Toro 09200 Specifications

ProCore® 648

The most productive walk greens aerator with a 48" swath. Innovative wheels-behind design eliminates crushed cores and hole damage.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

117

ENGINE

FUEL CAPACITY

ELECTRICAL

DRIVETRAIN

HYDRAULIC SYSTEM

CONSTRUCTION

TIRES

BRAKES

GROUND SPEED

INSTRUMENTATION

CONTROLS

INTERLOCKS

DIMENSIONS

CERTIFICATION

WARRANTY

Pro Core® 648 Specifications*

PROCORE 648, MODEL 09200

Kohler®, 2-cylinder, air-cooled, 23 hp (17.2 kW) gross, 19 hp (14.2 kW) net @ 3000 rpm, 41 cu-in. (674 cc) displacement. Dry, large capacity, replaceable element air filter. External spin-on oil filter, 2-quart (1.9-liter).

7.5-gallon (28.4-liter), gasoline.

12-volt, 15 amp regulated charging alternator/generator. BCI Group No.: U1 battery, 300 cold cranking amp @ 0°F. Micro-processor logic control.

3WD, Series-Parallel hydrostatic, closed loop. Variable displacement piston type pump. High-torque, low-speed wheel motor drive.

Remote spin-on filter. 3.0- gallon (13.2-liter), Mobilfluid 424 (std.) or Mobil EAL biodegradable (opt.).

Traction unit: welded steel frame. Coring head: welded steel frame with cast crank and arm assembly.

20 x 10-10, 2-ply rated, smooth tread, tubeless, inflated to 12 psi, de-mountable rims.

Dynamic braking through hydrostatic transmission service brake. Hand actuated parking brake.

Transport: Aerating:

Forward: 0-3.5 mph (0-6.4 km/h), variable Detent 1: 1.5" (3.8 cm) spacing (2 x 1.5" pattern) Reverse: 0-2.0 mph (0-3.2 km/h), variable Detent 2: 2.0" (5.1 cm) spacing (2 x 2.0" pattern) Aerating: .77-1.51 mph (1.23-2.42 km/h), variable Detent 3: 2.5" (6.4 cm) spacing (2 x 2.5" pattern) Detent 4: 3.0" (7.6 cm) spacing (2 x 3.0" pattern)

Hourmeter, tachometer.

Hand controlled bail on handle, coring head lifts and de-clutches if control bail is released. Parking brake and transaxle shift on handle. Coring head raise/lower switch on handle console. Side console with ignition, aeration spacing, manual ground follow and system reset. Aeration depth adjustment on coring head. Throttle and choke on engine.

Clutch latch, traction neutral, coring head raise/lower.

Length Width Height Wheelbase Track Width Weight (dry) Ground Clearance

104.5" (265.4 cm) 50.12" (127.3 cm) Head Raised 45" (114.3 cm) 44.5" (113 cm) 38.3" (97.3 cm) 1,590 lbs. (722 kg) 4.75" (12.1 cm) Head Lowered 36.5" (92.7 cm) Top of Handle 41.0" (104.1 cm)

ANSI B71.4-1999. CE & EU machinery directives.

Two-year or 500 hour limited warranty. Refer to the Operator’s Manual for further details.

TINE HEADS

Model Description Lateral Spacing Mount Diameter

09739 Needle Tine 1.6" (2.8 cm) N/A 09736 Mini-Tine (2 rows of 5) 1.6" (2.8 cm) 3/8" 09737 Mini-Tine (1 row of 6) 1.3" (3.3 cm) 3/8" 09794 3 Tine 3/4" 2.6" (6.8 cm) 3/4"

TINES

09796 4 Tine 3/4" 2" (5.1 cm) 3/4" 09797 3 Tine 7/8" 2.6" (6.8 cm) 7/8" 09711 QuickChange 09719 QuickChange

3-Tine 2.6" (6.8 cm) 3/4" or 7/8"

4-Tine 2" (5.1 cm) 3/4" or 7/8"

ACCESSORIES

Model Description

09220 Windrower Kit 09225 Tire Scrapers 09234 Rear Roller Kit 99-6166-01 Weight Kit 114-0590-01 QuickChange

Tool

TINES

Over 100 Titan Tines in multiple varieties available from Toro See the Toro Titan Tines Catalog or visit www.toro.com/titantines

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

118

The ProCore 648 is manufactured in Tomah, WI ISO 9002 Certified Plant.