Toro 08766, Sand Pro 5040, Sand Pro 3040 Operator's Manual

Download

Page 1

SportsFieldEdger

FormNo.3391-605RevA

SandPro

ModelNo.08766—SerialNo.315000001andUp

3040and5040TractionUnit

Registeratwww.T oro.com. OriginalInstructions(EN)

*3391-605*A

Page 2

WARNING

CALIFORNIA

Proposition65Warning

Thisproductcontainsachemicalorchemicals

knowntotheStateofCaliforniatocausecancer,

birthdefects,orreproductiveharm.

ThisproductcomplieswithallrelevantEuropeandirectives. Fordetails,pleaseseetheDeclarationofIncorporation(DOI) atthebackofthispublication.

Introduction

TheSportsFieldEdgerkitismountedtoaSandProand isintendedtobeusedbyprofessional,hiredoperatorsin commercialapplications.Itisprimarilydesignedtocreatea clean-cutedgebetweengrassyareasandunpavedbarrenareas.

Readthisinformationcarefullytolearnhowtooperateand maintainyourproductproperlyandtoavoidinjuryand productdamage.Youareresponsibleforoperatingthe productproperlyandsafely.

YoumaycontactTorodirectlyatwww .Toro.comforproduct andaccessoryinformation,helpndingadealer,ortoregister yourproduct.

Wheneveryouneedservice,genuineT oroparts,oradditional information,contactanAuthorizedServiceDealerorToro CustomerServiceandhavethemodelandserialnumbersof yourproductready.Figure1identiesthelocationofthe modelandserialnumbersontheproduct.Writethenumbers inthespaceprovided.

Figure1

1.Modelandserialnumberlocation

ModelNo.

SerialNo.

Thismanualidentiespotentialhazardsandhassafety messagesidentiedbythesafetyalertsymbol(Figure2), whichsignalsahazardthatmaycauseseriousinjuryordeath ifyoudonotfollowtherecommendedprecautions.

Figure2

1.Safetyalertsymbol

Thismanualuses2wordstohighlightinformation. Importantcallsattentiontospecialmechanicalinformation andNoteemphasizesgeneralinformationworthyofspecial attention.

Contents

Safety...........................................................................3

Preparation.............................................................3

Operation...............................................................3

Maintenance...........................................................4

SafetyandInstructionalDecals.................................5

Setup............................................................................6

1MountingtheCrossTubeAssembly........................7

2InstallingtheCutterHeadAssembly........................7

3InstallingtheHoseGuide.......................................8

Contactusatwww.Toro.com.

PrintedintheUSA

AllRightsReserved

Page 3

4RoutingtheHydraulicHoses..................................8

5CheckingtheHydraulicFluid..................................8

ProductOverview.........................................................10

Controls...............................................................10

Operation....................................................................10

OperatingtheEdger...............................................10

AdjustingtheEdgerBladeDepth.............................10

UsingtheAlignmentGuide.....................................11

Maintenance.................................................................12

LubricatingtheEdger.............................................12

ChangingtheEdgerBlade.......................................12

Storage........................................................................13

Safety

Hazardcontrolandaccidentpreventionaredependent upontheawareness,concern,andpropertraining ofthepersonnelinvolvedintheoperation,transport, maintenance,andstorageofthemachine.Improper useormaintenanceofthemachinecanresultininjury ordeath.T oreducethepotentialforinjuryordeath, complywiththefollowingsafetyinstructions.

Preparation

•ReadandunderstandthecontentsofthisOperator’ s

ManualandtheSandProOperator’ sManualbefore operatingthemachine.Becomefamiliarwithallof thecontrolsandknowhowtostopquickly.Afree replacementmanualisavailablebysendingthecomplete ModelandSerialNumbertoTheT oro®Company, 8111LyndaleAvenueSouth,Bloomington,Minnesota 55420-1196.

•Neverallowchildrentooperatethemachine.Do

notallowadultstooperatemachinewithoutproper instruction.Onlytrainedoperatorswhohavereadthis manualshouldoperatethismachine.

•Neveroperatethemachinewhenundertheinuenceof

drugsoralcohol.

•Keepallbystandersawayfromtheoperatingarea.

