Toro 09749 Specifications

ProCore® Processor
The ProCore Processor sweeps, processes and disperses aeration cores in one pass directly behind the ProCore aerator. A single operator and tractor can accomplish the work of many.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
123
ENGINE
FUEL CAPACITY
PROCESSING WIDTH
PROCESSING SYSTEM
OPERATING SPEED
ROLLER
CONSTRUCTION
HITCH SYSTEMS
CONTROLS
TRANSPORT TIRES
OVERALL WIDTH
HEIGHT
LENGTH
WEIGHT
OPTIONS
CERTIFICATION
WARRANTY
ProCore® Processor Specifications
*
PROCORE PROCESSOR, MODEL 09749
Briggs® Vanguard® 2 cylinder air-cooled 35 HP Gross, 31 HP Net, 993 cc displacement. High filtration replaceable element air filter. External spin on oil filter.
10 gallons
70 inches
Belt driven nylon brush sweeps material into chopper assembly equipped with carbide tips.
0-5 MPH
6” (15.2 cm) diameter full width rear roller.
Welded steel frame
Exclusive OnePass hitch allows attachment directly behind 3-point aerator. Offset tow hitch allows attachment to heavy duty work vehicle or tractor.
Engine mounted key switch, choke and throttle. Remote mounted kill switch and offset control.
6-ply, 18 x 9.5 - 8
88 inches
44 inches
133 inches with OnePass hitch (09753), 170 inches with Tow Hitch (09750)
2200 lbs
Rear Wheel Kit (09768), Windrow Kit (09760), SMV (Slow Moving Vehicle) Kit
ANSI B71.4-2004, OSHA, CE and EU machinery directives
Two-year or 500-hour limited warranty. Refer to Operator’s Manual for further details
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
124
Loading...