Toro 104-8580 Addendum

Electric Starter Kit

Proline Mid–Size Mowers

Part No. 104–8580

Important The following instructions are for Gear

Drive Pistol Grip Mid–Size Mowers only.

Installing the Battery Holder

1. Remove left drive tire.

2. Remove the front carrier frame mounting bolt.

3. Align the battery holder so the back hole is aligned

with the carrier frame hole (Fig. 1 and 2).

Form No. 3327–359

Addendum

4. Using the battery holder as a template, mark and drill a

17/32 in. hole (Fig. 1).

m-5705

Figure 1

1. Carrier frame

2. Carrier frame hole

3. Drill a 17/32 in. hole

5. Mount battery holder to the left side of machine with 2

bolts (1/2 x 1–3/4 in.) and 2 nuts (1/2 in.) (Fig 2).

6. Peel off backing from battery pad and affix pad to

battery holder (Fig 2). Rubber battery pad should be centered on battery holder.

1. Left side of machine

2. Bolt, 1/2 x 1–3/4 in.

3. Nut, 1/2 in.

Figure 2

4. Battery holder

5. Battery pad

6. Back hole of holder

m–5706

 2001 by The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420-1196

Printed in the USA