•Keepallshieldsandsafetydevicesinplace.Ifashield,

safetydevice,ordecalisillegibleordamaged,repairor replaceitbeforeoperationiscommenced.Alsotighten anyloosenuts,bolts,andscrewstoensurethatthe machineisinsafeoperatingcondition.

•Donotoperatethemachinewhilewearingsandals,

tennisshoes,sneakers,orshorts.Also,donotwearloose ttingclothingwhichcouldgetcaughtinmovingparts. Alwayswearlongpantsandsubstantialshoes.W earing safetyglasses,safetyshoes,andahelmetisadvisable andrequiredbysomelocalordinancesandinsurance regulations.

Operation

•Donotruntheengineinaconnedareawithout

adequateventilation.Exhaustfumesarehazardousand couldpossiblybedeadly.

•Themaximumseatingcapacityisoneperson.Never

carrypassengers.

•Sitontheseatwhenstartingtheengineandoperating

themachine.

•Usingthemachinedemandsattention.Topreventloss

ofcontrol:

–Operateonlyindaylightorwhenthereisgood

articiallight.

–Driveslowlyandwatchforholesorotherhidden

hazards.

Page 4

–Reduceyourspeedwhenmakingsharpturnsand

whenturningonhillsides.

–Avoidsuddenstartsandstops.

–Beforebackingup,looktotherearandensurethat

nooneisbehindthemachine.

–Watchoutfortrafcwhennearorcrossingroads.

Alwaysyieldtheright-of-way.

•Iftheenginestallsorthemachinelosesheadwayand

cannotmakeittothetopofaslope,donotturnthe machinearound.Alwaysbackslowlystraightdownthe slope.

•Donottakeaninjuryrisk!Whenapersonorpet

appearsunexpectedlyinorneartheoperatingarea,stop operation.Carelessoperation,combinedwithterrain angles,ricochets,orimproperlypositionedguardscan leadtothrownobjectinjuries.Donotresumeoperation untiltheareaiscleared.

•Lightningcancausesevereinjuryordeath.Iflightning

isseenorthunderisheardinthearea,donotoperate themachine;seekshelter.

•Donottouchtheengineormuferwhiletheengineis

runningorsoonafteritisstopped.Theseareascouldbe hotenoughtocauseaburn.

•Donotoverspeedtheenginebychangingthegovernor

settings.Tobesureofsafetyandaccuracy,havean AuthorizedToroDistributorcheckthemaximumengine speedwithatachometer.

•Theenginemustbeshutoffbeforecheckingtheoilor

addingoiltothecrankcase.

•Tobestprotectyourinvestmentandmaintainoptimal

performanceofyourToroequipment,countonToro genuineparts.Whenitcomestoreliability,Torodelivers replacementpartsdesignedtotheexactengineering specicationsofourequipment.Forpeaceofmind,insist onTorogenuineparts.

Maintenance

•Removethekeyfromtheignitionswitchtoprevent

accidentalstartingoftheenginewhenservicing,adjusting, orstoringthemachine.

•Performonlythosemaintenanceinstructionsdescribedin

thismanual.Ifmajorrepairsareeverneededorassistance isdesired,contactanAuthorizedT oroDistributor.

•Toreduceapotentialrehazard,keeptheenginefreeof

excessivegrease,grass,leaves,andaccumulationsofdirt. Neverwashawarmengineoranyelectricalpartswith water.

•Besurethatthemachineisinsafeoperatingconditionby

keepingnuts,bolts,andscrewstight.

•Makesurethatallhydrauliclineconnectorsaretightand

allhydraulichosesandlinesareingoodconditionbefore applyingpressuretothesystem.

•Keepyourbodyandhandsawayfrompinholeleaksin

hydrauliclinesthatejecthighpressurehydraulicuid. Usecardboardorpapertondhydraulicleaks.Hydraulic uidescapingunderpressurecanpenetrateskinand causeinjury.Fluidaccidentallyinjectedintotheskinmust besurgicallyremovedwithinafewhoursbyadoctor familiarwiththisformofinjuryorgangrenemayresult.

•Beforedisconnectingorperforminganyworkon

thehydraulicsystem,allpressureinthesystemmust berelievedbystoppingtheengineandloweringthe attachmenttotheground.

•Iftheenginemustberunningtoperformamaintenance

adjustment,keephands,feet,clothing,andotherpartsof thebodyawayfromthefanandothermovingparts.

