Toro 110-6506 Installation Instructions
French Decal Kit
For TimeCutter Z Riding Mowers
Model No. 110-6506
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Form No. 3354-294 Rev A
Installation Instructions
Step
1
Note: Visit www .T oro .com and do wnload the F renc h Operator’ s Manual that cor responds to the model
and serial n umber of the product this kit is installed on.
Decals
Description
Qty.
6
Install the decals.
Use
Step
1
Installing the Decals
Parts needed for this step:
6
Decals
Procedure
Install the decals in the positions indicated in the
table belo w . Place eac h F renc h decal directly o v er
the cor responding US English decal.
Install eac h decal as follo ws:
1. T horoughly clean the area where y ou will
install the decal.
2. Dampen the area with w ater or mildly soapy
w ater .
3. P eel the decal from the bac king and install it
in place .
4. Squeeg ee across the surface of the decal,
star ting at the center of the decal and w orking
to w ard the edg es , using o v erlapping strok es .
© 2005—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved
Location US English
On right-hand
top of mower
deck
92–7109
On the top of
the left side of
the mower deck,
remove 92–7108
and then apply
93–7317.
92–7108
On the front of
the right side of
the mower deck,
remove 98–3798
and then apply
99–8939.
French
93–7009
93–7317
On right-hand
top of mower
deck
Under seat base
98–3798
92–1122
106–8716 106–8717
99–8939
110–1868
2
On console
107–7398 (English)
107–2514 (French)
3
Loading...