FEATURES
Workman® HDX Auto
• Toro SpeedContr’l delivers precise ground
speed during spraying and top dressing
applications
• Two-speed transmission with high
and low range
• Total vehicle payload of 3,295 lbs
(1498 kg) *
• Towing capacity 3,500 lbs (1591 kg)
®
• Kohler
28hp liquid-cooled EFI gasoline
engine
You asked for it, Toro delivered.
No manual clutch, no shifting, and no sacrifices. The same reliability, quality,
and product features you have come to expect from Toro heavy-duty utility
vehicles just got better. Toro’s all new Workman HDX Auto.
The days of slipping tires as you let out the clutch are gone. The days of training
new operators on how to drive a manual transmission are gone.
®
Powered by a 28hp Kohler
the transmission to deliver peak torque from 0-20 mph. No lack of power with this
machine, climb the most difficult terrain with a load of sand and you will forget the
bed is full.
Toro’s proprietary SpeedContr’l™ insures precise ground speed to engine speed
critical for accurate application rates with bed mounted top dressers and sprayers.
Simply select the correct position on the SpeedContr’l and you are set. Put your foot
liquid-cooled EFI engine that is optimally timed with
to the floor and maintain consistent speed
over undulating fairways and hills. Let the
transmission and the engine do the work
so the operator can focus on getting the
job done.
• Two-wheel and four-wheel drive options
* With standard suspension configuration
including installed bed.
Call your Toro distributor at 1-800-803-8676
Workman® HDX Auto Specifications
ENGINE
DISPLACEMENT
COOLING
TRANSMISSION
MAXIMUM SPEED
4WD MODEL
BASE MACHINE WEIGHT
(INCLUDES BED)
TOTAL PAYLOAD CAPACITY
(INCLUDING TWO, 200LB PASSENGERS)
CARGO BED CAPACITY
(ASSUMES TWO, 200LB PASSENGERS)
LENGTH
WIDTH
HEIGHT
CLEARANCE CIRCLE
GROUND CLEARANCE
DIFFERENTIAL LOCK
FRONT SUSPENSION
REAR SUSPENSION
BRAKES
CERTIFICATIONS
WARRANTY
TOW HITCH
28 hp (14.9 kW) Kohler® LH775 Twin-cylinder, liquid-cooled electronic fuel injection
747cc
Gasoline
FUEL
Liquid
Variable speed transmission with forward high-low range and reverse featuring Toro SpeedContr'l™
Forward low range 11 mph (17.7 km/h), Forward high range 20 mph (32.2 km/h), Reverse 13 mph (20.9 km/h)
Fully automatic on-demand, bi-directional system. Uses dual bi-directional clutches. In event of rear tire slippage, clutches transmit power proportionally to front
wheel with highest traction.
HDX Auto 2WD: 1,905 lbs (866 kg)
HDX Auto 4WD: 1,935 lbs (880 kg)
HDX Auto 2WD: 3,295 lbs (1498 kg)
HDX Auto 4WD: 3,265 lbs (1484 kg)
HDX Auto 2WD: 2,895 lbs (1316 kg)
HDX Auto 4WD: 2,865 lbs (1303 kg)
127.6” (324 cm) without bed;
130” (330 cm) with bed
64.7” (164.3 cm)
75.8” (192.5 cm) to top of ROPS
2WD Inside = 32” (81 cm); Outside = 194” (493 cm)
4WD Inside = 100” (254 cm); Outside = 300” (726 cm)
7” (18 cm) with no load
Electronic switch to engage rear differential lock
Independent suspension with dual A-frame control arms, dual coil springs and dual shock absorbers with anti-sway bar. Provides 5.75” (14.6 cm) travel.
DeDion rear axle (weight carrying axle) suspension independent of transaxle with dual leaf springs and dual shock absorbers. Provides 3” (7.6 cm) travel.
4-wheel hydraulic disc brake system
Certified to meet SAE J2258. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer.
Certified to meet the CE Machinery Directive.
Two-year limited warranty. See Operator’s Manual for further details.
600 lbs (272 kg) tongue weight
3,500 lbs (1587 kg) trailer weight
Trailers over 1,500 lbs (680 kg) require trailer brakes
WORKMAN HDX AUTO, MODEL 07390
Specifications subject to change. Please contact your Toro distributor for details.
Workman® HDX Auto Accessories
FULL AREA FLAT BED
FULL FLAT BED SIDE KIT
1/3 FLAT BED
1/3 FLAT BED STAKE SIDE KIT
2/3 FLAT BED
2/3 FLAT BED SIDE KIT
FULL FLAT BED FOLD DOWN
SIDE KIT
HIGH FLOW HYDRAULICS KIT
200 GALLON SPRAYER
VICON SPREADER
TOPDRESSER 1800
TOPDRESSER 2500
PROPASSTM 200 TOPDRESSER
PRO FORCETM DEBRIS BLOWER
1/3 VERTICAL LIFT
HARD CAB
CAB SLIDING WINDOW
DOOR KIT
CAB SOLID WINDOW DOOR KIT
CAB REAR VIEW MIRROR KIT
CANOPY
FOLDING WINDSHIELD
BRAKE & SIGNAL KIT
WORK LIGHT KIT
ROPS SIGNAL LIGHT KIT
AUTOMATIC TAILGATE RELEASE
HAND THROTTLE
SPARK ARRESTOR
PLASTIC BED LINER
HIGH AIR INTAKE KIT
REAR VIEW MIRROR KIT
Welded steel diamond plate flat bed that mounts to vehicle frame. Dimensions: 54.7 x 64.5 in (139 x 164 cm). Weight: 218 lbs (99 kg).
Long bed side panels, front panel and tailgate with a fixed pivot.
