Toro 100 Plus Series Valves Specifications

Micro-Irrigation

100 Series Plus

Application:

These heavy-duty globe/angle valves offer superior perform­ance and durability under the most demanding conditions.
The 100 Series Century Plus valve delivers a host of features
and reliable performance, which makes it suitable for agricul­tural, commercial and industrial applications.

1", 11⁄2", 2" and 3"

plastic models

Features:

Performance

• Flow range from 5-300 GPM

• Pressure range from 10-200 psi; 10-100 psi
(102 models)

• Manual internal bleed

• Manual external bleed (flush mode)

• Brass flow control stem (2 and 3-inch models)

• Flow control allows precise flow adjustment
and manual shutoff

Anti - Contamination
102 models

• Electric valves with 150-mesh external
control water filter and three-way solenoid

Quality Construction

• Glass-reinforced nylon, stainless steel and brass
construction withstands high temperatures and
system surges under pressure

• Rugged, nylon-reinforced Buna-N diaphragm
provides leak-proof seal

• Buna-N valve seat seal

• Captive plunger

• Stainless steel metering

• Molded-in and anchored studs allow positive
bonnet attachment and removal

• Easily serviced without removal from the system

• Non-continuous metering system for dirty
or effluent water applications

• Small exchange of control water allows
minimum filter capacity

• Control water filter allows easy external service

• Selectable normally open or normally
closed mode

• Working pressure range from 10-100 psi

100 Series Plus

Globe Angle Valves

Pressure Regulation

213 Models

• Manual downstream
pressure regulating valves

• Available in downstream sens­ing in 20–100 or 0–30 psi
(1,4–6,9 or 0–2 bar) range

• Self-modulating pressure regu­lator maintains constant down­stream pressure within +/- 2 psi
(0,14 bar) of pressure setting
[for in-valve sensing; within +/­1 psi (0,07 bar) for down­stream sensing]

• All flow ranges must be within
recommended range indicated
on pressure loss chart — mini­mum 15 gpm (0,9 l/s) recom­mended for 103 and 213 models

• Inlet pressure must be 15 psi
(1,03 bar) greater than desired
outlet pressure

Electrical Specifications

• Solenoid: 24 VAC

• Inrush volt-amp:
24 VAC-11.50 VA

• Inrush current: .4 amp
(102 models: .48 amp)

• Holding volt-amp:
24 VAC-5.75 VA

• Holding current: .2 amp
(102 models: .24 amp)

Optional Accessories

• Hydraulic conversion kit
(HVC-Kit)

• Reclaimed water kit
(RW60-Kit)

• DC latching solenoid
(E2002)

Example:

ow To Order:

H

A-100P 1 -LS

odel

M

-100P1 1" yes

A
A-100P1.5 1.5" yes

-100P2 2" yes

A
A-100P3 3" yes

-100P1-LS 1" no

A
A-100P1.5LS 1.5" no
A-100P2-LS 2" no

-100P3-LS 3" no

A

A-102P 1 DS

Model Size Solenoid

-102P1 1" yes

A
A-102P1.5 1.5" yes

-102P2 2" yes

A
A-102P3 3" yes

Pressure Regulating

ownstream Sensing 0–100psi

D

213P1-100DS 1" no

13P1.5-100DS 1.5" no

2
213P2-100DS 2" no

Downstream Sensing 0–30psi

213P1-30DS 1" no
213P1.5-30DS 1.5" no
213P2-30DS 2" no

ize

S

olenoid

S

Flow Rate (GPM)

Model Style Size 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 175 200 225 250 275 300

A-100P1/A-102P1
213P1-100DS
213P1-30DS

A-100P1.5/A-102P1.5
213P1.5-100DS
213P1.5-30DS

A-100P2/A-102P2
213P2-100DS
213P2-30DS

A-100P3/A-102P3
213P3-100DS
213P3-30DS

NOTES: (1) When designing a system, the industry standard for flow rate velocity through pipes and fittings is 5 Fps (2m/s).

The ToroCompany
Micro-Irrigation Business

1588 N. Marshall Avenue, El Cajon, CA 92020-1523, USA
Tel: [phone] or [phone]
Fax: [phone] or [phone]

(2) Pressure loss data is derived from valves independently tested by C.I.T., Fresno, CA.
(3) Hydraulic actuated valves vented to atmosphere will show lower pressure loss figures at low flows (HVC-Kit).
(4) Pressure regulating valves must operate in the recommended flow ranges – For the best pressure regulation the valves should

be sized at the upper end of the flow range. ex: for 100 gpm the 1

Globe

Angle 4.2 3.1 2.7 4.8 7.9

Globe

Angle 1.3 1.6 2.8 4.0 5.5 7.1 9.0 11.0 13.3

Globe

Angle 1.2 1.6 2.0 2.4 2.8 3.3 3.9 4.4

Globe

Angle 1.9 2.4 3.3 4.3 5.5 6.9 8.5

4.2 3.2 4.1 7.2 10.9

1"

11/2"

2"

3"

1.6 2.3 3.6 5.2 7.0 9.2 11.7 14.4 17.5

2.1 2.7 3.3 4.0 4.8 5.6 6.5 7.5

1

/2" valve should be specified instead of the 2" valve.

2.5 3.0 4.1 5.3 6.7 8.3 10.1

toromicroirrigation.com

ALT011 02/10

Pressure Loss PSI