Toro 107-3699 Installation Instructions

Form No. 3350–964
CE Decal Kit
Part No. 107–3699
Installation Instructions
Installing the Decals
Install the decals in the positions indicated in the table and graphics below. Place each International decal directly over the corresponding US English decal.
Install each decal as follows:
1. Thoroughly clean the area where you will install the
decal.
2. Dampen the area with water or mildly soapy water.
3. Peel the decal from the backing and install it in place.
4. Squeegee across the surface of the decal, starting at the
center of the decal and working toward the edges, using overlapping strokes.
Installing the Sound Decal on the Mower Deck
Note: Refer to the tables for the specific decal and location to put on the correct mower deck. The 105 dB decal goes on the 132cm mower and the 100 dB decal goes on the 107cm mower.
Install the sound decal to the mower deck as shown in Figures 1 and 2.
Installing the Decals on a 132cm Mower
10mm
5
13mm
654
3
1. Sound decal, 105–4674
2. Decal, 107–8456
2003 by The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420-1196
132cm Side Discharge Mower Deck
3. Decal, 107–9200
4. Decal, 93–7009
1
2
Figure 1
5. Decal, 93–7317 6. Decal, 93–7316
Contact us at www.Toro.com
1
Pulley Box Side View
m–7289
All Rights Reserved
Printed in the USA
Location
(See Figure 1
for the correct
location)
1
2
U.S. English International
No existing U.S. decal 105-4674
111655 107–8456
3
Qty . 2
4
5
Qty . 2
65–2690 107–9200
92–7109 93–7009
92–7108 93-7317
2
Loading...
+ 2 hidden pages