembletheleftandrightdeckguardplatesandthe anddeckguardcoverasshowninFigure1.

Figure2

1.Bolt,existing3.Nut,existing

2.Washer,existing

2.Removetheexistingbolt,washerandnutshownin Figure2andsetthemaside.

3.Mounttheassembleddeckbeltguardontothedeck.

A.Attachthetabatthefrontoftheguardtothe

deckusingtheexistingbolt,washerandnutthat youjustsetaside;seeFigure3.

4.Flangenut,existing(2)

Figure1

1.Rightdeckguardplate

2.Locknut(NIM6-1)(6)

3.Leftdeckguardplate

4.HexBolt(M6-1X16)(6)

5.Deckguardcover

InstallingtheDeckBeltGuard

NoPartsRequired

Procedure

1.Loosen,butdonotremove,theangenutonthe outsideofeachsuspensionbracketontherearofthe deck;seeFigure2.

Figure3

1.Washer,existing

2.Nut,existing6.Bolt,existing

3.Deckbeltguard7.Tab

4.Rearslots,pair

B.Foreachsideoftheassembledguard,insertthe

previouslyloosenedangenutthroughthelarge openingneartherearoftheguard(Figure3).

Note:Usetheslotineachsideguardthatbest alignstheholeinthetabwiththeholeinthe deck.

C.Insertthepreviouslyremovedboltupthrough

theholesinboththedeckandthetaband securelyfastenthewasherandnuttoit.

D.Tightenbothangenutssecurely .

4.Verifythattheguardisclearofallmovingparts acrosstheirfullrangeofoperation,thatitwillnot causedamagetowires,hosesorothercomponents

5.Flangenut,existing(2)

Page 3

andthatitwillnotinterferewiththesafeoperation ofthecuttingdeck.

AttachingtheDeck

NoPartsRequired

Procedure

1.Slidethedeckbackunderthemachine,mountitto thetractionunitandadjustitasdescribedinthe Operator’sManualforthismachine.

2.Verifythatthebeltguardsareclearofallmoving partsacrosstheirfullrangeofoperation,that theywillnotcausedamagetowires,hosesorother componentsandthattheywillnotinterferewiththe safeoperationofthemowingdeckandthetraction unit.

Page 4