Toro 105-1930, 105-1933, 105-1932, 105-1931 Parts Catalogue

French Decal Kit

Timecutter Z Riding Mowers

Part No. 105–1930
Part No. 105–1931
Part No. 105–1932
Part No. 105–1933

Form No. 3325–908

Parts Catalog

Ordering Replacement Parts

To order replacement parts, please supply: the part
number, the quantity, and the description of each
part desired.

Understanding Reference Numbers

Each identified part in an illustration has a reference
number. The reference number for a part also appears in
the parts list, along with other information about the part.

This catalog uses two special reference number formats,
one to indicate parts in a service assembly and another
to indicate the quantity of a given part in an illustration.

Service Assembly Reference Numbers

Parts in service assemblies have reference numbers in
the form a:b.
the entire service assembly and the b represents a
sequential number unique to each part within the service
assembly.

The a represents the reference number of

 The TORO Company — 2001

All Rights Reserved

For example, a wheel assembly might be identified by
reference number 6, the tire by 6:1, the valve by 6:2,
and the wheel by 6:3. When you order the assembly
identified by reference number 6, you receive all parts
identified by reference numbers 6:1, 6:2, and 6:3.
However, you may also order any part individually.

Reference numbers of this type appear in illustrations
and in part lists.

Reference Numbers Indicating Quantity

In an illustration, if a reference number indicates more
than one part, the reference number has the form nX y.
The n represents the quantity of the part, the X is the
multiplication symbol, and the y represents the reference
number.

For example, in an illustration, the reference number
2X 37 means that two of the parts identified by reference
number 37 are indicated.

3325–908

Contents

Description Page Description Page

Deck Height Decal Assembly 3. . . . . . . . . . . . . . . . .

Console Decal Assembly 4. . . . . . . . . . . . . . . . . . . . .

Transport Decal Assembly 5. . . . . . . . . . . . . . . . . . . .

Briggs and Stratton Engine Decal Assembly . . . . . .

Only on No. 105–1930, 105–1931,

and 105–1932 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Kohler Engine Decal Assembly

Only on No. 105–1932, 105–1932 7. . . . . . . . . . . . .

Cutting Unit Decal Assembly 8. . . . . . . . . . . . . . . . . .

Part Description Abbreviations

Part descriptions in this catalog may include the following abbreviations.

Abbreviation Meaning Abbreviation Meaning

AR as required. . . . . . . . . . . . . . . . .

ASM assembly. . . . . . . . . . . . . . . .

CARR carriage. . . . . . . . . . . . . .

DEG degrees. . . . . . . . . . . . . . . .

FH flat head. . . . . . . . . . . . . . . . .

GA gauge. . . . . . . . . . . . . . . . .

HF hex flange. . . . . . . . . . . . . . . . .

HH hex head. . . . . . . . . . . . . . . . .

HHF hex head flange. . . . . . . . . . . . . . . .

HLH hex lag head. . . . . . . . . . . . . . . .

HJ hex jam. . . . . . . . . . . . . . . . . .

HOC height-of-cut. . . . . . . . . . . . . . . .

HS hex socket. . . . . . . . . . . . . . . . .

HSBH hex socket button head. . . . . . . . . . . . . .

HSFH hex socket flat head. . . . . . . . . . . . . . .

HSH hex socket head. . . . . . . . . . . . . . . .

HWH hex washer head. . . . . . . . . . . . . . .

HWHTF hex washer head. . . . . . . . . . . . .

thread forming

HYD hydraulic. . . . . . . . . . . . . . . .

INC incorporated. . . . . . . . . . . . . . . . .

LH left hand. . . . . . . . . . . . . . . . .

NI nylon insert. . . . . . . . . . . . . . . . . .

PPH Phillips pan head. . . . . . . . . . . . . . . .

PTH Phillips truss head. . . . . . . . . . . . . . . .

PTO power take off. . . . . . . . . . . . . . . .

RH right hand. . . . . . . . . . . . . . . . .

SFH slotted fillister head. . . . . . . . . . . . . . . .

SHH slotted hex head. . . . . . . . . . . . . . . .

SQH square head. . . . . . . . . . . . . . . .

SHWH slotted hex washer head. . . . . . . . . . . . . .

SPH slotted pan head. . . . . . . . . . . . . . . .

SRH slotted round head. . . . . . . . . . . . . . . .

STD standard. . . . . . . . . . . . . . . .

TAP self tapping. . . . . . . . . . . . . . . .

TTH Torx truss head. . . . . . . . . . . . . . . .

WH wing head. . . . . . . . . . . . . . . . .

2

3325–908

1

2

Deck Height Decal Assembly

DescriptionPart No. Qty.Ref. No. DescriptionPart No. Qty.Ref. No.

1 104–8063 1 Decal–Deck Height,

Outer International

2 104–8062 1 Decal–Deck Height,

Inner International

Sheet No.:3

3

3325–908

2

3

1

Console Decal Assembly

DescriptionPart No. Qty.Ref. No. DescriptionPart No. Qty.Ref. No.

1 104–8064 1 Decal–Console

International

2 104–8086 1 Decal–Services

International

3 99–8936 2 Decal–Control, Motion

Sheet No.:4

4