Toro 110-6902 Installation Instructions
Form No. 3354-605 Rev A
Plate Kit
For 40in Turbo Force® Cuttng Unit for Mid-Size
Mowers
Model No. 110-6902
Installation Instructions
Note: Deter mine the left and right sides of the mac hine from the nor mal operating position.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
1
2
No parts required
Plate
Bolt, (5/16 x 1 inch)
Lock nut, (5/16 inch)
Curved washer, (5/16 inch)
Description
Step
1
Preparing the Mower
No Parts Required
Procedure
1. T horoughly clean mo w er dec k. All debris m ust
be remo v ed to ensure the plate will fit properly
ag ainst the mo w er dec k.
2. R e pair all bent or damag ed areas of the mo w er
dec k and re place any missing par ts .
Qty.
–
1
2
2
2
Prepare the mower.
Install the plate.
Use
Step
2
Installing the Plate
Parts needed for this step:
1
Plate
2
Bolt, (5/16 x 1 inch)
2
Lock nut, (5/16 inch)
2
Curved washer, (5/16 inch)
Procedure
Install the plate on top of the front lip at the left
cor ner with 2 bolts (5/16 x 1 inc h), 2 cur v ed
w ashers (5/16 inc h) and 2 n uts (5/16 inc h) ( Figure
1 ).
© 2005—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Note: Ensure the plate is installed as sho wn in
Figure 1 .
Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved
1. Mower deck
2. Nut, (5/16 inch)
Figure 1
3. Curved washer, (5/16 inch) 5. Bolt, (5/16 x 1 inch)
4. Plate
2
Loading...