Page 5

SafetyandInstructionalDecals

Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaofpotential danger.Replaceanydecalthatisdamagedorlost.

120-3450

1.Warning—readtheOperator'sManual,keepbystandersa safedistancefromthemachine.

2.Cuttinghazardofhandandfoot,edger—keephandsand feetawayfrommovingparts,keepallguardsandshieldsin place.

Page 6

Setup

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Crosstubeassembly Screw(3/8x3inch)

2 3

4 5

Flatwasher4 Locknut(3/8inch) Cutterheadassembly Hitchpin1 Hoseguide1 Flangenut1

Nopartsrequired

MediaandAdditionalParts

Description

Partscatalog1

Operator'sManual

Certicateofconformity

Qty.

1 4

4 1

–

Usetoreferencepartnumbers

Readbeforeoperatingthemachine

Declarationofconformity

Mountthecrosstubeassembly.

Installthecutterheadassembly.

Installthehoseguide.

Routethehydraulichoses.

Checkthehydraulicuid.

Use

Note:Determinetheleftandrightsidesofthemachine

fromthenormaloperatingposition.

Note:TooperatetheSportsFieldEdger,thetractionunit mustbeequippedwiththeRearRemoteHydraulicsKit, Model08781.IftheserialnumberoftheRearRemote HydraulicsKitispriorto310000001,youmustupdatethe RearRemoteHydraulics.ProceedtoStep1inSetup.

Page 7

MountingtheCrossTube Assembly

Partsneededforthisprocedure:

Crosstubeassembly

Screw(3/8x3inch)

4Flatwasher

Locknut(3/8inch)

Figure4

1.Crosstubeassembly

Procedure

Note:IftheSandProisequippedwiththemid-mounttool

system,removethefastenerssecuringthesaddlebracketand footguards(ifsoequipped)toeachsideofthemachine. Removeanddiscardthesaddlebrackets,footguardsand fasteners(Figure3).Supportthemid-mounttoolsystemto preventitfromlowering.

2.Securethecrosstubemountingbracketstotheframe tubeswith4screws(3/8x3inch),atwashers,and locknuts(3/8inch)(Figure4).

InstallingtheCutterHead Assembly

Partsneededforthisprocedure:

Cutterheadassembly

1Hitchpin

Procedure

1.Slidethecutterheadpivottubeontothecrosstube (Figure5).

Figure3

1.Saddlebracket

1.Fromtheleftsideofthemachine,slidethecrosstube assemblyunderthemachine,aligningthemounting bracketholeswiththeholesineachframetube(Figure

4).

2.Footguard

Page 8

Figure6

1.Hoseguide2.Hydraulictankclamp

Figure5

1.Crosstube3.Cutterhead

2.Hitchpin

2.Securethecutterheadtothecrosstubewiththehitch pin(Figure5).

InstallingtheHoseGuide

Partsneededforthisprocedure:

1Hoseguide

1Flangenut

Procedure

1.Removethebolt,washer,andnutsecuringthetop hydraulictankclamptotheframe(Figure6).Remove anddiscardtheclamp,bolt,washer,andnut.

2.Installthehoseguidewiththesuppliedangenut. PositionthehoseguideasshowninFigure6.

RoutingtheHydraulicHoses

NoPartsRequired

Procedure

1.Routethehydraulichosesthroughthehoseguideand totherearofthemachine(Figure7).

Note:Thehydraulictankclampmayhavebeen removedinapreviousstep.

Figure7

1.Hydraulichoses3.Rearremoteconnectors

2.Hoseguide

2.Connectthehosestotherearremoteconnectors (Figure7).

Note:Thehosescanbeconnectedtoeitherofthe connectors.

Page 9

CheckingtheHydraulicFluid

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Stopthemachine,movethethrottlecontroltotheSlow position,rotatetheignitionkeytoOff,andremovethe keyfromtheswitchtopreventaccidentalstarting.

3.Cleantheareaaroundthehydraulicoil-reservoircapto preventdebrisfromenteringthetank(Figure8).

Figure8

1.Oil-reservoircap

Figure9

1.Dipstick2.Fullmark

7.Iftheuidlevelislow ,slowlyllthereservoirwiththe appropriatehydraulicuiduntilthelevelreachesthe necked-downareaonthedipstick.

