Toro 04358 Accessory Guide

Greensmaster 3150-Q

The Greensmaster 3150-Q is the quietest

engine-powered riding greens mower

in the industr y. This is a tremendous

achievement in reducing noise for

bystanders on and near the golf course,

or the operator. In addition to superior

operator comfort, the Greensmaster

3150-Q is equipped with a wide variety

of attachments and accessories to

deliver the highest quality of cut on

var ying course conditions and mowing

Greensmaster® 3150-Q
Accessories

Greensmaster 3150-Q | 04357

• Lightweight, riding greens mower with reduced
simplied maintenance

• Signicantly reduced engine noise and lower fuel
consumption

applications.

Traction Unit Accessories

3-Wheel Drive Kit | 04474

• Features the patented Series/Parallel System for
positive traction on side and uphill operations

• Power guaranteed to the wheel that needs
it the most

• ROPS Kit included to protect operator from
injury in case of roll over situations

Thatching Reel Kit | 04496

• Vertically cuts into turf to reduce thatch and
control horizontal grass growth

• Contains tungsten carbide tip dynaBLADES
with a durable tooth profile for extremely
effective dethatching

• Tungsten carbide tip blades provide a cleaner
cut, increase thatch removal, and increase life
of blades

©2009 The Toro Company
8111 Lyndale Ave. S.
Bloomington, MN 55420-1196
Printed in the U.S.A.

Specifications subject to change.
Please contact your Toro distributor for details.

Greens Spiker Kit | 04494

• Aeration attachment

• Used to relieve soil compaction, control
organic matter, and maintain tur f health

Greens Tri-Roller Kit | 04495

• Used to roll greens and smooth surface of turf
for an improved after cut appearance

Greensmaster® 3150-Q Accessories

Traction Unit Accessories (continued)

Regular dynaBLADES | 106-6392 (set of 108)

• Replacement tungsten carbide tip dynaBLADES
for thatching reel kit

• 2 mm thick, tooth profile blades allow
topdressing to penetrate into tur f canopy

• Often used on higher growth conditions, such
as tee boxes or aprons surrounding greens

Thin dynaBLADES | 106-5422

• Thinner tooth profile dynaBLADES for
thatching reel kit

• Used for finer, more accurate dethatching on
delicate greens

Variable Traction Speed Kit | 108-6472

• Allows operator to slow and lock in traction
speeds

• Used in combination with Thatching Reel

Thatching Reel Rear Roller Asm | 95-5943

• Replace rear support buggy wheels, used on
heavily undulated greens

• Less depth penetration

Thatching Reel Rear Roller Scraper | 95-1600

• Scraper bar used to clear the thatching reel
rear roller of grass clippings and debris

Armrest Kit | 30707

• Provides additional operator comfort

Lamp | 112-9177

• Allows operator to mow in low light conditions

• Low draw LED lamp to keep battery charge

Traction Tires | 231-127

• 4-Ply 18x8.5-8

• Tires with deeper tread for additional traction

• Use on hilly or wet terrain for off-greens
applications

ROPS Kit | 105-8258

• Structure that protects operator from injury in
roll over situations

Hydraulic Oil Cooler | 105-8339

• Used in extreme climates to regulate hydraulic
oil temperature

Light Kit | 105-8336

• Allows operator to mow in low light conditions

Greensmaster® 3150-Q Accessories

Cutting Unit & Reel Options

8-Blade Cutting Unit | 04610

• Designed for mowing on higher heights of cut,
such as approaches, fairways or tee boxes

• Heights of cut above 3/8” (9.5mm)

5-Blade Heavy-Duty Reel | 106-2626

• More robust reel for mowing on rough sur faces

• Used for heights of cut above 3/4” (19mm) on
fairways and other off-greens applications

Bedknife & Bedbar Options

Microcut Bedknife | 93-4262

• Height of cut range 1/16” – 3/16” (1.6 – 4.8mm)

