Toro 107-3698 Installation Instructions

CE Decal Kit

107cm/122cm Vacuum Bagger for XT Series GardenTractors

Part No. 107–3698

Installation Instructions

Form No. 3350–962

Installing the Decals

Install the decals in the positions indicated in the table and graphics below. Place each International decal directly over the corresponding US English decal.

Install each decal as follows:

1. Thoroughly clean the area where you will install the

decal.

2. Dampen the area with water or mildly soapy water.

3. Peel the decal from the backing and install it in place.

Installing the Decals

4. Squeegee across the surface of the decal, starting at the

center of the decal and working toward the edges, using overlapping strokes.

Installing the Sound Decal on the Mower Deck

Note: The 105 dB sound decal is installed on either the 107cm belt cover or the 132cm mower.

Install the sound decal to the correct belt cover as shown in Figure 1.

1 4

19mm

Front View of Bagger Hood

1. Noise decal, 105–4674

2. Decal, 93–7814

 2003 by The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420-1196

3. Decal, 93–6658

4. Decal, 93–7317

107cm Cover

19mm

122 cm Cover

Figure 1

5. Decal, 93–7316 6. Decal, 93–7320

m–7291

Printed in the USA

Location

(See Figure 1

for the correct

location)

U.S. English International

No existing U.S. decal 105-4674

79–7450 93-7814

Qty . 2

79–7460 93-6658

92–7108 93-7317

93-1122 93-7316

+ 2 hidden pages