Note:Donotoverll.

8.Installthereservoircap.

Note:T opreventsystemcontamination,cleanthetop ofthehydraulicoilcontainersbeforepuncturingthem. Ensurethatthepourspoutandthefunnelareclean.

4.Removethecapfromthereservoir.

5.Removethedipstickfromllerneckandwipeitwith acleanrag.

6.Insertthedipstickintothellerneck;thenremoveit andchecktheleveloftheuid.

Note:Theuidlevelshouldbeuptothemark (necked-downarea)onthedipstick(Figure9).

Page 10

ProductOverview

Operation

Controls

Handle

Usethehandletoraiseandlowertheedger(Figure10).

Figure10

1.Handle

Note:Determinetheleftandrightsidesofthemachine fromthenormaloperatingposition.

OperatingtheEdger

1.Starttheengine.

2.Pressoutwardonthehandleandlowertheedgerblade totheground(Figure10).

3.EngagethebladebypullingupontheRemote Hydraulicscontrolknob(Figure12).

AlignmentGuide

Loosentheadjustmentscrewandmovethealignmentguide tothedesiredposition(Figure11).

Figure11

1.Adjustmentscrew2.Alignmentguide

Figure12

1.Remotehydraulicscontrolknob

4.Slowlymoveforward,nottravelingfasterthan1to2 mph.

5.Tostoptheedgingoperation:

•Pressoutwardonthehandleandraisetheedger

bladetothetransportposition(Figure10).

•Disengagethebladebypushingdownonthe

RemoteHydraulicscontrolknob(Figure12).

AdjustingtheEdgerBlade Depth

1.MovethethrottlecontroltotheSlowpositionand rotatetheignitionkeytoOffandremovethekeyfrom theswitchtopreventaccidentalstarting.

2.Raisetheedgertothetransportposition.

3.Removethescraperrodfromtherollershaft(Figure

13).

Page 11

Figure13

1.Roller

2.Rollershaft

3.Scraperrod

4.Removetherollershaftfromtheroller(Figure13).

5.Movetherollertothedesireddepthandinstallthe shaft.Startatthelowsetting1/2to1-1/2inches.

Note:Movingtherollerdownwillraisethecutting depth.

6.Locktherollerinpositionwiththescraperrod.

UsingtheAlignmentGuide

Thealignmentguideisusedtokeeptheedgerinastraight linebysightorwhenfollowingastringline.

1.Loosenthescrewandadjustthealignmentguideforor afttothedesiredposition(Figure11).

2.Aligntheguidewiththestringorlinedesiredtobe edged.

3.Tightenthescrew .

Page 12

Maintenance

Note:Determinetheleftandrightsidesofthemachine

fromthenormaloperatingposition.

LubricatingtheEdger

Theedgercutterheadhasagreasettingthatmustbe lubricatedwith#2general-purpose,lithium-basedgrease afterevery100hoursofoperation(Figure14).

Figure15

1.Bladewidth2.Edgerblade

4.Installthenewbladewiththescrewsandnuts previouslyremoved.

Figure14

ChangingtheEdgerBlade

Checktheedgerbladefrequentlyandreplacethebladewhen thebladewidthisreducedto1-1/4inches(Figure15).

1.Stopthemachine,movethethrottlecontroltotheSlow positionandrotatetheignitionkeytoOff,andremove thekeyfromtheswitchtopreventaccidentalstarting.

2.Raisetheedgertothetransportposition.

3.Removethe4screwsandnutsthatsecurethebladeto thecutterarm(Figure15).

Page 13

Storage

•Thoroughlywashthemachinewithagardenhose-without

anozzle-sothatexcessivewaterpressurewillnotcause contaminationanddamagetothesealsandbearing

•Checkallfastenersforlooseness;tightenasnecessary.

•Greasethetting.Wipeoffanyexcesslubricant

•Checktheedgerbladeandreplaceasrequired.

Page 14

DeclarationofIncorporation

ModelNo.

08766315000001andUp

SerialNo.

ProductDescriptionInvoiceDescription

SportsFieldEdgerVIBRATORYEDGER,QAS

GeneralDescription

VibratoryEdger

Directive

2006/42/EC

RelevanttechnicaldocumentationhasbeencompiledasrequiredperPartBofAnnexVIIof2006/42/EC.