• Thinner blades for the most precision and
accuracy at lower heights of cut

Tournament Bedknife | 93-4263

• Height of cut range 1/8” – 1/2” (3.2 – 12.7mm)

• Recommended for heights of cut above 1/8”
(3.2mm)

• Standard equipment on 04610/04611

Low Cut Bedknife | 93-4264

• Height of cut range 3/16” – 1.0” (4.8 – 25.4mm)

• Use for mowing greens, tees, or aprons
surrounding greens

High Cut Bedknife | 94-6392

• Height of cut range 5/16”– 1.0” (7.9 – 25.4mm)

• Thicker blade for higher heights of cut, such
as tees and aprons surrounding greens

Fairway Bedknife | 63-8600

• Height of cut range 3/8” – 1.0” (9.5 – 25.4mm)

11-Blade Cutting Unit | 04611

• Designed for mowing on lower heights of cut

• Use on greens and tee boxes up to 3/8”
(9.5mm)

8-Blade Heavy-Duty Reel | 107-9522

• More robust reel for mowing rough surfaces

• Used for heights of cut above 3/8” (9.5mm)
on fairways and other off-greens applications

Extended Microcut Bedknife | 108-4303

• Height of cut range 1/16” – 3/16” (1.6 – 4.8mm)

• Use in high stress conditions and on soft turf
to prevent scalping

• Recommended for use with aggressive bedbar
in case of scalping tendencies

Extended Tournament Bedknife | 108-4302

• Height of cut range 1/8”– 1/2” (3.2 – 12.7mm)

• Use in high stress conditions and on soft turf
to prevent scalping

• Recommended for use with aggressive bedbar
in case of scalping tendencies

EdgeMaxTM Microcut Bedknife | 115-1880

• Height of cut range 1/16” – 3/16” (1.6 – 4.8mm)

• Tool steel bedknife for extended wear and
increased edge retention

EdgeMaxTM Tournament Bedknife | 115-1881

• Height of cut range 1/8”–1/2” (3.2 – 12.7mm)

• Tool steel bedknife for extended wear and
increased edge retention

EdgeMaxTM Fairway Bedknife | 112-7475

• Height of cut range 3/8” – 1.0” (9.5 – 25.4mm)

• Tool steel bedknife for extended wear and
increased edge retention

• 7-hole mount, fits all DPA cutting units

14-Blade Reel | 115-5370

• Use for extremely fine greens mowing

• Best for use at heights of cut under .100”
(2.5mm)

Aggressive Bedbar | 99-3794-03

• Designed for firm greens where a more

efficient, aggressive cut is needed for more
aggressive cultivars

• Not recommended for use in soft turf

conditions or periods of high stress

High Height of Cut Kit | 106-4699

• Enables heights of cut up to .94” (23.8mm)

Greensmaster® 3150-Q Accessories

Roller Options

Front Narrow Wiehle Roller | 04626 (set of 3)

• .200” (5mm) groove spacing, Aluminum

• 2” (5 cm) diameter

• Slightly more turf penetration than the
full roller

• Use in normal greens mowing conditions

Solid Steel Roller Kit | 04628

(

Front Wiehle & Rear Steel Rollers)

• Use on puffy fairways to control bobbing marks

• Adds weight to stabilize cutting unit over rough
surfaces

• Kit includes one steel front Wiehle roller and
one steel rear roller

Front Wide Wiehle Roller | 04627 (set of 3)

• .93” (2.4 cm) groove spacing, Aluminum

• Highest penetration into tur f

• Use for mowing higher heights of cut, e.g.
fairways and approaches

• Use for areas which are infrequently cut,
allowing longer grass blades to stand up
before cutting

Anti-Bobbing Roller | 04629

• Patented design with unprecedented results
to reduce bobbing and reduce bobbing marks

