Toro 09715, 09716 Specifications
ProCore® 864 & 1298
The same ground-breaking technology that allowed the ProCore 648 to revolutionize greens aeration is available for
large-scale applications in the ProCore 864 and 1298. Aerate fairways and sports fields in efficient 64" and 98" swaths with
the smooth operation and precision performance you demand. You’ve never used a tractor-mounted aerator quite like it.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
119
AERATION WIDTH
AERATION DEPTH
TRACTOR SIZE
TRACTOR CONNECTION
TRACTOR PTO
FORWARD HOLE SPACING
(TRACTOR DEPENDENT)
LATERAL HOLE SPACING (TINE
HEAD DEPENDENT)
# OF TINE HEADS
OVERALL WIDTH
HEIGHT
LENGTH
WEIGHT
CERTIFICATION
WARRANTY
ProCore® 864 & 1298 Specifications
*
PROCORE 864, MODEL 09715 PROCORE 1298, MODEL 09716
64 inches 98 inches
5 Inches Maximum* 5 Inches Maximum*
30 HP @ PTO minimum
35 HP @ PTO recommended
3-point Category 1 or 2 3-point Category 2
540 RPM 540 RPM
Variable up to 5.0 inches Variable up to 5.0 inches
1.3 - 2.6 inches 1.3 - 2.6 inches
8 12
67.0 inches 101.0 inches
38.5 inches 38.5 inches
35.0 inches 35.0 inches
1575 lbs 2300 lbs
ANSI B71.4-1999, CE and EU machinery directives
Two-year or 500-hour limited warranty. Refer to Operator’s Manual for further details
* Hole depths greater than 4 inches can only be achieved with 6.5 inch length tines and with turf holders removed. Some degradation in hole quality may be observed in this configuration.
40 HP @ PTO minimum
50 HP @ PTO recommended
TINE HEADS
Model Tine Heads: Lateral Spacing Mount Diameter
09737 Mini Tine Head (1 row of 6) 1.3” 3/8” (10 mm)
09736 Mini Tine Head (2 rows of 5) 1.6” 3/8” (10 mm)
09739 Needle Tine Head 1.6” 5mm or 8mm
09794 3 Tine Head 2.6” 3/4” (19 mm)
09796 4 Tine Head 2.0” 3/4” (19 mm)
09797 3 Tine Head HD 2.6” 7/8” (22 mm)
09711 Quick Change 3-Tine 2.6" (6.8 cm) 3/4" (19 mm) or 7/8" (22 mm)
09719 Quick Change 4-Tine 2.0" (5.1 cm) 3/4" (19 mm) or 7/8" (22 mm)
PRODUCTIVITY RATES
Tractor Speed Spacing ProCore 864 ProCore 1298
mph (km/hr) Forward Hole Spacing sq. ft. / hr. (sq. m / hr.) sq. ft. / hr. (sq. m / hr.)
0.5 (0.8) 1.0” (25mm) 14,400 (1,338) 22,050 (2,049)
0.8 (1.2) 1.5” (38mm) 21,600 (2,007) 33,075 (3,073)
1.0 (1.6) 2.0” (51mm) 28,800 (2,676) 44,100 (4,097)
1.3 (2.1) 2.5” (64mm) 36,000 (3,345) 55,125 (5,121)
1.5 (2.5) 3.0” (76mm) 43,200 (4,013) 66,150 (6,146)
1.8 (2.9) 3.5” (89mm) 50,400 (4,682) 77,175 (7,170)
2.0 (3.3) 4.0” (102mm) 57,600 (5,351) 88,200 (8,194)
2.3 (3.7) 4.5” (114mm) 64,800 (6,020) 99,225 (9,218)
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
120
Loading...