Wewillundertaketotransmit,inresponsetorequestsbynationalauthorities,relevantinformationonthispartly completedmachinery.Themethodoftransmissionshallbeelectronictransmittal.

ThismachineryshallnotbeputintoserviceuntilincorporatedintoapprovedToromodelsasindicatedonthe associatedDeclarationofConformityandinaccordancewithallinstructions,wherebyitcanbedeclaredin conformitywithallrelevantDirectives.

Certied:EUTechnicalContact:

PeterT etteroo ToroEuropeNV B-2260Oevel-Westerloo Belgium

DavidKlisTel.003214562960 Sr.EngineeringManager 811 1LyndaleAve.South Bloomington,MN55420,USA December11,2014

Fax003214581911

Page 15

InternationalDistributorList

Distributor:

AgrolancKft BalamaPrimaEngineeringEquip.HongKong85221552163 B-RayCorporation

CascoSalesCompany

CeresS.A.CostaRica

CSSCTurfEquipment(pvt)Ltd.SriLanka CyrilJohnston&Co. CyrilJohnston&Co.RepublicofIreland

EquiverMexico525553995444ParklandProductsLtd.NewZealand6433493760 FemcoS.A.Guatemala ForGarderOU

G.Y .K.CompanyLtd. GeomechanikiofAthensGreece GolfinternationalTurizm GuandongGoldenStarChina HakoGroundandGardenSweden

HakoGroundandGarden HayterLimited(U.K.) HydroturfInt.CoDubai HydroturfEgyptLLC IrrimacPortugal351212388260T oroEuropeNVBelgium3214562960 IrrigationProductsInt'lPvtLtd.India0091442449

JeanHeybroekb.v.Netherlands3130639461 1VictusEmakPoland48618238369

Country:

Hungary3627539640

Korea82325512076

PuertoRico7877888383

NorthernIreland442890813121

Estonia3723846060

Japan81726325861

Turkey902163365993Riversa

Norway4722907760 UnitedKingdom441279723444 UnitedArabEmirates97143479479T-MarktLogisticsLtd.Hungary3626525500 Egypt2025194308ToroAustraliaAustralia61395807355

PhoneNumber:Distributor:

5062391138

94112746100

442890813121

5024423277

30109350054

862087651338 4635100000

4387

Country:

MaquiverS.A.Colombia MaruyamaMfg.Co.Inc. Mountelda.s.CzechRepublic

Mountelda.s.Slovakia

MunditolS.A.

NormaGarden OslingerTurfEquipmentSA OyHakoGroundandGarden

Perfetto PratoverdeSRL.

Prochaska&Cie RTCohen2004Ltd.

LelyTurfcare SolvertS.A.S.

SpyprosStavrinidesLimitedCyprus SurgeSystemsIndiaLimited

ValtechMorocco21253766

Japan81332522285

Argentina54114821

Russia749541 16120 Ecuador59342396970 Finland35898700733

Poland48618208416 Italy390499128

Austria4312785100 Israel97298617979 Spain Denmark4566109200 France331308177

India911292299901

Phone Number:

5712364079

420255704 220 420255704 220

9999

128

34952837500

00 35722434131

3636

EuropeanPrivacyNotice

TheInformationToroCollects ToroWarrantyCompany(T oro)respectsyourprivacy .Inordertoprocessyourwarrantyclaimandcontactyouintheeventofaproductrecall,weaskyou tosharecertainpersonalinformationwithus,eitherdirectlyorthroughyourlocalT orocompanyordealer .

TheT orowarrantysystemishostedonserverslocatedwithintheUnitedStateswhereprivacylawmaynotprovidethesameprotectionasapplies inyourcountry.

BYSHARINGYOURPERSONALINFORMATIONWITHUS,YOUARECONSENTINGTOTHEPROCESSINGOFYOURPERSONALINFORMATION ASDESCRIBEDINTHISPRIV ACYNOTICE.

