Toro 08706 Sell Sheet

FEATURES

Sand Pro® 2040Z

Another industry first in bunker

• Kawasaki® 12.2 hp (9.1 kW) gas engine

• Power steering via independent control sticks

• Unitized transmission minimizes hydraulic lines and connections

• Transport speed of 12 mph (19.3 km/h), 20% faster than current Sand Pro models

• Patent-pending “flex” tooth rake system

• Integrated nail drag/flex groomer for infield grooming (patent-pending)

• Hydraulic-powered rear attachment lift

• Two-post fixed ROPS, ISO/DIS 21299.2 certified

and infield maintenance…

The all-new Sand Pro (SP) 2040Z mechanical rake is unlike anything else

in the marketplace; a zero-turn mechanical groomer delivering unmatched

maneuverability and productivity. This unique machine is a daily bunker rake

that will reduce a golf course’s labor costs for both mechanical and hand raking

of bunkers. A brand new “flex” raking system with the patent-pending

“lift in turn” feature enables an operator to turn tightly in bunkers without

leaving unraked teardrops or tire marks.

As an infield groomer, the SP2040Z with its new nail drag/”flex” groomer

rear attachment is the perfect solution for daily infield grooming.

The nimble SP2040Z will

save you valuable time in

your workday, improving

infield surface playability

and consistency.

Call your Toro distributor at 1-800-803-8676

Sand Pro® 20 40 Z Specifications*

ENGINE

AIR CLEANER SYSTEM

FUEL CAPACITY

TRACTION DRIVE

HYDRAULIC OIL

GROUND SPEED

TIRES/WHEELS

MAIN FRAME

BRAKES

STEERING

CONTROLS/GAUGES

REAR ATTACHMENT

HYDRAULIC LIFT

ROPS

STORAGE

ELECTRICAL FEATURES

SOUND LEVEL

DIMENSIONS/WEIGHT

GROUND CLEARANCE

TIE DOWNS

WARRANTY

SAFETY CERTIFICATIONS

Kawasaki 2 cylinder, air cooled, gasoline engine; Gross HP 13.6 HP (10.1 kW), Governed HP 12.2 HP (9.1 kW) @ 2400 rpm; Max torque 27.3 ft-lbs (37.0 Nm) @1800 rpm; Displacement 36.7 cu-in. (603 cc); Oil capacity w/filter 1.7qts. w/filter (1.5 w/o filter); Oil Filter External, spin-on

Heavy duty single stage cyclonic air filter with replacement element

4.5 gals (17 liters) of unleaded gas (maximum 10% ethanol)

Belt driven independent infinitely variable unitized transmission, with automatic tensioning system.

Factory fill Mobil fluid 424 tractor transmission fluid; Left hand transmission section: 3.1qt (3.25 liters); Right hand transmission section: 3.55 qt (3.75 liters)

Forward 0-12 mph (0-19.3 km/h), Reverse 0-4 mph (0-6.4 km/h) With optional speed limiter(Model 08720) installed: Forward 0-7 mph (0-11.3 km/h), Reverse 0-4 mph (0-6.4 km/h)

Drive Wheels 25x12- 9, 3 ply rating pneumatic tubeless demountable with a Turf Tamer (knobby) tread. Front Wheel 16x7.5-8 4 ply rating pneumatic tubeless demountable with turf traction tread. Recommended tire pressure: 7 psi all tires

Rectangular structured steel tube and high strength steel plate welded construction.

Twin levers with dynamic braking through hydrostatic transmission. Hand actuated parking brake lever that controls two integral wet disc brakes contained within transmission.

Power steering, controlled through two independent control sticks with integrated dampeners. Min. turning radius: 0 in (0 cm)

Ignition: Off/Run/Start; Throttle: Low - High Idle; Choke: Open /Closes choke plate; Parking Brake: Off - On LCD logic cluster includes hour meter and safety interlocks for operator presence, neutral and parking brake.

Raise/Lower switch mounted at end of right handle.

High back cushion vinyl seat with drain hole, integrated armrest and retractable seat belt; adjustment is 4 inches fore and aft.

SEAT

Two post fixed ROPS, certified per ISO/DIS 21299.2 specifications

Built-in cup holder, rake holder and personal storage reached from seat.

12-volt system, 20-amp alternator at 3600rpm. Battery Voltage is displayed when key switch is moved from off to run (Low Battery LED will illuminate if key voltage is less than 12.3V in run position)

88dBA (Operator Ear)

with Flex Tooth Rake with Nail Drag Length: 89.0 in (226 cm) 84.8 in (215 cm) Width: 84.0 in (213 cm) 71.5 in (182 cm) Overall Height: 73.0 in (185 cm) 73.0 in (185 cm) Weight: 920 lbs (417 kg) 970 lbs (439 kg)

5.5 in (14 cm) (at machine centerline 24 in tire)

Four loops, one located on each corner of the machine.

2-year limited warranty. Refer to the Operator’s Manual for further details.

Certified to meet ANSI specification B71.4 - 2012 standards when equipped with weight kits supplied with attachments. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer. Certified to meetC-Tick 2004/108/EC/(EMC) and the CE Machinery Directive.

SAND PRO 2040Z, MODEL 08706

Wheelbase: 58.0 in 147 cm

Tread width (to centerline of tire): 46.9 in (119 cm)

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

+ 1 hidden pages