• Use for off-greens, fairway, and aprons
applications

DPA Rear Roller Brush Adaptor Kit | 114-4631

• Used in combination with Anti-Bobbing Roller

• Check parts catalog manual, may not be
required with newer models

Front Full Roller | 04625

• Steel

• Use on soft greens or high stress conditions
to prevent thinning on clean-up cut

(set of 3)

Cast Iron Rear Wiehle Roller | 71-1550

• 2” (5 cm) diameter, Cast Iron

• Special greens application to maximize turf
penetration

• May improve aftercut appearance in off-greens
applications if clumping is a problem

Note: Used in greens applications, the Cast Iron Rear

Wiehle Roller may leave grooved roller marks

Steel Narrow Wiehle Roller | 107-3510

• Adds weight to stabilize cutting unit over
rough surfaces

• Single, replacement roller

Rear Roller Adjustment Kit | 114-4630

• Eccentric bolt used to precisely level rear roller

Scraper Options

Narrow Wiehle Roller Scraper | 108-6468

Wide Wiehle Roller Scraper

Full Roller Scraper

• Narrow Wiehle, wide Wiehle, and full roller
scrapers clear rollers of dirt, grass, and debris
buildup that may impact height of cut

110-3962

|

Rear Roller Scraper | 04646

• Requires adjustment to slightly touch turf for
self cleaning

• Spring loaded, maintains contact with rear
roller

110-3961

|

(set of 3)

Steel Rear Roller | 106-6945

• Replacement rear roller

Narrow Wiehle Roller Scraper Brush | 110-3963

Wide Wiehle Roller Scraper Brush

Full Roller Scraper Brush

• Scraper brushes condition the surface of
turf before cutting, while clearing rollers
of dirt, grass, and debris buildup.

| 110-3464

110-3965

|

Rear Roller Scraper | 112-9353

• Adjustable scraper that clear rollers of dirt,
grass, and debris buildup that may impact
height of cut

Adjustable Rear Roller Scraper Kit | 112-9353

• Adjustable scraper that clear rollers of dirt,
grass, and debris buildup that may impact
height of cut

DPA Rear Roller Extension Kit | 112-9294

• Moves rear roller back to reduce clipping
build-up between the rear roller and bed bar

• Helps avoid clumping

Narrow Wiehle Roller Scraper Comb | 110-3966

Wide Wiehle Roller Scraper Comb

110-3967

|

Full Roller Scraper Comb | 110-3968

• Scraper combs condition the sur face of turf
before cutting, while clearing rollers of dirt,
grass, and debris buildup.

Anti-Bobbing Roller Scraper

• Requires adjustment to slightly touch turf for
self cleaning

• Scraper bar that clears Anti-Bobbing roller used
to reduce grass buildup, which can impact
height of cut settings

Kit |

107-9561

Greensmaster® 3150-Q Accessories

Groomer Options

Rotating Rear Roller Brush | 04640

• Prevents grass clumping on tur f

• Clears rear roller of grass buildup

Groomer | 04634 (replaces 04632)

• Maximum cutting height up to 3/4” (19mm),
maximum grooming height up to 5/8” (16mm)

• Grooming range increased for fairway and
other off-greens applications

Grooming Brush | 117-1500

(

Replaces 112-9640)

• Less aggressive grooming option

• Conditions turf to stand grass blades up for
a crisp, clean cut

• Use with 04634 or 04635

Other Cutting Unit Options

Turf Evaluator | 04399

• Mirror device used to assess turf conditions

SHIM | 106-6923

• Used to level rear roller of cutting unit

Extended Grass Shield | 107-3503-01

• Longer grass shield used to improve grass
collection on DPA cutting units

• Mainly used in very dry tur f conditions

• Covers rear of cutting unit main frame to
protect it from collecting pebbles

Maintenance Value Performance Kit –
Hydraulic Hoses

• Complete set of replacement hoses to connect
reel motors to machine

Note: DPA Cutting units on traction units F’03 and older require:

GR3150-Q

Lift Hook – 1 @ part # 105-5740

Screws – 2 @ part # 33115-025

117-2725

|