TheWayT oroUsesInformation Toromayuseyourpersonalinformationtoprocesswarrantyclaims,tocontactyouintheeventofaproductrecallandforanyotherpurposewhichwetell youabout.ToromayshareyourinformationwithT oro'safliates,dealersorotherbusinesspartnersinconnectionwithanyoftheseactivities.Wewillnot sellyourpersonalinformationtoanyothercompany.Wereservetherighttodisclosepersonalinformationinordertocomplywithapplicablelawsand withrequestsbytheappropriateauthorities,tooperateoursystemsproperlyorforourownprotectionorthatofotherusers.

RetentionofyourPersonalInformation Wewillkeepyourpersonalinformationaslongasweneeditforthepurposesforwhichitwasoriginallycollectedorforotherlegitimatepurposes (suchasregulatorycompliance),orasrequiredbyapplicablelaw .

Toro'sCommitmenttoSecurityofY ourPersonalInformation Wetakereasonableprecautionsinordertoprotectthesecurityofyourpersonalinformation.Wealsotakestepstomaintaintheaccuracyandcurrent statusofpersonalinformation.

AccessandCorrectionofyourPersonalInformation Ifyouwouldliketorevieworcorrectyourpersonalinformation,pleasecontactusbyemailatlegal@toro.com.

AustralianConsumerLaw

AustraliancustomerswillnddetailsrelatingtotheAustralianConsumerLaweitherinsidetheboxoratyourlocalT oroDealer .

374-0269RevH

Page 16

ToroGeneralCommercialProductWarranty

ATwo-Y earLimitedWarranty

ConditionsandProductsCovered

TheToroCompanyanditsafliate,ToroWarrantyCompany,pursuant toanagreementbetweenthem,jointlywarrantyourT oroCommercial product(“Product”)tobefreefromdefectsinmaterialsorworkmanship fortwoyearsor1500operationalhours*,whicheveroccursrst.This warrantyisapplicabletoallproductswiththeexceptionofAerators (refertoseparatewarrantystatementsfortheseproducts).Wherea warrantableconditionexists,wewillrepairtheProductatnocosttoyou includingdiagnostics,labor,parts,andtransportation.Thiswarranty beginsonthedatetheProductisdeliveredtotheoriginalretailpurchaser. *Productequippedwithanhourmeter.

InstructionsforObtainingWarrantyService

YouareresponsiblefornotifyingtheCommercialProductsDistributoror AuthorizedCommercialProductsDealerfromwhomyoupurchasedthe Productassoonasyoubelieveawarrantableconditionexists.Ifyouneed helplocatingaCommercialProductsDistributororAuthorizedDealer,or ifyouhavequestionsregardingyourwarrantyrightsorresponsibilities, youmaycontactusat:

ToroCommercialProductsServiceDepartment ToroWarrantyCompany 811 1LyndaleAvenueSouth Bloomington,MN55420-1196

952–888–8801or800–952–2740 E-mail:commercial.warranty@toro.com

OwnerResponsibilities

AstheProductowner,youareresponsibleforrequiredmaintenanceand adjustmentsstatedinyourOperator'sManual.Failuretoperformrequired maintenanceandadjustmentscanbegroundsfordisallowingawarranty claim.

ItemsandConditionsNotCovered

Notallproductfailuresormalfunctionsthatoccurduringthewarranty periodaredefectsinmaterialsorworkmanship.Thiswarrantydoesnot coverthefollowing:

•Productfailureswhichresultfromtheuseofnon-T ororeplacement

parts,orfrominstallationanduseofadd-on,ormodiednon-Toro brandedaccessoriesandproducts.Aseparatewarrantymaybe providedbythemanufactureroftheseitems.

•Productfailureswhichresultfromfailuretoperformrecommended

maintenanceand/oradjustments.Failuretoproperlymaintainyour ToroproductpertheRecommendedMaintenancelistedinthe Operator’sManualcanresultinclaimsforwarrantybeingdenied.

•ProductfailureswhichresultfromoperatingtheProductinanabusive,

negligent,orrecklessmanner.

•Partssubjecttoconsumptionthroughuseunlessfoundtobedefective.

Examplesofpartswhichareconsumed,orusedup,duringnormal Productoperationinclude,butarenotlimitedto,brakepadsand linings,clutchlinings,blades,reels,rollersandbearings(sealedor greasable),bedknives,sparkplugs,castorwheelsandbearings,tires, lters,belts,andcertainsprayercomponentssuchasdiaphragms, nozzles,andcheckvalves,etc.