Welded steel diamond plate flat bed. Has (4) corner stake pockets for enhancing specialty mount applications. Dimensions: 21.5 x 54.7 in (55 x 139 cm).
Weight: 55 lbs (25 kg)
Formed 14-gauge steel stake sides for use with 1/3 flat bed.
Welded steel diamond plate flat bed. Dimensions: 48.1 x 54.7 in (122 x 139 cm). Weight: 161 lbs (73 kg)
Short bed side panels, front panel and tailgate with a fixed pivot for use with 2/3 flat bed. Optional tailgate release PN 92-1220.
Hinged side panels, front panel and tailgate can be folded down independently for use with full flat bed. Dimensions: 64.5 x 54.7 x 11 in (164 x 139 x 28 cm)
outside. 20 cu ft (.570 cu m) capacity. Weight = 109 lbs (49 kg)
Provides 8 gpm (30.3 liter) at 2000 psi hydraulic flow in a separate circuit to power certain attachments and accessories (standard on TC models).
200 gallon (757 liter) low profile tank sprayer with diaphragm pump and detatchable control box. Three-section, 18.5 ft (5.6 m) open boom system.
Pendulum action spreader with polyester hopper. 14.1 cu. ft. (.396 cu. m.), 750 lbs (340.5 kg) capacity. Spread width is 3 - 46 ft. (1 - 14 m).
18 cu. ft. (.504 cu. m), 1450 lbs (541 kg) capacity conveyor belt style topdresser hydraulically driven by remote hydraulics. 60 in (152 cm) spread width.
Workman bed lift cylinders raise topdresser. Spring load metering gate.
25 cu. ft. (.7 cu. m) capacity conveyor belt style topdresser towed by Workman vehicle. Textured belt, oscillating axles and all wheel drive.
Electrically activated hydraulic brakes.
21 cu. ft. / 0.54 cu. m) struck (25 cu. ft. / 0.71 cu. m heaped) capacity spin style topdresser. Tow-behind or bed mount versions.
Tow-behind, self-contained engine-driven debris blower operated with a hand-held wireless RF controller. Bed mount kit available.
An elevating, scissor-lift work platform with 600 lb (272 kg) lift capacity that can be raised from 38 in (96.5 cm) to 98 in (249 cm).
Slope indicator for safe operation. Removable over-ride key for lift controls.
Deluxe hard cab, ROPS and CE certified. Vented front glass windshield, interior dome light and a 2-speed windshield wiper. Optional heater and mirrors available.
Door kit for deluxe hard cab. Operator door has a sliding window for ventilation and ability to access exterior elements such as an identification badge security
entry. Passenger door has solid window.
Door kit for deluxe hard cab. Operator and passenger doors have solid windows.
Externally mounted to the cab frame, operator and passenger side rear view mirrors for enhancing all around visibility.
Durable, high-density polyethylene canopy with drainage outlets for moisture runoff.
Clear high-impact modified acrylic material with fold down capability.
Consists of turn signal lights for both corners in the front and rear of vehicle and brighter beam headlights.
Consists of (2) front facing and (1) rear facing work lights all mounted on top of ROPS bar.
Consists of (2) double amber warning lights and (2) single red tail lights all for mounting on top of ROPS bar. Requires either a “Right Side” or “Left Side” light kit.
Provides automatic tailgate release when dumping from cargo bed and resets automatically upon lowering of bed. Works on full or 2/3 bed with full sides.
Does not work with folding side kit.
Throttle and speed limit control that provides constant RPM for stationary attachments or a controlled maximum speed for applications such as spraying or
spreading.
Fits onto end of tailpipe.
A rugged, weatherproof one-piece plastic liner and separate tailgate liner that will protect either a full are bed with sides or a 2/3 bed with sides.
Kit for extending the air intake system from underneath the cargo bed to a position slightly above the ROPS shield behind the passenger position of the vehicle.
Recommended for dusty work applications.
A single 8 1/2” (21.6 cm) convex mirror with mounting capability on either the operator or passenger side of the vehicle.
WORKMAN HDX AUTO ACCESSORIES
Specifications subject to change. Please contact your Toro distributor for details.
Workman® HDX Auto Accessories (continued)
WORKMAN HDX AUTO ACCESSORIES
2” RECEIVER HITCH KIT
TRAILER BRAKE
WIRING KIT
TRAILER SIGNAL
WIRING KIT
REMOTE HYDRAULIC
MANIFOLD KIT
REMOTE HYDRAULIC FLOAT
4WD MANUAL CONTROL
4 POST ROPS CANOPY KIT
4 POST ROPS KIT
HEATER KIT
BACK UP ALARM KIT
Provides a 2” square receiver to enable a “drawbar” hitch.
Kit provides a controller which plugs into Workman vehicle and a positive wire to assist the hook up of customer supplied electric trailer brakes.
Kit provides electrical wire for Workman vehicle to enable easy hook up to customer supplied trailer signal and brake lights.
Hydraulic manifold kit that provides to ability to switch hydraulics between cargo bed actuation and remote port usage via use of a operator panel
mounted switch.
Hydraulic float kit that enables both hydraulic lifting and “float” in the down position. Required when using a Deere TC125 sweeper.
KIT
Allows auto 4WD to be turned off.
Canopy for use with 4-post ROPS kit.
Connects standard 2-post ROPS to 4-post ROPS. Required with 200-gallon sprayer.
Heater for use with cab. Adjustable temperature and 2-speed fan (excludes HD).
Provides an audible alarm when vehicle is in reverse.
©2014 The Toro Company
8111 Lyndale Ave. S.
Bloomington, MN 55420-1196
Printed in the U.S.A.
Specifications subject to change. Please contact your Toro distributor for details. Rev. 1/14
Loading...