Toro 106-8252 Parts Catalogue

Form No. 3329–502

36in/42in Rear Discharge Mower
Conversion Kit

XT Series Garden Tractor

Part No. 106–8252

Parts Catalog

Ordering Replacement Parts

To order replacement parts, please supply: the part
number, the quantity, and the description of each
part desired.

Understanding Reference Numbers

Each identified part in an illustration has a reference
number. The reference number for a part also appears in
the parts list, along with other information about the part.

This catalog uses two special reference number formats,
one to indicate parts in a service assembly and another
to indicate the quantity of a given part in an illustration.

Service Assembly Reference Numbers

Parts in service assemblies have reference numbers in
the form a:b.
the entire service assembly and the b represents a
sequential number unique to each part within the service
assembly.

The a represents the reference number of

 The TORO Company — 2003

All Rights Reserved

For example, a wheel assembly might be identified by
reference number 6, the tire by 6:1, the valve by 6:2,
and the wheel by 6:3. When you order the assembly
identified by reference number 6, you receive all parts
identified by reference numbers 6:1, 6:2, and 6:3.
However, you may also order any part individually.

Reference numbers of this type appear in illustrations
and in part lists.

Reference Numbers Indicating Quantity

In an illustration, if a reference number indicates more
than one part, the reference number has the form nX y.
The n represents the quantity of the part, the X is the
multiplication symbol, and the y represents the reference
number.

For example, in an illustration, the reference number
2X 37 means that two of the parts identified by reference
number 37 are indicated.

3329–502

2

1:1

1:6

1:7

1:18

1:19

1:17

1:20

1:21

1:3

1:2

1:4

1:5

1:8

1:9

2X 1:10

1

1:23

2X 1:10

1:13

3

1:14

1:15

Pulley Box Assembly

DescriptionPart No. Qty.Ref. No. DescriptionPart No. Qty.Ref. No.

1 106–5562 1 Pulley Box ASM
1:1 106–5625 1 Upper Pulley ASM
1:2 106–5634 2 Spacer–Pulley
1:3 251–82 2 Bearing–Ball
1:4 106–5633 1 Spacer–Bearing
1:5 105–1397 2 Ferrule–Adjuster
1:6 3296–22 2 Nut–Lock NI
1:7 92–7101 2 Pulley–Flat Idler
1:8 106–5636 2 Idler Arm ASM
1:9 3231–4 2 Screw–CARR

1:10 256–156 4 Bushing–Flange
1:13 32120–47 2 Ring–Retaining,

External
1:14 106–5627 1 Lower Pulley ASM
1:15 3256–28 1 Washer–Flat
1:16 3220–7 1 Nut–Jam
1:17 106–4024 2 Rod–Tension
1:18 105–1492 2 Knob–Adjusting
1:19 933156 4 Pin–Spirol, Roll
1:20 106–9892 2 Spring–Compression
1:21 106–9888 2 Washer–Flat
1:23 65–2690 2 Decal–Surface, Hot

2 106–5631 1 Belt–PTO,Xt
3 106–9897 1 Belt–Drive (42 Rd

Conversion)

1:16

Sheet No.:2

*4 106–9910 1 Belt–Drive (36 Rd

Conv.)

* Not illustrated

2