•Failurescausedbyoutsideinuence.Conditionsconsideredtobe

outsideinuenceinclude,butarenotlimitedto,weather,storage practices,contamination,useofunapprovedfuels,coolants,lubricants, additives,fertilizers,water,orchemicals,etc.

•Failureorperformanceissuesduetotheuseoffuels(e.g.gasoline,

diesel,orbiodiesel)thatdonotconformtotheirrespectiveindustry standards.

•Normalnoise,vibration,wearandtear ,anddeterioration.

•Normal“wearandtear”includes,butisnotlimitedto,damagetoseats

duetowearorabrasion,wornpaintedsurfaces,scratcheddecalsor windows,etc.

Parts

Partsscheduledforreplacementasrequiredmaintenancearewarranted fortheperiodoftimeuptothescheduledreplacementtimeforthatpart. Partsreplacedunderthiswarrantyarecoveredforthedurationofthe originalproductwarrantyandbecomethepropertyofT oro.Torowillmake thenaldecisionwhethertorepairanyexistingpartorassemblyorreplace it.T oromayuseremanufacturedpartsforwarrantyrepairs.

DeepCycleandLithium-IonBatteryWarranty:

DeepcycleandLithium-Ionbatterieshaveaspeciedtotalnumberof kilowatt-hourstheycandeliverduringtheirlifetime.Operating,recharging, andmaintenancetechniquescanextendorreducetotalbatterylife.Asthe batteriesinthisproductareconsumed,theamountofusefulworkbetween chargingintervalswillslowlydecreaseuntilthebatteryiscompletelyworn out.Replacementofwornoutbatteries,duetonormalconsumption, istheresponsibilityoftheproductowner.Batteryreplacementmaybe requiredduringthenormalproductwarrantyperiodatowner’sexpense. Note:(Lithium-Ionbatteryonly):ALithium-Ionbatteryhasapartonly proratedwarrantybeginningyear3throughyear5basedonthetime inserviceandkilowatthoursused.RefertotheOperator'sManualfor additionalinformation.

MaintenanceisatOwner’sExpense

Enginetune-up,lubrication,cleaningandpolishing,replacementoflters, coolant,andcompletingrecommendedmaintenancearesomeofthe normalservicesT oroproductsrequirethatareattheowner’sexpense.

GeneralConditions

RepairbyanAuthorizedToroDistributororDealerisyoursoleremedy underthiswarranty.

NeitherTheToroCompanynorToroWarrantyCompanyisliablefor indirect,incidentalorconsequentialdamagesinconnectionwiththe useoftheToroProductscoveredbythiswarranty,includingany costorexpenseofprovidingsubstituteequipmentorserviceduring reasonableperiodsofmalfunctionornon-usependingcompletion ofrepairsunderthiswarranty.ExceptfortheEmissionswarranty referencedbelow,ifapplicable,thereisnootherexpresswarranty .All impliedwarrantiesofmerchantabilityandtnessforusearelimitedto thedurationofthisexpresswarranty.

Somestatesdonotallowexclusionsofincidentalorconsequential damages,orlimitationsonhowlonganimpliedwarrantylasts,sotheabove exclusionsandlimitationsmaynotapplytoyou.Thiswarrantygivesyou speciclegalrights,andyoumayalsohaveotherrightswhichvaryfrom statetostate.

Noteregardingenginewarranty:

TheEmissionsControlSystemonyourProductmaybecoveredby aseparatewarrantymeetingrequirementsestablishedbytheU.S. EnvironmentalProtectionAgency(EP A)and/ortheCaliforniaAirResources Board(CARB).Thehourlimitationssetforthabovedonotapplytothe EmissionsControlSystemWarranty.RefertotheEngineEmissionControl WarrantyStatementsuppliedwithyourproductorcontainedintheengine manufacturer’sdocumentationfordetails

CountriesOtherthantheUnitedStatesorCanada

CustomerswhohavepurchasedT oroproductsexportedfromtheUnitedStatesorCanadashouldcontacttheirT oroDistributor(Dealer)toobtain guaranteepoliciesforyourcountry ,province,orstate.IfforanyreasonyouaredissatisedwithyourDistributor'sserviceorhavedifcultyobtaining guaranteeinformation,contacttheT oroimporter.

374-0253RevC