Toro 07295R, 7295 Installation Instructions

Floor Mat Kit

Workman 1 100/2100 and Twister Utility Vehicle

Model No. 07295 Model No. 07295R

1. Position the machine on a level surface. Set the

parking brake, turn the ignition off, and remove the key.

Caution

If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure you or other bystanders.

Remove the key from the ignition switch before you do any maintenance.

2. Remove the 6 flange bolts and locknuts at the front of

the floor plate.

3. Attach the floor mat to the floor of the vehicle with the

existing 6 flange bolts, new washers, and existing locknuts (Fig. 1). Torque the bolts to 175–225 in.-lb. (20–25 N⋅m).

Form No. 3326-274 Rev B

Installation Instructions

1. Floor ma t

2. Flange bolt

Figure 1

m–5443

3. Washer

4. Locknut

 2001 by The Toro Company 8111 Lyndale Avenue South Bloomington, MN 55420-1196

Printed in the USA